Table of Contents
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
How do you cut and extrude in SolidWorks?
Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.
How do you cut a 3D object in SolidWorks?
To trim a 3D sketch: Start the 3D sketch on a 2D plane. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.
How do I cut part of a Solidworks assembly?
To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Extrude or Revolve PropertyManager.
What is revolved cut in Solidworks?
Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.
How do I create a pattern on a surface in Solidworks?
Create a part that includes a feature you want to pattern along a curve. Click Curve Driven Pattern (Features toolbar) or Insert > Pattern/Mirror > Curve Driven Pattern. In the PropertyManager, set the options. Click .
How do you extrude a body in Solidworks?
Extruding Surfaces from a 2D or 3D Face Click Insert > Surface > Extrude. Select a face: Select other faces to define the extrude as required. Select the end condition. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .
What is extrude cut?
Extruded cut feature removes material from the part. The End Condition, Draft, and Thin Feature options are same as described in Extruded Boss/Base. To create an extruded cut: 1) Sketch the profile for cut. 2) Click Extruded Cut on the Features toolbar or select Insert, Cut, Extrude on the menu bar.
How do you cut a block in Solidworks?
So I’m going to take this shape here, I’m going to revolve it around that line there. Let’s go to features and click on revolved cut. This is going to take that little shaving created donut cut. Click Ok, and now I get a half circle cut into the top of my shape here.
What is fillet in Solidworks?
Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops.
How do you edit a part in assembly in SolidWorks?
To edit a part while in an assembly: Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. Make the necessary changes to the part.
How do you indent in SolidWorks?
To create indent features: Click Indent (Features toolbar) or Insert > Features > Indent. In the PropertyManager, under Selections: Select a solid or surface body to indent in the graphics area for Target Body . Under Parameters: Set the Thickness (solids only) to determine the thickness of the indent feature. Click .
What is extruded boss in SolidWorks?
The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.
How do you cut a revolve?
Creating a revolved cut From the main menu bar, select ShapeCutRevolve. If desired, specify the method you want to use to select an origin for your sketch of the revolved cut feature. Select the planar face from which the cut will be revolved.
What is the use of trim entities?
The Trim Entities tool is mainly used for removing unwanted parts or portions from your design sketch. For trimming, you must have coincident sketch parts with another. The Sketch Trim Entities also consist of “Extend Entities” tool, which helps to extend or adjusting the lines.
Which tool would you use to cut a hole through the object?
A hole may be drilled or bored; awls, gimlets, and augers also produce holes. An awl is the simplest hole maker, for, like a needle, it simply pushes material to one side without removing it. Drills, gimlets, and augers, however, have cutting edges that detach material to leave a hole.
How do you make a rib in Solidworks?
To create a rib: Sketch the contour to use as the rib feature on a plane that intersects the part, or is parallel or at an angle to an existing plane. Click Rib (Features toolbar) or Insert > Features > Rib. Set the PropertyManager options. Click OK .
How do you cut a linear pattern in Solidworks?
Step 1: Select Linear Pattern and choose the axis that you wish the pattern along the axis. Step 2: Select the Features and Face, in this case which is the extrude cut in the part. Step 3: Check the box “Instance to Vary”. Step 5: We will need to change the increment of the length and width of this cut.
How do I fill a pattern in Solidworks?
To create a fill pattern, click Fill Pattern (Features toolbar) or Insert > Pattern/Mirror > Fill Pattern, set the PropertyManager options, and click . Parameters control the pattern layout. You can create a sheet metal perforation-style pattern, or a pattern of concentric shapes typically used to enhance aesthetics.
What is pattern seed only in Solidworks?
Pattern seed only option selected. The seed feature only is replicated in Direction 2. The entire linear pattern is replicated in Direction 2. Search ‘Example of Linear Pattern Seed Feature’ in the SOLIDWORKS Knowledge Base.
