Table of Contents
The basic calculation for board feet is: Thickness x Width x Length / 12 = Board Feet. 2 x 4 x 10 / 12 = 6.667 Board Feet. A 2 x 10 -16′ has 26.67 board feet: 2 x 10 x 16 / 12 = 26.667 Board Feet. PCS x T x W x L / 12 = Board Feet. 84 x 2 x 8 x 12 / 12 = 1,344 Board Feet. 1.25 x 6 x 14 / 12 = 8.75 Board Foot.
How do you figure board feet of wood?
Board footage is calculated by multiplying the nominal thickness in inches (T) by the nominal width in inches (W) by the actual length in feet (L) and dividing by 12. The formula is: T x W x L = Board ft.
What is a board foot of lumber?
1. Hardwood lumber is typically sold by the board foot, a unit of volume equivalent to a board that is one inch thick, one foot wide and one foot long, or 144 cubic inches. These units refer to nominal or roughsawn dimensions, not surfaced dimensions.
How do you calculate board feet in a calculator?
To estimate the board feet from a log, measure the average diameter of the smaller part of the log in inches. Then, measure the length of the log in feet. Move the scale’s marker over to where these two measurements meet. Where the two measurements intersect is the approximate board foot output.
What is 200 board feet in square feet?
A 600 board foot kit will cover 600 square feet at 1 inch thickness or 300 square feet at 2 inches thick; a 200 board foot kit will cover 200 square feet at 1 inch thickness, and so on.
How do I calculate board feet in Excel?
Here is the relation: 1 board foot = 144 cubic inches = 1/12 cubic foot. Board foot formula = length * width * thickness. board foot = length(ft) * width(in) * thickness(in) / 144. board foot = length(ft) * width(ft) * thickness(in) / 12.
Is board feet a measure of volume?
The board foot is a unit of measurement for the volume of lumber often used by wholesalers and sawmills in the United States and Canada. It equals the volume of a one-foot length of a board, one foot wide and one inch thick. Board foot can be abbreviated as FBM (for “foot, board measure”), BDFT, or BF.
How many board feet are in a 1×8?
1” x 8” x 1′ = 0.67 bd. ft. 1” x 10” x 1′ = 0.83 bd.
How many board feet are in a 4×8 sheet of plywood?
Find the square footage of each space and add together to find the total square footage needed. Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2.
How do you measure for wood?
Volume of Wood The cubic feet, or volume, of a cylindrical log is given by the volume of a cylinder V=πhr2. A log with radius of 2 feet and height of 10 feet would have a volume of about 125.66 cubic feet (or ft3).
How do I calculate how much lumber I need?
You can measure board feet by multiplying length x width x thickness in inches, and then dividing by 144. If ordering a large amount by board feet, just multiply the total board feet needed by the price per board foot for the total cost.
How many square feet are in a 12×12 room?
How many square feet is a 12×12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).
How many sq ft is a board foot?
A board foot is actually a measure of volume. By definition, a board foot is one square foot, one inch thick. The most common mistake made in calculating board footage is forgetting to multiply by the thickness.
How do you calculate square footage for lumber?
Here’s how to calculate the cost of your order: The number of square feet of a piece of lumber is calculated by multiplying the length (in inches) by the width (in inches) and then dividing by 144.
Is lumber a timber?
In the US and Canada, timber is typically used to collectively refer to trees—or the wood of such trees—that have yet to be cut or processed, while lumber typically refers to wood that has been processed as a building material (boards and planks).
How do I calculate my boyfriend?
By Definition. A single board foot of lumber measures 1 inch thick, 12 inches wide and 12 inches long. The formula for calculating board feet is first to multiply thickness by width by length — in inches. Then divide the total by 144 for the total board footage of a given board.
What is the difference between a board foot and a linear foot?
Linear feet (LF) is a measurement of length of a specific sized board. Board feet (BF) is a measurement of volume which the a Board foot is 1 foot by 1 foot by 1 inch thick volume. If you have any questions about how to go about the conversions or the units feel free to ask below in the comments or contact us.
How many board feet do I need to build a house?
House Construction To keep it simple and stick to a good average, say that 6.3 board feet are required for every square foot of house. So, a 1,000 square foot home would need 6,300 board feet to complete, while 12,600 board feet would be necessary for a 2,000 square foot home.
How do you calculate board feet in a worksheet?
Quick Approximation for Calculating Board Feet 1 x 4 – divide linear length (feet) by 3 – (length x 1/3) 1 x 6 – divide linear length (feet) by 2 – (length x 1/2) 1 x 8 – multiply linear length (feet) by 0.66 – (length x 2/3) 1 x 12 – linear length (feet) equals board feet – (length x 1).
