Table of Contents
How do you use a horseshoe bail?
To use, twist off one side, slip the focal component through the bar and refasten the ball onto the screw. Bail has an anti-tarnish coating.
What wire is best for wire wrapping?
The best wire gauge for wrapping stones is the 20-gauge wire. It is neither too hard to bend nor too soft to lose its shape easily. What jewelry projects can I do with wire-wrapping?May 24, 2021.
What is needed for wire wrapping?
Basic Wire Wrapping Supplies Ruler. Wire Cutters. Permanent Marker. Jewelry Making Pliers: Round, bent nose and chain (use these to tuck in wire ends and shape your wire) Gauge (measures the inside of holes for beads and the width of the wire for gauging) Needle Nose Flat File (for filing the wire ends).
What is a pinch bail?
Pinch bails feature prongs on the end that will fit into the ends of a pendant’s stringing hole once the bail is pinched or crimped closed around it. Once the bail is in place on your pendant, you can easily slide it onto a necklace or other jewelry creation.
Are snap on bails secure?
Our Snap On Bails are a secure way to attach a Pendant or Charm to any necklace or bracelet project.
Can you use regular solder on silver?
Use silver solder like ordinary solder. Parts to be joined should fit together snugly; you may have to bend or file the parts slightly to get a good fit. Cleanliness is important, too. Wash parts to be joined, then sandpaper or steel wool the mating surfaces just enough to produce bright, bare metal.
Can I solder sterling silver with a soldering iron?
A soldering iron will not be suitable for soldering sterling silver. You will need to use a gas torch to achieve the correct temperature.
What kind of flux do you use with silver solder?
Stay-Silv® White Brazing Flux This is a white paste flux that’s used for 90% of silver brazing applications. White flux is useful for brazing copper, brass, steel, stainless steel, and nickel alloys.
Can you solder a split ring?
Jumprings that have been pulled apart to open, rather than twisted, are difficult to reclose snugly. The only way to permanently secure jumprings is to solder them together. Some jumprings are already soldered closed; others are solder filled and can be soldered closed with the use of a butane torch.
Do you have to pickle after soldering?
Pickle is a liquid compound used to remove oxidation and flux from newly soldered jewelry. It is what you put your pieces in to clean them after soldering. The metal should also be pickled before the soldering process to clean it. Pickle works best when it’s heated.
Can you solder jump rings with a soldering iron?
As long as the temperature of the soldering iron can reach the temperature of the solder, it can be used to solder the ring. Keep in mind that the metal also has to absorb enough heat to melt the solder.
How do you make a bail out of cardboard?
What wire will not tarnish?
Non-Tarnish Jewelry Wire is the perfect gold alternative. ParaWire takes 99% pure copper wire and coats it with an exclusive non tarnish coating and a lovely finish. This wire is great for jewelry making and other craft projects!.
What is 22 gauge wire used for?
Here at SparkFun, we typically use 22 AWG wire for prototyping and breadboarding. When using a breadboard or PCB, solid core is perfect because it fits nicely into the holes. For other prototyping/building involving soldering, the stranded core is #1, just be sure not to let too much current run through a single wire.
What is 18 gauge wire used for?
18-gauge are used for low-voltage lighting and lamp cords in 10 amps. 16-gauge are used for light-duty extension cords supporting 13 amps. 14-gauge are usedfor light fixtures, lamps, lighting circuits with 15 amps.
What tool is used to flatten wires?
Chain-Nose Pliers If you use the regular round-nose pliers (and not the multi-step looping pliers), you will need the chain nose ones to help to make great loops. Also, they’re great to flatten wire ends and wrap wire around the loop. You’ll find several other uses for it as well.
What is wire wrapping tool?
These wire wrap tools look like ordinary screw drivers and wire wrapping or unwrapping is achieved by twisting them by hand. Their bits and sleeves are usually part of the tools themselves, which means they are used for particular wire gauge sizes. They are generally useful for prototyping or repair work.
What is weaving wire?
Simply put, wire weaving is just looping thin wire around a heavy wire frame in a pattern.
What are pinch clasps used for?
Pinch bails are used for top-drilled beads to create a dangle for necklace or earrings. They are easy to use and functional for jewelry-making. Pinch bails have two prongs at the bottom which will insert into the hole of your top drilled bead.
What does bail mean in jewelry?
bail | ˈbāl. noun. The connector at the top of a pendant, which allows the pendant to hang from a chain or jump ring. Bails are a feature of specific jewelry types (primarily necklaces) that are intended to attach to a stone or pendant.
Can you solder to a coin?
Coin are made from various alloys and they can be a problem to solder quite often you will need to polish after soldering, normally it is a better practice to mount coins in a bezel.
Can pennies be soldered together?
First, get the two pennies to match up as close as possible in size. Coat the pennies with flux and setup (reference the video below). Then bust out your butane soldering iron to heat up the seam and use a paint brush technique to solder. Once soldered, file off the excess and wipe the ball clean.
What is the bail on a locket?
A bail (also spelled “bale”) is a component of certain types of jewelry, mostly necklaces, that is used to attach a pendant or stone. The bail is normally placed in the center of the necklace where the pendant hangs. Some bails are made so a pendant can be attached after the necklace production is completed.
How do you open a pendant clasp?
To open the clasp, you pinch the ends of the hook together and slide it out. Safety clasps come in many sizes and materials, but it’s common to find them in gold and sterling silver. This is one of the most secure options for fine jewelry, however it does have a couple of disadvantages.
How does a snap bail work?
It’s pretty easy to open. Just gently pull it open Then you’re going to put one of the little prongs in the little hole and then just pinch it close that’s why it’s called a pinch bail. You should be able to get it nice and tight without using a tool. And that’s how you use a pinch bail.
