How To Distress Wood Furniture

Table of Contents

Prepare Your Space. Start by laying down drop cloths and preparing the area. Sand and Clean the Piece. Sand the surface of the piece. Paint the Piece. Apply Wax and Top Layer of Paint (Optional) Distress the Piece with Sandpaper and Steel Wool. Apply a Stain (Optional) Protect the Finished Piece with Polyurethane.

What kind of sandpaper do you use to distress furniture?

Step 3) Distressing Once your final paint coat is dry, you can start distressing it with fine-grit sandpaper. You can start with 180 grit sandpaper to see how you like the look, but feel free to experiment with other grits. The higher the number, the finer the sandpaper.

How do you get rustic effect on wood?

Liquids: White vinegar, stains, and paints are three types of fluids you may want to use for faux-aging wood. Vinegar creates a silvery-gray appearance. Stains darken the wood and highlight mechanically distressed areas. Paints can be applied in two coats, then sanded down for a weathered effect.

What does distressed wood look like?

Distressed wood has the look of being weathered and old, giving it texture and a rustic, homey appeal. In some lumber stores you can buy salvaged wood called barn wood, so named as it’s mostly salvaged from old barns which have seen many years of weathering.

How do you get white distressed look on wood?

What happens if you dont wax chalk paint?

You have to also be careful to apply wax very evenly. What happens if you don’t wax chalk paint evenly is that built-up of too much wax can attract dirt. But a thin layer of wax could allow water to penetrate so be sure to use coasters on pieces that get a lot of use.

What is chalk painting furniture?

Chalk Paint® is a decorative furniture paint specifically designed by Annie Sloan to be easy to use, quick, and reliable. Chalk Paint® very rarely requires any preparation, such as sanding or priming, and can be used indoors or outside, on just about any surface.

How do you make wood look old with vinegar and baking soda?

Cover the wood with thick coats of the baking soda paste using a standard paintbrush, then leave the wood in the sun to dry for at least six hours. If you want to either intensify the reaction or speed it up, spray the wood with white vinegar soon after applying the baking soda and water mixture.

How do you age wood GREY?

To age new wood to a natural silvery gray, to grey-brown or black patina (depending on the wood), let a small piece of steel wool (or a few non-galvanized nails) sit overnight in ordinary white vinegar, then dilute the vinegar solution 1 to 1 with water. (If you used 1/4 cup of vinegar, add 1/4 cup of water.)Oct 7, 2019.

How do you make wood look old with vinegar?

Iron vinegar on cedar – cheap, easy and fast! Soak some steel wool in white vinegar for a few hours or a few days – the longer it steeps, the darker the aged effect will be. Use 0000 steel wool (shown here) so it breaks down even faster in the vinegar.

How do you distress furniture that is not real wood?

Distressed and Antiqued Prep the fake wood’s surface by slapping a chain against it or gouging it slightly with a hammer. Wipe away debris with a clean cloth or rag. Add a base coat of paint or primer in red or dark brown. Paint a topcoat using an off-white or antique-white paint.

How do you distress furniture with vinegar and chalk paint?

Fill a spray bottle with vinegar and a smaller portion of water. After you have painted and allowed the furniture to dry, spray on the vinegar solution. Use a rag (or something a bit more abrasive) to rub the furniture and to remove some of the paint.

How do you make new wood look beat up?

This technique is subtle, so it’s done after sanding. Place a wire brush at an angle on the board and run it with the grain. This will dig out the softer wood between the grain and give the surface more texture, which really helps make new wood look old. Wire brushing is more effective on soft woods such as pine.

What is the purpose of wax over chalk paint?

Chalk paint wax will: add a sheen. enhance the colour and texture of your painted unit. protect against knocks, bumps and scratches.

How do you make chalk paint look old?

A classic antique look is easy to achieve using just one Chalk Paint® colour and a touch of Chalk Paint® Wax. So you’ve just painted a piece of furniture with Chalk Paint® but it’s looking a little too ‘new’ for your tastes.

How do you whitewash dark wood furniture?

The Best Way to Whitewash Wood Stain the wood (or leave it raw for a light finish). Mix 2 parts white paint (flat latex or matte acrylic both work fine) with 1 part water. Brush on the water/paint mixture in the direction of the wood grain. Use a clean rag to wipe off the paint in the direction of the wood grain.

Is there a whitewash stain?

Whitewash stain, or pickling, is a type of finish that you can use to brighten the look of your wood furniture and other home decor projects without hiding the wood grain. It’s one that I like – a lot – and use in our home. It’s a very popular finish because anyone can learn how to do it!Oct 18, 2021.

How do you whitewash varnished wood?

How to Whitewash Wood STEP 1: Remove the existing finish from the wood. STEP 2: Dilute white paint with water if water-based or turpentine if oil-based. STEP 3: Apply the whitewash with a paintbrush. STEP 4: Let dry between coats, then sand before any additional coats.