Table of Contents
Cut pieces of paper to match the size of your tile and place the paper against your toilet so you can see where you need to cut it order to make it fit. Mark on the paper with a pencil where you need to cut. Then, transfer the marking to a tile and use tile nippers to trim the tile to fit the markings on the paper.
Do you tile around or under toilet?
To install tile properly around the toilet, you need to affix it to the floor under the fixture. Because toilets sit on top of tile, any rough cuts are hidden, making it easy to achieve the appearance of tile that has been custom-cut for your bathroom.
Can you cut a ceramic toilet?
The most common method for cutting porcelain and ceramic tiles is to use a wet saw, which is a small table saw with a diamond cutting wheel and a trough of water through which the blade passes to keep it cool.
Do I need to grout tile under toilet?
If the toilet sits securely to the floor without rocking or leaving any noticeable gaps, it is not technically necessary to grout or caulk the toilet to the floor. This is a matter of aesthetics and personal preference.
Should you remove toilet before tiling?
While it is possible to install a new linoleum or ceramic tile floor without removing the toilet, it is not recommended and actually can increase the labor involved in the project.
Do I tile under the toilet flange?
The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.
Do you tile walls before or after fitting a bathroom?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
How do you redo a bathroom floor without removing the toilet?
With peel and stick tile, there’s no need to remove the toilet. You can tile under the toilet bowl all the way to the edge of the base, then edge it with silicone caulk to create a waterproof seal. Some harder flooring materials, such as ceramic tile and hardwood, make bathroom floors more difficult.
Can you cut a toilet waste pipe?
if you have to cut the waste/soil pipe, i usually use a harksaw. flexis are handy, but i use them as a last resort. i always worry that if there is a blockage, then it wont be easy to ”snake” a pan that has a flexi connector fitted.
Can you cut porcelain tile?
You can cut your tiles with only a little practice. You can buy a tile cutter at any home improvement store. A simple, hand-operated tile cutter will work. Porcelain tile is very hard; therefore, you need a powerful wet diamond saw when you want to cut your tile.
What can I use instead of a wet saw?
An angle grinder doubles as an excellent alternative to the wet saw as it can give cuts in different amazing styles and shapes, including the L-shapes and cut, the circle, straight and square shapes and cuts. The angle grinder is perfect for producing results when the cuts and shapes are curved cuts.
How long after tiling can you put toilet back?
After you lay ceramic floor tiles, the grout inside the joints between the individual tiles must be allowed to cure. Generally, it’s safest to wait at least 48 but ideally 72 hours after installing ceramic tiles before installing a toilet.
Do you caulk around bottom of toilet?
Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?Oct 4, 2021.
Should I caulk or grout around toilet?
Caulk is quick and easy to clean up. Grout will support the toilet better. Code requires toilets to be caulked at the floor, that, IMO is a mistake. If the toilet does develop a leak, it will be restricted under the toilet and the subfloor, and may leak for a while before it is detected.
How do I reinstall my toilet after tiling?
Follow the directions provided below to set the toilet ring into the flange after tiling the floor. Step 1 – Seal the Drain Hole Before You Start Work. Step 2 – Adjust the Toilet Flange Height to the New Floor. Step 3 – Remove the Old Toilet Flange Bolts. Step 4 – Attach the Toilet Ring to the Toilet Bowl Base.
Does the toilet go on top of tile?
Yes, the toilet flange should be seated over the tile so that it can be secured tightly through the bolts. The usual method followed is to place the flange on the tile and its bottom is touching the tile. You then fix the flange with the screws ensuring they go below the thickness of the tile.
What is a toilet ring?
A toilet wax ring is a ring of molded wax on a short plastic pipe that is used to create a water tight seal between the bottom of the toilet and the drainpipe. Rubber gasket seals have in recent times proved to be an excellent alternative to wax rings.
Does a toilet flange need to be screwed to the floor?
The flange should be fastened to the floor. Dry fit the toilet to make sure it doesn’t rock. If it does rock, use shims to prevent rocking – just tightening the bolts probably will not stop the rocking but will risk cracking the toilet or breaking the flange.
What do you tile first in a bathroom?
Why You Should Tile the Floor First The tile installation principle is that the tiled wall ‘hangs’ over the tiled floor. The best way to achieve this outcome is by first tiling the floor so that the wall tile will then seem to be ‘sitting’ on the bathroom floor.
Where do you start tiling in a bathroom?
It’s best to start from the middle of the wall and work outwards. When marking the wall with your tape measure and pencil, make sure you use your spirit level to ensure all of the markings are level. At the end of this, you should have the position of all your tiles marked out on your bathroom wall.
How do you prepare a bathroom wall for tile?
How to prepare for tiling a wall: Remove old fittings, such as pins, screws, rivets etc. Repair or remove unfit plaster. Get rid of or pre-treat wallpaper (if present) Repair any cracks or signs of damage. Level the surface. Sand, so that the adhesive can bond. Make sure the surface is dust, dirt and grease-free.
Can you grind a porcelain toilet?
Porcelain toilets don’t call for cutting. The versatile angle grinder will serve you well if you need to cut through a porcelain john. Before tackling the unwieldy shape of a toilet, you should make cuts on scrap porcelain.
