Table of Contents
Can you connect a sink drain to a washing machine drain?
You can connect both a washing machine and a sink to the same drain. Examine the sewer pipe inlet located nearest the sink and washing machine. This is usually a free-standing pipe with an open end. If there is not a tee connection for the sink inlet, one will need to be installed.
How do you connect a washer drain hose to a utility sink?
Hook the drain hose over the lip of the standpipe or lip of the laundry sink. If connecting to a standpipe, don’t seal the hose to the pipe. Plumbing codes require that an air gap be left between the drain hose and standpipe to prevent siphoning water out of the washer. Don’t lay the hose on the floor.
How do I add a utility sink to my laundry room?
Instructions Assess Your Layout. Remove the Drywall. Drill Through the Studs. Tap Into the Water Supply Lines. Tap Into the Drain Line Standpipe. Attach the Copper Stub Outs. Assemble the Utility Tub. Add the Sink Faucet and Trap.
Can I drain a utility sink into washer standpipe?
A laundry sink (also called a laundry tray or tub) can be connected to a washing machine standpipe without a P-trap if the sink drain is within 30-inches of the standpipe. Also, the top of the standpipe must be above the flood rim of the sink and rise at least 30” above the trap weir of the standpipe.
Do you need a utility sink in a laundry room?
Sinks are some of the most important fixtures in a laundry room. This is because we do a lot of washing in the laundry room and hence we need the sinks for this purpose. Ordinary sinks will serve you well in your laundry room. But if you really want to make a laundry room work, install a utility sink.
Does washer drain need P-trap?
When hooking up a new washing machine, some people look for a convenient drain line and simply install a pipe that extends to the washer. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
Do you need a vent for washer drain?
All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home. distance between the washing machine and the vent.
Where does a utility sink drain?
Set the utility sink in place against the wall where the rough plumbing drain is installed; plumbers must connect drains to the main sewer line and typically leave a PVC or metal pipe extending from the wall, adjacent to the water supply lines.
What is a laundry sink bypass?
A sink with a bypass is one that has a hole in one or both back corners. This is for your washing machine drain hose. It passes through the whole and connects to PVC pipe under your sink. Most people prefer to feed the hose through the side of the cabinet, out of site if possible.
Can you use a kitchen sink in a laundry?
Yes, a kitchen or toilet sink can do everything that a laundry tub does but having one is going to make your life so much more convenient. For instance, instead of going up and down the stairs to wash your clothes, you can just do it in the laundry tub.
Does laundry sink add value?
For example, a recently refurbished laundry room with a sink and ample storage space will add more value than a laundry room that hasn’t been recently updated and only has enough space for a washer and dryer.
Where is the P-trap on a washing machine?
Drain Trap If you look under a sink, you’ll see a trap there. For a washing machine, the trap is typically located inside the wall behind the washer. All the water that your washer uses to clean clothes flows through the trap on its way to the sewer system.
Where is the drain trap on a washing machine?
Locate the drain trap door on the bottom portion of the front of the washer. You will see a small cutout along the bottom of the washer. Grasp the cutout and pull it toward you to pop it off.
Where does my washer drain to?
Washing machines drain into what is called a standpipe. A standpipe is a vertical piece of pipe with an elbow on the bottom. The elbow remains filled with water, preventing sewer gas from backing up into your laundry area.
How do I connect my washer to the sewer drain?
Your washing machine drain must be put into the sewer line correctly to prevent overflows. Locate the drain hose at the rear of your washing machine. Lift the drain hose and check that it reaches your sewer standpipe easily. Raise the open end of the drain hose, and put it into the open end of the sewer line standpipe.
