Table of Contents
How to Reset and Clear Avaya 9608 IP Phone Settings Reboot the phone. Press the * button to program when it prompts as the phone is starting up. Press mute, then type in 27238 # (CRAFT). A menu will appear, scroll down to Clear and press Start. The display will show “Press Clear again to confirm”.
How do I clear my Avaya phone?
Reset the Avaya phone to factory settings. Press Menu button and navigate to the “Administration …” menu. Select and insert the Admin password (default is – 27238) Scroll the menu and select Clear. Press Clear again to confirm the action. The phone settings are cleared and the phone will restart.
How do I factory reset my Avaya phone?
Reset the Avaya phone to factory settings: Press Menu button and navigate to the “Administration …” menu. Select and insert the Admin password (default is – 27238) Scroll the menu and select Clear. Press Clear again to confirm the action. The phone settings are cleared and the phone will restart.
How do I factory reset my Avaya 1608?
Press the Mute key followed with 25327# Then clear all settings by pressing the # (POUND) on the dial then dial # (POUND) again and the phone will reboot to factory default.
How do I factory reset my Avaya 1140e?
RE: 1120e, 1140e reset to factory defaults.. From Wikipedia: The method to factory reset the phone is: **73639[MAC]## – where [MAC] is the MAC address of the phone using the 2 key for A/B/C and the 3 key for D/E/F. You can also think of it as **RENEW[MAC]##.
What is default password for Avaya phone?
Press the “Mute” button on the phone keypad, and enter the administrator password. The default password for Avaya 9600-series phones is “27238.” Press the “#” button immediately after you enter the password.
How do I fix my Avaya phone?
You may just need to unplug and plug your phone back in. Note that your phone plugs into your network jack, and your computer plugs into the back of your phone. If that still doesn’t work, you may need to do a VLAN reset. Go to Move/Reboot/Reset an Avaya 4600 Set or Move/Reboot/Reset an Avaya 9600 Set.
What is default password for Avaya 1608?
Resetting the Avaya 1608-I phone 3. x default PROCPSWD password is now “CRAFT” .. reseting the 1608 phone to factory default are as follows: “Mute” , “C”, “R”, “A”, “F”, “T”, “7”,”3″,”7″,”3″,”8″,”# ” you will then be prompted with the Reset Values?Oct 25, 2013.
What does waiting for LLDP mean?
If the “Waiting for LLDP” message appears for more than a few seconds, it generally indicates a problem with getting a value for the Call Server IP Address. This can occur due to incorrect settings in script files or in the way the network has been configured.
How do you unlock an Avaya phone?
To unlock the phone requires your login code if you have configured a login code. Press the Features soft key if shown. Use the up and down. Press the Select soft key or the OK button or the. Press the Select soft key or the OK button or the. The phone is now locked as indicated by the display.
How can I unlock my Avaya 1416 without password?
Unlocking the Phone Press the Unlock soft key. Enter your login code. • If you have forgotten the login code, your system administrator needs to reset it via the full system configuration. You can then unlock the phone using the new code. Press the Done soft key.
How do I reset my Avaya phone password?
Answer *Log into your account by entering your email address or user assigned phone number, followed by your password. Select Settings. Select User Details. Select Change Password, review and accept the Confirmation. Enter your current password & click Next. Select Change PIN tab.
How do I reset my Avaya 5610SW phone?
Reset the settings on Avaya 5610SW Press the * key when your phone is booting up to program it. Press the # key multiple times to skip through all the defaults until you get to the screen that says “Enter Command.” Press the HOLD key and then type RESET # Press the # key to confirm the reset.
What is the Avaya password?
The factory system administrator password is 1234. If the system administrator’s password is not known, Avaya can reset this password.
How do I log into my Avaya phone?
To log in to your telephone: To log in to your telephone: At the initial screen when it prompts you for your extension, enter your extension. Press Enter or OK. Enter your password. Press Enter or OK. To log out of your telephone: Press Avaya Menu. Select Log Out. Press Log Out or OK. Press Log Out again to confirm.
How do I log into my Avaya IP phone?
Logging into Avaya 9608 Press the button just underneath the Login text on the screen. Enter the 4 digit extension that you would like to be logged into. Press the button just underneath the Enter text on the screen.
How do I test my Avaya phone?
Self-Test Procedure To start the Avaya IP phone self-test procedures, press the following sequence: Hold 8 3 7 8 # (Hold T E S T #) The phone does the following: One of the following is finally displayed: To end the self-test, press #. The phone returns to normal operation.
Why does my Avaya phone Say No Ethernet?
Note that if the telephone is attached to a 30A switched hub, upon loss of Ethernet connectivity, the usual “No Ethernet” message is not displayed. CAUSE: The TFTP server IP address in the IP telephone’s memory is all zeroes. CAUSE: An invalid Avaya media server Registration extension has been entered.
How do I connect my Avaya phone to my computer?
How to Use the Avaya Softphone After setting up your Avaya softphone, you will be given a password for your extension. On the Place and receive calls using: menu, select This Computer. Select Yes to move your extension to your computer and use the softphone. The softphone keeps a log of your calls.
How do I unlock my Avaya IP Phone 1608?
Unlocking the Phone Press the Unlock soft key. Enter your login code. • If you have forgotten the login code, your system administrator needs to reset it via the full system configuration. You can then unlock the phone using the new code. Press the Done soft key.
How do I change the extension number on an Avaya phone 1608?
Press the HOLD button. Type in Logoff using the keypad followed by the pound sign (564633#) At the prompt press appropriate key *=no # = yes. If yes, system indicates “Logging off” Ext. = xxxx Enter ext # you want the phone to be changed to followed by the # sign.
What is Procpswd?
RE: 1608 asks for PROCPSWD at start-up this is to block the users for changing startup settings when the phone boots up or when it’s booted.
