Table of Contents
Plug the Y-adapter into your computer’s audio output, then connect one leg of the Y-adapter to your computer speakers using a 3.5 mm cable like this one (most computer speakers include this cable), and connect the other leg of the Y-adapter to the subwoofer’s line inputs using a 3.5-mm–to–RCA cable like this one.
Can you connect subwoofer to speaker output?
You can connect a subwoofer to the high (speaker) level connections with speaker wires or a speaker connector. Check the specifications on your subwoofer beforehand. Using high (speaker) level connections will use the same audio signal for other speakers allowing for more precisely-timed bass.
What is the best way to connect a subwoofer?
The optimal connection is to use the RCA (Phono) “sub” or “woofer” line out found on home theater receivers and pre-amps. Some subwoofers offer High Level inputs (speaker wire connections), they are there for use with a receiver or pre-amp without a sub RCA connection.
Can you connect a subwoofer with speaker wire?
Although subwoofers are intended to be used with their own specifically designed wires, they are also able to operate using speaker wire.
How do I connect my subwoofer to my stereo?
Connect. If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver’s subwoofer output to the subwoofer’s line input (pictured above). If the subwoofer has an input labeled LFE, use that one.
Can you connect subwoofer without amp?
Subwoofers are designed to increase the bass frequencies, resulting in a deep, thumping sound. In most cases, they are paired with an amplifier to boost the sound. If you do not have the funds for both components, you can still hook up a subwoofer without an amplifier; it simply involves a little more know-how.
How do you hook up a subwoofer to rear speakers?
Some (many) powered subs have high level inputs, so you can just tap into the rear speaker wires. If your car has a factory sub, use its speaker wire instead. If it doesn’t have high level inputs, you can use a basic line out converter that ties into the speaker wires and turns them into a rca output.
Do subwoofers need special cables?
Regardless of what type of connection is available, be it RCA or direct wired, it is highly recommended to use shielded, heavy gauge cabling specifically designed for subwoofers. Such cables provide a cleaner, more noise-free audio signal.
Is a subwoofer cable just an RCA cable?
you can use a standard RCA cable, but a subwoofer cable is suggested as it has more shield in it and provides more clarity and resolution. a subwoofer cable comes with a standard RCA connector but is thicker than the standard RCA cable.
How do you hook up a subwoofer without subs?
an easy way to connect would be through a speaker wire. A subwoofer has either built-in wires or terminals for these connections. If your new receiver doesn’t have a speaker-level output, you can also get the speaker wire. and connect it to the LFE input, but that will only work for one subwoofer output.
Can I install a subwoofer with a stock radio?
…it takes amplified speaker level signals and converts them into high quality preamp signals that can be fed into an amplifier. So now you know – it’s definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good.
What is the difference between a subwoofer and an amplifier?
Powered subwoofers are self-contained units that have the speaker and amplifier in one enclosure. They are designed in such a way that the subwoofer has all the power it needs by keeping the amplifier/speaker configuration perfectly aligned.
How can I play speakers without an amp?
Type of source component If you don’t have an external amp, then consider connecting passive speakers to a powered source component. This means that the source component should have a built-in amplifier such as a powered mixer, powered subwoofer, or an AV receiver that has a built-in amp.
How do you connect a powered subwoofer to a passive speaker?
The first, most effortless way of joining the powered subwoofers with passive speakers is using a stereo RCA. Sometimes speakers don’t have the LFE connections. In that case, you have to use the RCA connection. RCA connection is the point of connecting any audio video device with your speakers.
What wire do you use for a subwoofer?
Jaeden, For wiring subwoofers, we recommend using wires of 12- to 16-gauge in size. There will be no audible difference between them – just less power loss with larger wire.
Can you connect LOC to rear speakers?
If you’re installing the LOC behind the radio, all the speaker wires are right there, including power and ground. However, if your car has rear deck speakers, you could install the LOC in the trunk and get the speaker inputs from the back deck speakers. Then just run your remote wire and RCA’s from the dash to the amp.
Can I just add a subwoofer to my car?
And it’s actually quite easy, thanks to simple subwoofer upgrades from the aftermarket that can be added to almost any existing car stereo system. Adding a subwoofer to your audio system generally means also having to purchase and install an amplifier to power it.
