Table of Contents
Connect. If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver’s subwoofer output to the subwoofer’s line input (pictured above). If the subwoofer has an input labeled LFE, use that one.
Can you connect a subwoofer to a stereo amplifier?
While a powered subwoofer (active subwoofer) does not need to be connected to an amplifier since its amp is built-in, you can connect a powered sub to an amp for data transmission only. To do this, connect the two with RCA cables and plug the powered sub into the wall for its power source.
Where do I plug my subwoofer into my receiver?
The preferred method of connecting a subwoofer is through the subwoofer output (labeled SUB OUT or SUBWOOFER) of a receiver using an LFE (Low-Frequency Effects) cable. Almost all home theater receivers and processors and some stereo receivers have this type of subwoofer output.
How do I connect my subwoofer to my receiver without LFE?
If your receiver doesn’t have a preamp output, you can treat the subwoofer like another speaker and use speaker wire to connect it to the receiver’s speaker terminals designated for the front left and right speakers. You would then connect the front left and right speakers to the subwoofer’s speaker-level terminals.
Can you connect subwoofer to speaker output?
You can connect a subwoofer to the high (speaker) level connections with speaker wires or a speaker connector. Check the specifications on your subwoofer beforehand. Using high (speaker) level connections will use the same audio signal for other speakers allowing for more precisely-timed bass.
How do I connect my subwoofer to left and right input?
To connect a subwoofer to its receiver, you can use an LFE input cable or an RCA line-in cable (used for left and right input options). Assuming your subwoofer has the option to use an LFE input, this will be your best choice. But, if not, then an RCA input option will work.
Is a subwoofer cable just an RCA cable?
you can use a standard RCA cable, but a subwoofer cable is suggested as it has more shield in it and provides more clarity and resolution. a subwoofer cable comes with a standard RCA connector but is thicker than the standard RCA cable.
How do you hook up a subwoofer without an amp?
Hooking Up a Subwoofer Without an Amplifier Start the installation process by removing your speaker from the mounting dock, giving access to its wiring. Mount your subwoofer in your preferred location. Next, reroute the stereo and power supply cables to the subwoofer and connect them.
How do you hook up a subwoofer to a stereo receiver?
If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver’s subwoofer output to the subwoofer’s line input (pictured above). If the subwoofer has an input labeled LFE, use that one.
Can you connect a subwoofer with speaker wire?
Although subwoofers are intended to be used with their own specifically designed wires, they are also able to operate using speaker wire.
How do you hook up a powered subwoofer to an older receiver?
A subwoofer with speaker-level inputs is especially easy to connect to your older amplifier or receiver! To do so, just connect to the speaker outputs on the source unit using speaker wire and then to the matching inputs on the subwoofer. You can even power speakers from the amp or receiver at the same time.
Can you wire a subwoofer to the both right and left channels?
Can you wire a subwoofer to both right and left channels? – Quora. Yes. You can use the speaker level inputs and tap the red right and white left wire. You can also use the RCA sub out or pre amp sockets and connect both red and white to the sub.
Does a sub need left and right inputs?
Essentially the left and right channels are combined into one cable to allow for both channels to be evenly dispersed. An LFE cable can deliver effective and high-quality audio signals. Keeping things simple… Your receiver does the job of separating and directing the low-frequency signals to the subwoofer.
Should I use both inputs on subwoofer?
Dual input allows the subwoofer an extra sensitivity adjustment. Normally, it would be enough to use a mono LFE subwoofer signal from its processor. By using both inputs with the same mono signal doubles the subwoofer sensitivity. This means that there is now only half the signal strength to drive it to full output.
What cables do you need for a subwoofer?
Regardless of what type of connection is available, be it RCA or direct wired, it is highly recommended to use shielded, heavy gauge cabling specifically designed for subwoofers. Such cables provide a cleaner, more noise-free audio signal. The image below shows two subwoofer outputs.
Can I use a single RCA cable for subwoofer?
Any single, standard RCA or subwoofer cable should do just fine. The other end of the cable will be plugged into the L/LFE (white) RCA jack on the back of your sub. Any cable designed for subwoofer use should be just fine.
Do subwoofers use coaxial cable?
Subwoofer cables are a type of audio cable that can greatly increase sound quality. They are used for the purpose of connecting any media device that supports coaxial (S/PDIF) audio interface. Subwoofer cables contain RCA connectors on both ends. Subwoofer cables help make sound feel real.
How do I connect my subwoofer to my Sony receiver?
IMPORTANT: Connecting two subwoofers to a Sony® stereo receiver is not supported unless the stereo receiver has a second subwoofer output jack. Connect the first subwoofer to one of the subwoofer outputs on the stereo receiver. Connect the second subwoofer to the other subwoofer output on the stereo receiver.
