Table of Contents
What angle do you cut baseboards?
Using a miter box or a power miter saw, cut the baseboard at a 45-degree angle. Before nailing it in place, mark the second piece the same way, and test for fitting. Use 1-1/4″ or 1-1/2″ brads to close the corner.
What size Mitre saw for baseboards?
Compound Miter Saws For precise cuts, a 6-inch baseboard needs to be laid flat in an 8-1/2 inch saw to slice off a partial degree. The larger 10- and 12-inch models allow the 6-inch board to rest upright against the miter fence.
What angle do you cut molding for a 45-degree angle?
Generally, you need two 45-degree cuts to equal the 90-degree angle of a corner, and you need to make sure the cuts are going in the right direction and on the right ends of the wood. One way to simplify things is to cut your corner angles first, then measure and cut the other ends of the trim to fit the walls.
How do you calculate miter angle?
To calculate the proper miter angle for trim-work moldings, simply divide this angle reading by 2. In the example shown, the inside corner is 90.5 degrees—nearly square. The precise miter angle of your moldings should be 45.25 degrees.
How big of a board will a 12-inch miter saw cut?
Saws start to differ when you look at their blade diameter—commonly 10 inches or 12 inches. The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.
How deep can a miter saw cut?
Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights. This larger saw can cut a maximum thickness of 3 1/2 inches, enough to cut through four-by-fours.
Can you put a 10-inch blade on a 12-inch miter saw?
You can put your 10-inch blades on your 12-inch saw (assuming the arbor holes are the same size), but you cannot put 12-inch blades on a 10-inch saw. The 12-inch saw gives you greater versatility – with the larger blade, it’s the hefty workhorse, and with the smaller blade, it’s a master of precision.7 days ago.
How do you determine the angle of a cut?
The formula involves dividing 360 by the number of sides to calculate the corner angle. Then divide it by two to get the miter angle. If you’re making a five-sided project with all sides equal, you divide 360 by five to get 72 degrees. So each joint or corner forms a 72-degree angle.
Why are my miter cuts off?
There are few reasons your miter joint may not be lined up perfectly. Usually if you still can’t get the miter joint to close perfectly, it’s because you either cut one piece too long (or too short), or the blade itself was not perpindicular (90 degrees) from the base.
Do you cut baseboards upsidedown?
It is possible to cut the trim upside down in order to always use your favored hand, but this can often lead to cutting mistakes. The best method is to position the baseboard on the saw in the same direction as it will sit on the wall.
Can a miter saw cut a 6×6?
The geometry that makes it a wide, flat cutter works against it with a taller block. No saw could cut through a 4×4 at a 45-degree bevel angle, nor could any cross-cut a 6×6. The capacities in the specs (page 36) are based on the widest and thickest pieces that could be cut laying flat.
Can a 12 miter saw cut a 4×4?
The size of the 12” miter saw blade is such that it can easily cut through a 4×4. So, if you want to avoid the extra work, then a 12” saw is recommended.
Can a miter saw rip boards?
You can’t use a rip blade for on a miter saw because the design of a miter saw is such that wood lays across its blade path and not along it. For this reason, you will not use a miter saw for ripping. Miter saws are powerful tools because they transcend regular carpentry jobs like cutting two-by-fours.
What is the difference between a compound miter saw and a miter saw?
A miter saw is a specialized tool that lets you make cuts at a variety of angles. The saw has a blade mounted on a swing arm that pivots left or right to produce angled cuts. Compound miter saws feature blades that pivot left and right for angled cuts and tilt in a single direction for beveled cuts.
What can a 7 1/4 inch miter saw cut?
The included 7-1/4 inch TCT saw blade (tungsten carbide tipped blade) allows the miter saw to cut effortlessly through plastics, soft and hardwoods, sheet metal, aluminium, mild steel profiles and angles as well as copper pipe.
Is more teeth on a saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
Can I put a 7 blade on a 12 miter saw?
It’s ok to use a smaller blade in terms of it not damaging anything. You have already found out why it’s not such a great idea though. The size of the blade will be limited by the saws adjustments.
What does double bevel mean on a miter saw?
Dual-Bevel Compound Miter Saws. The blade angles of a dual bevel miter saw can adjust to both the left and right, as opposed to just one side, like the single bevel saw. Double bevel miter saws allow you to make precise and uniform cuts on both sides of your workpiece.
