Table of Contents
How to Cover a Popcorn Ceiling with Tongue-and-Groove Planks or Bead-Board Panels Mark Ceiling Joists. Use a stud finder to locate the ceiling joists. Install Insulation Panels (If Desired) Snap Chalk Lines. Cut and Install Furring Strips. Install Tongue-and-Groove Planks or Bead-board Panels. Add Trim Molding.
What is the cheapest way to cover popcorn ceilings?
For the dormer bedroom redesign, we decided that the easiest way to cover a popcorn ceiling would be with planks. And with the planks that we used, it was relatively cheap since they cost around $1 per square foot.
What can I use to cover a popcorn ceiling?
Popcorn ceilings should be covered with lighter materials such as paint, paneling, or planks. One option to consider is gypsum board paneling, a material that is very similar to drywall, but much lighter and easier for the ceiling to support.
How can I cover my popcorn ceiling without removing it?
Hide Popcorn Ceilings (5 Easy Ways To Cover Popcorn Ceilings) 1 | Plank The Ceiling. This post may contain affiliate links. 2 | Put Up Faux Tin Ceiling Tiles. 3 | Cover The Popcorn With Fabric. 4 | Install Barn Board and Faux Wood Beams. 5 | Paint A Pattern On The Ceiling. 6 Comments.
Can you put shiplap over popcorn ceilings?
Shiplap is less mess Scraping a popcorn ceiling is time-consuming and messy. Avoid pesky paint dust in your hair and install shiplap boards right over the bumpy patches–no scraping necessary. The shiplap ceilings in the kitchen brought in a new texture that complemented the tile and wood flooring.
Can I shiplap over popcorn ceiling?
Yes. You can use shiplap to conceal the popcorn ceiling. If your popcorn ceiling has imperfections and you don’t want to go through the expenses or mess of removing it, covering them with Shiplap planks will upgrade your room.
Can you put paneling over popcorn ceiling?
Since you have textured popcorn ceilings, the surface would be too uneven to just put paneling on top of it. You could go to the trouble of removing all the texture first, but a simpler method would be to put furring strips (made from 1×3 or 1×4 boards) on the ceiling, then attach the paneling to them.
Can I texture over popcorn ceiling?
The least expensive option for covering a popcorn ceiling is to seal it with paint or a heavier texture. You can also spray a heavier texture on the ceiling to cover and disguise the existing popcorn. As an alternative to spraying, you can trowel with ceiling with a heavy coat of drywall mud.
Is it OK to drywall over popcorn ceiling?
Covering the ceiling with drywall is a very inexpensive option, but it can be hard work to lift and attach 8-foot-long drywall panels overhead, unless you rent a special drywall lifting tool. Installing drywall also requires finishing skills that are challenging for many DIYers.
How do you install beadboard over a popcorn ceiling?
Instructions Measure your ceiling and determine how much beadboard you need. Determine where you would like trim lines to go to cover any gaps between boards. Cut your beadboard to size. Hold beadboard in place. Repeat until all the ceiling is covered. Add trim. Caulk all seams and nail holes. Sand if needed.
Can you just paint over popcorn ceiling?
Interior acrylic-latex paint is the best type of paint to use for popcorn ceilings. If you need to protect your ceiling from moisture, though, use eggshell, satin, or semi-gloss paint sheens. Popcorn texture ceilings require more paint than flat ceilings.
Does removing popcorn ceiling increase home value?
By removing popcorn ceilings, you are increasing your home value and ridding your home of the “outdated” look. One important note: If the popcorn was added before 1979, get it tested for asbestos.
How much does it cost to cover popcorn ceiling?
$1 – $2 per sq. ft. The average cost for popcorn ceiling removal is $1 – $2 per square foot with most homeowners spending around $2,700 for an 1,800 sqft home. The price can vary greatly by region (and even by zip code). Get free estimates from pros near you.
Can you put a wood ceiling over popcorn ceiling?
Popcorn ceilings were once in style, but today, they can make a home look a little outdated. Fortunately, it’s easy to do a renovation on the ceilings of a home using tongue and groove planks. To update a client’s home to look modern for an affordable price, the answer is in tongue and groove faux wood beams.
How do you cover a popcorn ceiling in a rental?
Drywall. Adding a layer of drywall to mask your popcorn ceiling is an easy way to get a smooth ceiling. However, if you decide to install it yourself and are working alone, you may need a drywall lift. You can rent one from your local home supply store, like Home Depot or Lowes.
How much does beadboard ceiling cost?
A wooden beadboard ceiling costs $5 to $6 per square foot for materials and labor.
Is beadboard tongue and groove?
Beadboard planks feature tongue and groove assembly, meaning one side of a plank has a tongue (protrusion) that runs the length of the plank, and the other side has a corresponding groove. When installed side-by-side this creates interlocking reinforcement that keeps the planks flat and even.
