Table of Contents
Remove the trim around the edge of the gas fireplace, if available. Remove the fireplace surround, if required. Disconnect the fireplace from the gas line. Remove any vent apparatus.
Can you disconnect a gas fire yourself?
Can I remove a gas fire myself? To be clear, you should never attempt to remove a gas fire yourself. It is a legal requirement that this job is completed by a Gas Safe Registered engineer. The risks of tackling this as a DIY job include fire, and death through inhalation if you do not properly cap off the gas pipe.
Where is the shut off valve for a gas fireplace?
A) located just before the gas meter. This valve, often called the street-side valve, is normally a rectangular nub (Photo 1). When the long side of the nub or handle is parallel to the incoming gas line, it’s open and the gas is flowing. When it’s turned a quarter turn, perpendicular to the incoming pipe, it’s closed.
Can you remove a fireplace by yourself?
Removing a fireplace or a chimney is certainly a job you can do yourself. The reason for removing a fireplace may vary, but many reasons may be that extra space is needed, the fireplace is damaged or you just do not use it often enough.
How do I disconnect a disconnected gas fire?
How to remove a gas fire Remove fireplace surroundings. Once the fireplace trim is removed you can disconnect the gas line. Carefully remove your gas fireplace and pull it out of the surround. Plug the gas line with a safety cape and apply pipe sealing around the threads of the cap to make sure this is a tight fit.
What is behind a gas fireplace?
What Is Behind A Fireplace Surround. The area around the opening of a fireplace is called the fireplace surround, and can be made from a number of different materials including wood, stone or metal. The fireplace surround was then removed, leaving behind the cast iron fireplace back panel and the gas fireplace insert.
What tool is needed to shut off a main gas valve?
Take a 12-inch or larger adjustable wrench, and turn the valve 1/4 turn in either direction, until the valve is crosswise to the pipe. (See Diagram B) TIP: Keep a 12-inch or larger adjustable wrench with your emergency supplies, or next to your valve.
Do I need a shut off valve for gas fireplace?
As adopted and amended by 248 CMR, NFPA 54, National Fuel and Gas Code, outlines specific requirements for natural gas appliances such as outdoor fireplaces and grills. One such requirement is the need for an accessible, approved manual shutoff valve approved by the AHJ prior to installation.
How easy is it to remove a fireplace?
If it’s a wooden or tiled surround, it can be as simple as removing screws and lifting it away. You may need some help with tiled surrounds due to their weight. It’s also important to wear gloves and protective goggles if you choose to break them up with a sledgehammer.
Is removing a fireplace a good idea?
But losing a fireplace can affect a home’s appeal and possibly even its resale value, real estate pros say. A fireplace can particularly be viewed as a valuable amenity in colder climates, and removing one could even reduce the number of buyers drawn to a property, some agents say.
How do I completely remove a fireplace?
The fireplace removal process Remove or cover furniture. Check whether the chimney breast supports any of the house’s framing. Seal off doors to protect from dust. Dismantle brick-by-brick, using a cold chisel and hammer. Chisel out the mortar and remove the bricks to at least one foot below the roofline.
Can you get flueless gas fires?
Flueless gas stoves burn incredibly cleanly, using a catalytic converter to turn carbon monoxide into harmless carbon dioxide and water vapour. As these gasses are perfectly safe, they can be released back into your room without the need for a flue.
Can you replace gas fireplace with electric?
Electric inserts can be fitted into just about any existing fireplace. In order to replace a gas fireplace with an electric insert you will need to remove the existing unit, seal the gas line, and pop in the electric unit.
Is it difficult to remove a gas fireplace?
For natural vent gas fireplace inserts located within masonry fireplaces, removal can be relatively straightforward once a professional has disconnected the gas.
Do gas fireplaces need chimney cleaning?
While gas fireplaces don’t produce creosote, they do still need annual cleaning. A chimney sweeping in your gas fireplace will help remove items like bird’s nests, animals, and any debris that may have gotten trapped in there as well any potential soot. Furthermore, a chimney sweeping is often also an inspection.
What is the lever on the side of my gas fireplace?
What is this? The second handle you may find in your fireplace (usually located on the left inside panel) is a control lever for the outside air kit. When burning your fireplace, the outside air kit lever should always be in the open (or up) position.
Is it safe to turn off gas valve?
In an emergency, your gas can be turned off at the main gas service shutoff valve. Do not shut off the gas unless you smell gas, hear gas escaping, see a broken gas line or suspect a gas leak.
