Table of Contents
Measure the Width Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.
How wide should curtains be for 100 inch window?
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How much wider Should a curtain rod be than the window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
Is curtain width the width of one curtain?
Width: When we list or write curtain measurements, the width always comes before the drop. The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
How wide should curtains be for 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How wide should curtains be for 120 inch window?
For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.
How wide should curtains be for 70 inch window?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How wide should curtains be for 48 inch window?
Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
How much should curtains overlap window?
Either way, curtain panels look best when hanging higher up—making the ceiling appear taller. Keep in mind that for the curtain panels themselves, they should be two to two-and-a-half times the width of the window in larger spaces, and one to one-and-a-half times the width of the window in smaller ones.
What diameter should my curtain rod be?
Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.
How much should a curtain pole overhang?
For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again.
Do you double the width for curtains?
The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.
Are curtain measurements for one curtain or both?
Step 1: How to measure curtain width All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.
Are curtains measured width by length?
We offer a large range of widths and drops, so to find the best curtain size, start by measuring your pole or track length for the width measurement. For the width, take your steel tape measure and take the full length measurement of your pole or track.
How far should curtains be off the floor?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.
How do you measure for hanging curtain rods?
To determine the length of the rod, measure the width of your window and add eight to twelve inches. Each curtain panel should be at least as wide as your window.
Do curtain rods have to match light fixtures?
You do not need to match metal finishes in your lighting, in your hardware, in your faucets, or curtain rods. One important trick here is to keep all your lightings, whether recessed can lights,pendants,or chandeliers,no more than 6 to 7 feet from each other.
