Table of Contents
MERV ratings range from 1 to 20, with lower ratings denoting a lower-quality filter. MERV 1-4 Filters: Filters with a MERV rating of 1 to 4 do little to trap harmful particles in your home’s air. MERV 5-8 Filters: MERV ratings of 5 to 8 indicate a medium-quality filter that’s sufficient for most homes.
What MERV rating can my furnace handle?
The ideal MERV filters for both air filtering and furnace efficiency are 7-13, experts say. These filters can be used without any modifications to your equipment. Your system may handle MERV 14-16 with no discernable stress.
How do I find the max MERV rating on my furnace?
To determine the best MERV rating for your home and HVAC system, start with the owner’s manual. Look in the manual for the listed maximum MERV rating. Using a filter with a value higher than the recommended limit immediately affects the system’s efficiency and will ultimately lead to costly future repairs.
Will MERV 13 hurt my furnace?
Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.
Will MERV 11 hurt my furnace?
A MERV 11 air filter has a higher efficiency rating. In particular, using an air filter with a MERV rating that’s too high can damage the compressor, heat exchanger, and air conditioner coil. In most cases, a MERV 11 air filter isn’t too high for residential use.
Is MERV 8 good enough?
A MERV 8 air filter is efficient at trapping a majority of indoor particulates that could debilitate those with asthma and allergies, or even cause long-term respiratory problems.
Will MERV 12 hurt my furnace?
The short answer is this: The best MERV rating for your heating and air conditioning equipment is the MERV recommended by the manufacturer. It’s usually in the range of 8-12 MERV. When in doubt, choose a MERV 8 to MERV 10 filter rated for high airflow, so it won’t damage your furnace or air handler.
Is MERV 13 too restrictive?
At this point, it’s also important to note: MERV ratings go above 13. However, they’re too restrictive for normal home HVAC systems, and thus using them can cause potentially expensive problems.
How many MERV do I need?
We do recommend that everyone uses filters that have at least an 8 MERV rating. These filters will remove the majority of pollutants from your indoor air. If you have serious medical conditions making it difficult to breathe, you might want to get a filter with MERV 9-12 rating.
What MERV rating does Rheem recommend?
What MERV rating does Rheem recommend? Rheem recommends filters of MERV 8 and above. This MERV level is strong enough to remove substances like pollen, dust mites, dust and pet dander from the air.
What happens if furnace filter is backwards?
When a furnace filter is placed backwards, the fibers can’t do their job properly. This means your furnace has to work harder to generate the same air flow, resulting in increased energy costs. Particles are also allowed to build up irregularly, making the furnace working even harder to draw air.
Is MERV 8 good enough for Covid?
Filters with MERV-13 or higher ratings can trap smaller particles, including viruses. Many home HVAC systems will have a MERV-8 filter installed as the default. By itself, using an upgraded HVAC filter is not enough to protect people from COVID-19.
What MERV rating should I use in my house?
Using an air filter with a MERV rating of about 5 to 8 is appropriate for most residential homes. MERV 5 – MERV 8 filters provide good filtration and will remove most pollen, mold spores, and dust mites.
What does MERV 11 mean?
The MERV 11 will increase indoor air quality by removing 85% of micron sized contaminants in the air which maintains the efficiency of the HVAC unit. It is also highly recommended if there are pets in the home which can greatly reduce the air quality indoors.
What is the difference between MERV 7 and MERV 8?
A MERV 5 filter will trap up to 34%, MERV 6 will stop 35-49%, MERV 7 will prevent up to 69%, and MERV 8 will catch up to 85% of particles. These filters are slightly more restrictive than the MERV 1-4 filters and have the ability to catch mold spores and some pet dander along with dust and pollen.
Are MERV 8 filters washable?
CONSTRUCTION : The Mech 8 is the highest rated mechanical washable filter available. It has been independently tested at a MERV 8. The filter is designed for applications such as furnaces, light industrial, commercial, schools, and office buildings. The maximum temperature range on the Mech 8 is 180°F.
Is MERV 11 or 13 better?
A MERV 11 rated furnace filter can trap the majority of harmful contaminants that are present in the air. A MERV 13 filter is capable of filtering out all particle impurities like dust, lint, pollen, mold, dust mites, pet dander, smog, and smoke. On top of this, it can also trap bacteria and viruses.
How often should MERV 13 filters be changed?
For Merv 8, 11 and 13 filters, we recommend that you change your filter at least every 3 months, however changing your filter every 2 months provides better filtration which provides healthier and cleaner air in your home.
Can a furnace filter be too restrictive?
All furnace filters have a MERV rating which indicates filter efficiency. The makeup of these high-efficiency filters can be too restrictive for the unit, creating a barrier to good airflow. The HVAC system may struggle to pass air through the air filter and expend more energy in its attempts.
