Table of Contents
Can you cut tiles around a toilet?
It is almost impossible to cut flooring, especially ceramic tile or wood, precise enough to fit snugly around a toilet base. The finished product usually results in an uneven and thick joint around the toilet base, a joint that will require additional caulk or grout to conceal.
How do you cut bathroom tiles without chipping?
Using manual hand tools is the best way to cut porcelain tile without chipping when you can’t afford fancy tools. You may apply multiple hand tools to cut the tile. But the best way is to use a tile nipper.
Should tile go under toilet flange?
5 Answers. The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.
Should I tile around or under toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
How do I stop my tiles from cracking when I cut them?
Because of the compressed, fragile nature of tile, it can crack, break and fragment when you try to cut it. The best way to keep tile from cracking is to use a score-and-snap tile cutter or a diamond wet saw.
How do you cut porcelain tile already installed?
Turn the angle grinder so the blade will meet the tile perpendicularly. Turn on the grinder and push the blade straight down into the tile and its backing. Once you have cut through, you can pull the blade back for a short cut, or push the blade away from you to continue cutting through the tile for longer cuts.
Is toilet flange supposed to be level with floor?
When you install your toilet flange, it should be installed on top of the finished floor, and it should also be installed perfectly level. If your flange sits even or below the floor, then it’s wrong. These rings will prevent the toilet from properly recessing into the flange. Instead, use a standard ¾ inch wax ring.
Do you put flooring down before toilet?
If you’re installing a new floor, pedestal sink, and toilet, you should install the laminate flooring first so it’s under the sink and toilet. By installing the flooring first, you will also be able to more easily switch up cabinetry or fixtures, without having gaps in the flooring.
How far above finished floor should toilet flange be?
The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal. If you recently tiled or changed the bathroom flooring, the flange height is likely less than optimal.
Can you install a toilet on top of vinyl plank flooring?
It’s considered best practice to always put a toilet on top of the flooring, whether the floor is made of wood, vinyl, tiles, etc. Not only will placing the toilet on top of the vinyl plank flooring generally look better, but it also ensures that the weight of the toilet is held by the floor and not the pipes.
How do you reset a toilet after tiling?
Follow the directions provided below to set the toilet ring into the flange after tiling the floor. Step 1 – Seal the Drain Hole Before You Start Work. Step 2 – Adjust the Toilet Flange Height to the New Floor. Step 3 – Remove the Old Toilet Flange Bolts. Step 4 – Attach the Toilet Ring to the Toilet Bowl Base.
Can you raise an existing toilet flange?
A toilet flange extender fits over the existing flange to raise the drain connection in relation to the surrounding flooring. (Plastic flanges typically can’t be removed because they’re glued to the drain pipe.) Some flange extenders are plastic rings that come in various thicknesses.
What if my toilet flange is too low?
Low toilet flange is a common problem when installing a new (or in my case thicker mortar base). Unless your toilet is properly mated and sealed to the waste pipe, you may face problems related to sewer gas odor (it’s very unhealthy and unpleasant) and/or fluid leaks.
Do you tile walls before or after fitting a bathroom?
Why You Should Tile the Floor First The tile installation principle is that the tiled wall ‘hangs’ over the tiled floor. The best way to achieve this outcome is by first tiling the floor so that the wall tile will then seem to be ‘sitting’ on the bathroom floor.
What comes first tile or toilet?
Always install tile before the toilet – the toilet is the last thing to be installed along with your faucet, and shower nozzle.
Why do tiles crack when cutting?
Angle grinders spin much faster than wet cutters so you must ensure you have the right blade. Using the wrong blade on an angle grinder can cause friction making the tile to heat up very fast, often causing cracking and chipping.
What causes tile to crack when cutting?
These cracks usually form when the tiles are weakened due to the cut – either partial or multiple – and especially where they are cut to form the corners or edges. Technically – anything which interrupts the continuity of the material can make these places more fragile and very delicate points of the tile.
What kind of blade Do I need to cut porcelain tile?
Diamond blades are circular shaped saws used for sawing and cutting construction materials. Tile installers use these types of saws on remodeling or new construction projects, when they need to cut tile, concrete, porcelain and other materials.
Are porcelain tiles hard to cut?
It’s made with heat and pressure, so the result is a harder and denser material than ceramic. Particularly within areas that require a lot of cutting and specific cuts in order to install your tiles neatly, porcelain is much harder to cut and often will require a more professional cutter to cut to the same effect.
