Table of Contents
Is it cheaper to build your own closet?
The cost to build a closet is between $17 and $30 per square foot. More customized projects (think, a Kim Kardashian-worthy walk-in) will cost more, while simple custom closets built into an existing space will cost less.
How do you support a closet rod?
Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.
How much does it cost to build a closet?
The cost to build a closet averages $2,011, with a typical range between $1,080 and $2,958. Prices depend primarily on size. Walk-ins are $750 to $3,500, compared to $250 to $1,500 for a reach-in. Solid wood doors and other high-end additions can run the most.
What is the average cost for a custom closet?
The national average cost for custom closets is $2,500 to $5,000, with most people spending about $3,500 for a custom closet system made of wood that measures 10 to 12 feet in size. Those on a budget can have custom closet shelving kits installed by a handyman for as little as $500 for a custom reach-in closet.
Is a custom closet worth it?
But if you plan to sell in the next 5-10 years, a custom closet might be worth the investment. After the “big four” improvements that buyers look for (kitchen, bathrooms, flooring and lighting), smaller upgrades like good storage and luxe master suites make your home that much more attractive to prospective buyers.
Do closet rods need support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How much weight can a closet rod hold?
Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.
Is a metal or wood closet rod better?
Wood rods use a shelf support and a hook for the rod. Metal rods are integral to the shelf and are supported with various wall anchors. When supporting these, you will get more support and stability when you install into the studs, regardless of whether the rod is made of wood or metal.
What can I use instead of a closet rod?
Closet rods. Closet Organizer. Closet rod systems are an easy and relatively affordable alternative to a traditional closet. Wardrobe/ Armoire. Revere Armoire. Under-the-bed Storage. Foldable Divider Organizers. Floating Shelves. Floating Wall Shelves. “Headboard” closet. Cubicle Organizer.
What is the diameter of a closet rod?
A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength. It resists breakage, and will not bend when properly supported. These dowels are most often hung between two round wall brackets secured to the wall with screws and drywall anchors.
Do Built in closets add value?
The short answer is yes, a custom closet can help with the resale value of your home with a higher return on your initial investment than other renovations. Adding a customized wardrobe to an empty spare room can make it feel like an extra bedroom, increasing the home’s value.
Can you add a closet to a room?
There are many ways to add a closet to your home: build in a wardrobe, opt for an open closet, frame out a new closet—the list goes on. It’s not difficult to add a closet, but doing so will probably be more costly than reorganizing an existing one. So exhaust all other storage options before taking the plunge.
How long does it take to build a closet?
So while a reach-in closet can be as fast as a half a day to a full day, a walk-in closet typically takes a day or two, and a room-size boutique closet can take three to four days to complete.
How much does Easy Closets cost?
How much does Easy Track cost? Easy Track’s four wall-hanging starter kits — in white, natural cherry and truffle colors — run $120 to $282. Made from commercial-grade composite panels with a laminate surface, they’re 14 to 19 inches deep and support up to 1,200 pounds per 8-foot section.
Are walk-in closets worth it?
A walk-in closet can double up as a dressing room most of the time. Some people use ironing boards in there; so you can iron, fold/hang and store your clothes — all in one place. Walk-in closets provide ample storage. A walk-in closet helps in removing clutter from both your bedroom and the master bathroom.
How far can closet rod span without support?
NOTE: 48″ maximum width without support brackets. Heavy-Duty Closet Pole 1 Closet Pole Sockets 1 pkg.
How do you install a closet rod in drywall?
To securely install a closet rod in drywall: Measure the size of the space where the closet rod will go. Buy a closet dowel rod and cut it to length. Choose a wall bracket that can be positioned so that you can screw it into wall studs. Mark the place where your first bracket will be installed. Drill pilot holes.
What is maximum length for closet rod?
The maximum pole length is 36″, and the maximum length for a continuous shelf is 40″. Your design consultant can recommend the best design to accommodate any space, no matter how wide, by combining our products to optimize your space.
Do closet rods need to be in studs?
Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
Do closets usually have studs?
Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.
