Table of Contents
How close should tile be to toilet flange?
When you’re tiling around an already-installed toilet, plan out your pattern so that at there is at least 2 in (5.1 cm) of space between the base of the toilet and the edges of any of the tiles you’ll be laying around it.
Can you cut ceramic tile by hand?
To cut ceramic tile by hand without a tile cutter: Place a square on the tile slightly away from the mark. Use a glass cutter to score the tile on the cut line. Press down on either side of the tile to break the tile along the score line. If needed, smooth the cut by rubbing the edge on concrete or a brick.
What is the best drill bit for ceramic tiles?
A carbide-tipped masonry bit is the best drill bit to use for bathroom ceramic tile. Regular twist-drill bits can’t cut through the fire-hardened glaze.
How do you cut tile without cracking it?
Because of the compressed, fragile nature of tile, it can crack, break and fragment when you try to cut it. The best way to keep tile from cracking is to use a score-and-snap tile cutter or a diamond wet saw.
Should the toilet flange be flush with tile?
The bottom of the flange must be flush with the tile, no gaps, or it could end up too high. You don’t want a large wax depth from having it too low and if it is too high, the toilet will rock. The seal is engineered to work best with the flange on top of the finished floor.
Does a toilet flange need to be flush with the floor?
The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too. The spacing of the toilet exit “horn” and sealing surface is designed for this height.
Does the toilet flange sit on top of tile?
Yes, the toilet flange should be seated over the tile so that it can be secured tightly through the bolts. The usual method followed is to place the flange on the tile and its bottom is touching the tile. You then fix the flange with the screws ensuring they go below the thickness of the tile.
Can you cut ceramic tiles without a tile cutter?
There are several methods for cutting tiles by hand without a tile cutter, using a cutting tool such as a glass cutter or a carbide-tipped pencil. Place the scored tile over a wire hanger on a flat surface, aligned with the scored line. Press gently on both sides of the tile until it snaps cleanly.
Can you cut porcelain tile without a wet saw?
Using manual hand tools is the best way to cut porcelain tile without chipping when you can’t afford fancy tools. But the best way is to use a tile nipper. Especially when you need a circular cut in the tile, cutting those areas is difficult with other tools such as a wet cutting saw.
Can you install a toilet on top of vinyl plank flooring?
It’s considered best practice to always put a toilet on top of the flooring, whether the floor is made of wood, vinyl, tiles, etc. Not only will placing the toilet on top of the vinyl plank flooring generally look better, but it also ensures that the weight of the toilet is held by the floor and not the pipes.
Should I tile around or under toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
Do you need a special drill bit to drill tile?
Drilling through tiles isn’t as easy as drilling through wood or other soft material, therefore you’ll need a power drill with a specialist carbide-tipped or diamond-tipped drill bit. Ensure your drill bit isn’t worn out or damaged as it will likely damage the surface of the tile whilst drilling.
Do I need a hammer drill for tile?
Do not use a hammer drill setting when drilling tile. This rapid pounding will crack the tile in almost all cases. Keep nice steady pressure on the drill and before you know it, you’ll have created your hole. Large-diameter holes can be created in ceramic tile using diamond-tipped hole saws.
What causes tile to crack when cutting?
These cracks usually form when the tiles are weakened due to the cut – either partial or multiple – and especially where they are cut to form the corners or edges. Technically – anything which interrupts the continuity of the material can make these places more fragile and very delicate points of the tile.
Where should a toilet flange sit?
In a typical toilet installation, the floor flange that sits inside the drain opening below the toilet should be positioned so that its bottom surface rests flush against the finished floor or no more than 1/4 inch above or below the floor.
Can a toilet flange be too high?
When your toilet flange is too high, your toilet may leak water and rock back and forth when used. Both the leaking and the rocking can warp or break the floor. A leaking flange can also rot the subfloor and lead to the accumulation of mildew and mold.
How do you install a toilet when the flange is too low?
Installation process is simple: install the gasket on top of the toilet flange on the floor, add spacer rings to match the new floor surface level, add the extender, add a standard wax ring the set the toilet on top. I like the product but I see some potential issues: Set-Rite spacer rings are hollow.
