Table of Contents
What can I use to cut 9 gauge wire?
What is the best tool to cut thick wire?
The Best Wire Cutter Our pick. Channellock E337CB Diagonal Cutting Plier. Strong cuts, comfy grips. Budget pick. Irwin Vise-Grip 2078306 6-Inch Diagonal Cutting Pliers. Quality at a bargain. Also great. Bahco 2101G-180 Ergo Cutting Pliers. Great features, not as strong. Also great. Klein 11054 Wire Stripper-Cutter.
What do you use to cut thick wires?
Best Wire Cutters When it comes to cutting wire, a standard pair of pliers will cut some types, but any professional will tell you there’s nothing quite like having the right tool for the job. It makes life easier and gets the work done faster. If you need to cut wire, you need wire cutters.
How do you cut a thick wire without a wire cutter?
Here are a few alternative methods that you can use to cut or break wiring on a job without using wire cutters. 1 – Bend it. If the wiring in question is on the thinner side and relatively pliable, you could try bending it. 2 – Hacksaw. 3 – Tin Snips. 4 – Reciprocating Saw. 5 – Angle Grinder.
How thick can wire cutters cut?
An 18-inch bolt cutter can cut metal up to 9/32 of an inch in diameter while a 24-inch bolt cutter can cut thicknesses up to 5/16 of an inch, depending on the material’s hardness.
What tool is used to cut wires?
Diagonal pliers (or wire cutters or diagonal cutting pliers or diagonal cutters or side cutters) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything).
Can you use pliers to cut wire?
Diagonal cutting pliers have a sharp, rounded tip, making them great for stripping and cutting wire. You can use these for nearly any type of wire. Diagonal cutting pliers are also widely used for removing pins and nails as well. If you want to cut a wire hanger, for example, this is a good option.
Are pliers the same as wire cutters?
Remember that wire strippers are best for removing the insulation from wire, while cutters are best for (you guessed it) cutting wire. Pliers help you reach, bend, grab, cut, hold and loop wire, and crimpers are the best tool to join two pieces of ductile material together.
Is it safe to cut wires?
A: Cable and phone wires don’t carry current, so it’s safe to remove them. However, it’s critical not to cut into a power line, as you know.
How do you cut wires without getting electrocuted?
If you want to cut a live wire, try you can use a pair of insulated pliers. Every electrician (amateur or pro) should have a good pair of lineman’s pliers. They can be used to strip wires and to tighten wire nuts, too.
Can you cut wire rope with bolt cutters?
Simply stated, bolt cutters are designed to cut bolts, while wire rope shears are designed to cut wire rope. The blades on a bolt cutter are not shear and will only smash the wire rope. Remember to use bolt cutters for bolts and solid material, and only use wire rope shears for wire rope and cable.
Can wire cutters cut through metal?
For the most basic application of cutting cables, you can use the wire cutters to cut copper, brass, aluminium, iron and steel wire. To protect you from being shocked by the electric cables you are working with; some wire cutters have insulated handles.
Can bolt cutters cut 1/2 inch rebar?
– Bolt Cutters The cutting force alone is enough to chop through smaller diameters of reinforced steel. This is a handy tool to have around when you need to quickly trim a piece of rebar down to size or if you have a number of sticks to tend to.
Are bolt cutters illegal?
Bolt cutters in general are not illegal to use, but some people associate them as being used to break into stuff. Chances are, if you just brought them from the store, and you still have any of the cardboard, plastic, etc.
What is the difference between side cutters and diagonal cutters?
One of the key differences is that diagonal cutters are often better suited to smaller, more delicate cutting tasks, whereas side cutters are ideally suited to larger-scale applications. While this isn’t always the case, it is useful to know as a general rule.
Which type of pliers is used to cut large gauge wire?
Lineman’s pliers Lineman’s pliers. This pair features, from top to bottom: gripping jaws, wire cutter, notch for pulling fish tape, crimper for different terminal connections, and rubber-coated handles. Other names Kleins (US/CAN), nines Classification hand tool Related pliers.
Can pliers cut metal?
There are a number of pliers that are designed with a cutting blade that will allow you to cut metal or wire, including the standard model pliers. The cutting edge of the pliers is normally located in the back of the jaws and has a serated or sharpened edge, allowing you to cut the metal without too much trouble.
What are needle nose pliers used for?
Needle-nose pliers are used to manipulate wire using the textured teeth. When working with this tool, the handles should be gripped tightly yet apply gentle force. They are not sturdy enough to cut large, hardened wires, and they are not to be used on live electrical wires.
What are the dos and don’ts in using hand tools pliers?
Avoiding abuse/misuse: Never expose these pliers to excessive heat. Don’t bend stiff wire with the tip of the pliers. Never rock the pliers side to side when cutting. Never pry with the nose of the pliers. Never attempt to cut a “HOT” wire.
How do you cut thick copper wire?
Blunt nosed linesmen pliers are traditionally used for cutting fence wire. A good heavy pair can cut copper wire up to 1/4 of an inch thick. Coax cable cutters are designed for cutting multipair wiring. With a curved blade, these cutters are good for insulated cables and small braided wire.
