Table of Contents
How do I get Castle Link?
Castle Link contains a proprietary interface adapter and standard USB cable with micro-B port.Set-up instructions: Download the interface software from our Software area. Plug the Castle Link into the receiver lead on your controller and attach the micro USB cable included in the kit. Connect the USB cable to your PC.
Can I use Castle Link on my phone?
With the Castle Link, you can use your Windows™ PC, Apple iPhone™, or Android phone to easily program your controller.
What is Castle Creations cheat mode?
CHEAT MODE, Castle’s High Energy Advanced Timing allows users to electronically advance their sensored motor’s timing to extreme settings. This can often yield just that extra bit of power needed to win the race. Be careful – there’s never a free lunch, extra power comes with extra motor heat!Jul 20, 2015.
How do you reset the ESC in Castle?
Move the throttle trigger to the full brake position and hold full brake. 5. After a few seconds, the motor will “ring” four times rapidly. The ESC will then blink the yellow LED and the motor will beep continuously.
What is AB Link?
A.B Link Consulting is a boutique solutions & consultancy firm specializing in data integration solutions with a focus on B2B and relevant technologies . We have unique expertise and software solutions to simplify migration of your current legacy data integration tool into a modern platform on both cloud\on premise.
What is Castle punch control?
With punch control enabled, the ESC limits this “punch” and it is a lot less severe allowing you to control the car better. The higher the punch control the higher the amount of limiting. Devigili22.
What is the difference between BEC and UBEC?
The BEC is linear while the UBEC is considered a switch mode BEC. The BEC has a more undisturbed signal an voltage and cheaper to manufacture. Adversely, they are less efficient and generate higher temperatures at greater voltages. The UBEC generally handles higher voltages, runs cooler and is more efficient.
What does BEC stand for in RC?
CC BEC (Battery Eliminator Circuit) is a small device that eliminates the need for a receiver battery. It draws voltage from the motor batteries and drops it to a voltage level that is suitable for your receiver and servos.
How many servos can BEC?
very good esc , it has a bec with switchmode that can be use up to 6 servos!Oct 26, 2008.
How many amps is a sidewinder 4?
Waterproof design ESC and splash resistant 30MM fan* 5.0 volts fixed, 2 amps Peak BEC. Audible alerts for error conditions. Enhanced drag brake functionality.
How do I reset my Brushless ESC?
To do this you go into calibrate mode on your ESC. You usually enter this mode by holding down the mode/set button until you see flashing lights. Then you set the neutral position and press the reset/set button. After this you will set full throttle and full brake.
What does Castle Link do?
Castle Link™ ESC tuning is an essential component for customizing vehicle performance for many Castle Creations’ customers. The Castle B•LINK™ Bluetooth™ Adapter enables users to wirelessly program settings on current Castle Creations ESCs, many older models and the BEC 2.0/BEC Pro on Apple iOS and now Android devices!Jan 9, 2020.
What is punch mode in ESC?
The punch is basically what others call a current limiter. It limits the amount of initial power that is allowed to go to the motor. Most ESC have this as just a single general setting. Hobbywing gives us much more control over this setting that the competition.
What is the difference between sensored and sensorless brushless motor?
All brushless motors used in RC applications have three main wires, but sensored motors have an addition multi-wire loom that connects the “brains” of the speed control to the motor. Sensorless motors simply do not have sensors inside the motor—hence the name sensorless.
Why does my brushless motor go faster in reverse?
Most motors have timing set above zero to increase RPM, if the endbell came loose and it is running retarded timing, it will be faster reverse than forward. Also, check your EPA on your radio if the motor isn’t the problem.
What is neutral range on ESC?
Neutral range. This is the ‘dead zone’ before the ESC registers a command. Another way the think of this is how far you have to squeeze the trigger before the car starts moving. I like to tune this to the transmitter for control. Most 2.4ghz transmitters are very accurate so you can turn this down to 6% if you wish.
What does Ubec mean?
Defining UBEC A UBEC (universal battery eliminator circuit) is purely a device that converts high-voltage (such as 25V from a 6S LiPo) to lower voltages to allow the full UAS to be powered from one primary battery source.
What does the Traxxas BEC do?
A Traxxas BEC is a battery eliminator circuit. The BEC allows a single battery to send less power to multiple parts of the RC car. The BEC is a component that allows RC models to carry one large battery instead of multiple smaller batteries.
What is Ubec output?
UBEC stands for universal BEC or sometimes ultimate BEC. It’s used when ESC doesn’t have built-in BEC, or standalone power system is required. They generally are more efficient, more reliable and able to provide more current than BEC.
What does BEC stand for in engineering?
A Bachelor of Engineering (abbreviated as B.E., B. Eng. or B.A.I.
Do I need a BEC for my servo?
Unless the servo draws a huge amount of current, an external BEC is not needed. IF the ESC does not have a built in BEC, then one should be wired from the battery into the battery port on the RX powering both the ESC and servo as well as the RX.
Do I need a BEC for my receiver?
Like most mini receivers, the Traxxas 2.4GHz receiver is not equipped with a BEC. Whatever voltage your receiver battery or speed control puts into the receiver is what the receiver will deliver to the servos.
