Table of Contents
Simply put, the type of chainsaw file you need directly corresponds with the size of your chain pitch. The larger the pitch will mean the higher the cutting teeth will be. The higher the teeth will therefore mean the larger the file will need to be.
What size file do you use on a 3/8 chainsaw chain?
Yes the 7/32″ file is a perfect size for sharpening standard 3/8″ pitch chain (not 3/8″LP low profile).
What is the correct file size for .325 Stihl chain?
325″ Pitch Saw Chains. STIHL Files come specifically designed for each pitch of saw chain, with this particular round file suited for use with a . 325″ pitch chain. The file size is 4.8mm x 200mm.
How do I know what pitch my chainsaw chain is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What is a 3/8 pitch chain?
If you decide to measure the pitch yourself, just remember to measure between the middle points of 3 rivets on the chain, and then divide the number by 2. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (. 75″), which is 3/8″ (. 375″) when divided by 2.
What is the difference between .325 and 3/8 chain?
325 is a smaller top cutter and tie strap it is easier to turn for a saw . The 3/8 is a bigger top cutter and tie strap . Mainly in a 20 ” chain has more cutters in .
What’s the difference between 3/8 and 325 chain?
The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It has larger teeth and a heavier duty chain, so it requires more horsepower to operate correctly. 325-inch chain for those saws between 40 and 60 cc.
What chain does a STIHL ms170 use?
Ematic Lubrication System POWER SOURCE Gas POWERHEAD WEIGHT 8.6 lbs. GUIDE BAR LENGTH (Recommended) 16 in. OILOMATIC® CHAIN 3/8″ PMM3 CHAIN OIL CAPACITY 4.9 oz.
What does 80 mean on a chainsaw chain?
46,47,51,80 or 82 = 3/8 pitch .050 gauge. 42,48,54 or 81 = 3/8 pitch .058 gauge. 45,50 or 83 = 3/8 pitch .063 gauge.
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
Why does my chainsaw blade go dull so fast?
What is this? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast. It won’t be hard to notice whether the wood that you’re cutting is dirty or not.
What size chain is on a Stihl ms180c?
Quick Chain Adjuster (QCA) (B) POWER SOURCE Gas GUIDE BAR LENGTH (Recommended) 16 in. OILOMATIC® CHAIN 3/8″ PMM3 CHAIN OIL CAPACITY 4.9 oz. ENGINE POWER 2.0 bhp.
Does gauge matter on chainsaw chain?
The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.
What size tree can a 14 inch chainsaw cut?
Cutting down medium size trees with a trunk of about 14″ to 16” will require a larger chainsaw of about 16″ to 18” to fell the tree in one easy pass.
What size chain does a Husqvarna 450 Rancher take?
0.325 inch pitch chain with a . 050 inch gauge.
What does the pitch mean on a chainsaw chain?
Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
What is the difference between full chisel and semi chisel?
The sharp corner of the full chisel cutters split wood fibers easily and provides the fastest, most efficient cutting in clean softwood. The corner of the cutters on a semi-chisel saw chain are slightly rounded.
Is my chainsaw chain dull?
Smoke crops up even though the chain lubrication is in working order and the chain tension is correct. The chainsaw runs in one direction causing a crooked cut. This is an indication of dull cutting teeth on one side of the chain or uneven cutting teeth lengths. The chainsaw “rattles” and “bounces” during the cut.
Can I change the pitch on my chainsaw?
Yes, pitch does matter. If you change to .
How is chain pitch measured?
Measuring the pitch begins by identifying the pin of your chain. Pitch is the measurement from the center of one pin to the center of the next pin in line. The pitch helps determine the overall rated weight and strength of the roller chain.
What is the difference between STIHL Ms170 and Ms180?
The difference is with the chain oil capacity. The 170 is only capable of holding 4.9 ounces of chain oil at once. The 180 is slightly better. It can hold 5.1 ounces of oil.
What is the difference between STIHL 170 and 171?
The MS 170 has a displacement of 1.80 cu. in., fuel capacity of 8.5 oz., chain oil capacity of 4.9 oz., and powerhead weight of 8.6 lbs. The MS 171 has a displacement of 1.94 cu. Unlike the MS 170, it has tool-less fuel and oil caps with retainers and a side-access chain tensioner.
What size blade does a STIHL Ms170 have?
14 Inch Chainsaw Chain Blade for STIHL Ms170 Ms180.
