Table of Contents
How do you revive an old bookshelf?
With patience and persistence, you can revive a worn out bookcase in just a few days by refinishing it at home. Remove old paint. Sand the surface. Pay attention to details in the woodwork. Fill any dents, scratches or divots. Sand the entire bookcase a second time. Remove all traces of dust. Apply an oil-based stain.
How do you turn a bookshelf into a built in?
Step 1: Screw the bookcases together. Assemble bookcases if needed. Step 2: Cut trim for bookcases. Step 3: Attach the smaller trim. Step 4: Nail the larger trim. Step 5: Touch up and decorate built-ins.
What kind of paint do you use on bookshelves?
A flat to satin sheen is best for cabinet shelves, especially those that carry electronics or other heavy objects, but choose a semi-gloss to high-gloss sheen for the cabinet exterior to make lighter work of cleaning it.
How do you make your books look like they’re floating?
Basically, you screw one or two metal brackets into your wall and place a hardcover book on top. The secret to creating the “floating” illusion is to cut slits into the book jacket before fitting the book into place on the wall. Here are more detailed instructions on how to do that.
Can you put books on floating shelves?
Shelfology floating shelves are strong enough to hold a library of books! So, you’ve got a book collection to float on your wall. Put your worries aside friends, you’re in the right place for the solution to your bookcase design!May 17, 2021.
How do you clean old wooden shelves?
Rinse off each shelf with a solution of warm water only, then pass over the shelving with a dry rag. Be sure to wash and rinse every portion of the shelving unit, including the sides and exterior. If you’re crunched for time before a get-together, Good Housekeeping suggests using a vacuum to quick-dust the area.
How do you renovate a wooden bookshelf?
How to Refurbish an Old Bookcase Step One: Find Your ‘Trash’ Step Two: Decide Whether to Stain or Paint. Step Three: Disassemble the Bookcase. Step Four: Sand the Bookcase. Step Five: Stain and Finish the Wood. Step Six: Paint. Step Seven: Reassemble the Piece.
What type of paint is best for shelves?
The Best Paint For Pantry Shelves Because of its better coverage and ability to withstand scuffs and wear, gloss paint is the best choice for high-use areas, such as pantry shelves. Gloss paint is also easier to maintain as it will stand up to repeated cleaning from the inevitable spills.
How do you paint a bookshelf?
How to paint a bookshelf by hand: Take the hardware and doors off the bookshelf. Take the hardware off the doors. Tape off where the screws will go. Prep the bookshelf. Prime the bookshelf. Paint! Distress (optional) Seal with wax. Put the doors and new hardware on the bookshelf.
How do you paint finished bookshelves?
Use a bristle paintbrush to apply the primer and paint in the direction of the wood grain. Select an oil-based primer for oil-based paints, and a latex primer for latex paints. Allow the primer to dry for three hours. Apply a thin coat of paint on top the primer, painting in the direction of the wood grain.
How do you build a wall niche?
How to Build a Wall Niche 1 Lay Out Niche. Determine that the wall you’re cutting into is not a load-bearing or exterior wall. 2 Cut Deeply Into Wall Studs. 3 Finish Cut with a Reciprocating Saw. 4 Rip-Cut Frame Boards to Width. 5 Assemble Niche Box. 6 Trim Out Niche. 7 Fasten Niche Box.
What is the backing of a bookshelf called?
I’ve used 1/8″ luan to back a bookshelf before and it did well. It’s also known as “door skins”.
How do you fix a book shelf on the wall?
Use a stepladder and a pencil to draw a horizontal line where your bookcase meets the wall. Remove the books and move the bookcase away from the wall. Use a stud finder to search for wall studs. If possible, find two studs and secure the bookcase with two straps to ensure a good hold.
What are built-ins in a home?
Built-ins are any items that do not leave the property but remain a part of the permanent structure of a home. This includes any type of permanent appliances, cabinetry, furniture that’s built into the home, such as shelving or benches, and other attached items.
What are built-ins made out of?
The custom-made banquette (or other built-in) will be made of solid wood (like oak or maple) or a combination of solid wood and high-grade plywood. (Sometimes plywood is needed for structural reasons.).
How do you hang a floating book shelf?
To hang the shelving, you can either add holes to the back with a router (if you have access to one), or you can place holes through the back portion of the shelf into the wall. Use a level to even out the shelves, ensure that you find the studs, and drill screws through the shelf directly into the wall.
How does an invisible book shelf work?
The way these floating bookshelves work is by using a bottom hardcover book to conceal the shelves. The end result looks like the stacked books are floating in midair. You can buy an Umbra Concealed Bookshelf, which was invented by Pratt Institute student Miron Lior.
Are floating shelves strong enough for books?
Generally, the deeper your floating shelf is, the less weight it can hold, or the stronger the floating shelf bracket needs to be. For example, if you are floating a bookshelf, typically your shelf won’t need to be deeper than 10″ since most books are less than 9″ deep.
How much weight can floating shelf hold?
For every stud your bracket is attached to, your floating shelf can hold 50lbs. That means if you’ve got a three foot shelf attached to two studs, your shelf can safely hold 100 lbs. If you’ve got a two foot shelf attached to two studs, the same goes — it can hold 100 lbs.
How much weight can an Ikea floating shelf hold?
The screw configuration used matched IKEA’s installation instructions, two screws above each bracket ‘pole’ and one underside screw in the centre. IKEA’s recommended load for a shelf in this situation is maximum 5kg. Let’s see how much force we can put on it before it completely destroys the wall.
