Table of Contents
Can you put an undermount sink under a laminate countertop?
You may have heard that you can’t have an undermount sink with a laminate countertop, but that’s old news. Yes, you CAN have an undermount sink!.
How do you cut a sink hole in a wood countertop?
To cut a hole for a sink, it’s easiest to use a jigsaw, which allows for great control. Always, always, always use a new jigsaw blade. An old or dull blade can chip the laminate along the cutting line. Drill two starter holes in opposite corners just inside the cutting line.
Can you install an undermount sink as a drop in?
There is no room for error and needs to be is tight as possible allowing the narrow rim as much support underneath as possible. Undermounts are missing a mounting rail and brackets to hold it from shifting. If you’ve got 1″ or more of counter under the lip of the sink, you can embed it in waterproof adhesive-caulk.
What kind of countertop can have an undermount sink?
Because these sinks tend to be deeper and weigh more — especially with a sink full of dishes — they require solid weight-bearing and water-resistant countertop materials. Laminate or tile countertops are not well-suited to this type of sink. Marble, quartz, granite and concrete countertops are the best options.
What is Overmount sink?
Also called top-mount or drop-in sinks, overmount sinks have a lip that sits above, and covers a small area of, the countertop. This is an example of an overmount, stainless steel, double bowl sink.
Do undermount sinks need clips?
A sink can be installed without clips, but it requires the proper installation tools and techniques. Undermount sinks are one of the hottest trends in remodeling right now. However, they can be more challenging to install than traditional countertop sinks because they do not use clips to attach to the countertop.
How do you mount an undermount sink to a wood countertop?
To do this, hold a clip against the underside of the rim and perpendicular to the side of the sink, then drive a 1-inch wood screw through the machined hole in the clip and into the underside of the countertop. Repeat this, and install a pair of clips, evenly spaced, at the opposite side of the sink.
Can you do undermount sink with wood countertops?
Wood Countertops with Undermount sinks are the most popular style of sink we accommodate. The undermount sink style is our preferred style of sink to use with wood countertops. They provide a clean line on the surface and also enable us to incorporate drainboards when used with Durata® waterproof finish.
What blade do I use to cut laminate countertop?
Cutting a post-form laminate countertop to length requires a clean, straight cut. The best DIY tool for the job is a circular saw with a fine-tooth carbide blade made for laminate (the same blades are typically sold for non-ferrous metals and other types of plastics). You can also use a jigsaw with a fine-tooth blade.
How do you cut and join a laminate countertop?
Measure and cut the laminate countertops to the desired size. When connecting two pieces along a run, such as in a galley kitchen, make the cuts straight across at a 90 degree angle. For joining in a corner, the pieces should be cut at a 45 degree angle. Sand down any rough edges with a sander or file.
Can an undermount sink be replace with an Overmount sink?
Replacing an overmount sink with an undermount sink will hide the sink lip underneath a countertop and provide clean, modern lines. Replacement steps involve disconnecting plumbing, removal of the old overmount sink, installing the new sink and reconnecting the plumbing.
Can you replace an undermount sink without removing the countertop?
Answered by Todd’s Home Services: The short answer is yes it can be replaced. However, I do recommend having a granite contractor do the replacement. The adhesive used to hold the sinks under the top is very strong once adhered. It will likely have to be cut and ground out from the underside.
What’s the difference between undermount and drop in sinks?
Undermount sinks are bolted to the bottom of a countertop. Drop-in sinks are installed directly through the top of the countertop. Drop-in sinks have a lip framing the sink which, over time, collects dust and residue. This raised lip prevents you from sweeping the countertop debris directly into the sink.
Do undermount sinks fall?
A common issue with the undermount design is that they can be prone to sagging over time. When the sink starts pulling away from the countertop, leaving a gap, it needs to be hiked back up and secured in place. Undermount sinks work best with solid granite, marble, or concrete counters.
Can undermount sink be used with solid surface countertops?
In the typical undermount installation where the seam is visible, the sink can be glued or mechanically fastened under the countertop or both. Solid surface and Karran stainless steel sinks can both be undermounted seamlessly. All types (granite and cast iron included) can all be undermounted in a non-seamless fashion.
How is quartz countertop sold?
Some quartz makers sell exclusively through big-box stores; other slabs are available only through independent kitchen and bath showrooms.
