Table of Contents
8 Genius Ways to Hide Every Wire in Your Home Hook Cords to the Back of Your Furniture. Corral Them Behind the Couch. Hide TV Wires in Plain Sight. Run TV Wires Behind the Wall. Tuck Cord Chaos Into Tubing. Slip Them Into a Drawer. Snake Them Through Baseboard Accessories. Stash Wires and Routers In “Books”.
What do you hide wires with?
You can be creative with ways to hide the wires of your home electrical devices: Bind power cords with tubing or cable ties. Place a decorative basket next to a table and insert the bound cords into the basket and out of sight. Use dark-colored plastic zip ties to attach power cords to furniture legs.
What do you do with cords when you wall mount a TV?
If the cords dangling from your wall-mounted TV are distracting you from what’s on screen, conceal them with cord covers like this D-Line Cord Cover available at Amazon—a favorite in our researched guide to the best cable management for the home. Plastic tracks like these mount directly to the wall on top of wires.
How do you cover exposed wires?
Electrical tape is the simplest method of making electric wires safe. You also use tape on capped live electric wires as an extra precaution. Tapes can be used on loose live wires that do not fit the cap. You can simply use tape over the live wire to fit into the cap.
How do you hide wires to a wall DIY?
DIY Tricks to Hide TV Wires Without Cutting the Wall Get a Stylish Entertainment Unit. An entertainment unit could be just the answer you’re looking for. Create Panelling on the Wall Just Behind the TV. Wall Cladding. TV on a Stand. Paint the Raceway. Panel Just Behind the TV. A Green Solution. Create Art with Wires.
How do you cover exposed wires without electrical tape?
Substitutes for electrical tape are as follows duct tape, wire nuts, friction tape. Others like heat shrink tubing and dielectric spray are also excellent substitutes for electrical tape. Many people may not have a specific item when needed, and they may have another item handy around the house or garage.
How do I arrange the cords behind my TV?
To avoid knots of cables behind your TV, use cable ties. Plastic zip ties that cinch closed or hook and loop fastener strips wrap around bundles of cables to prevent them from becoming loose or otherwise getting tangled. If your home theater components are close together, use these to keep them organized.
How do you hide unsightly wall plugs?
For The Renovators: Prevention Tips And Tricks Install outlets strategically so furniture can cover them. Match outlets to the color of your kitchen island. Consider installing floor outlets. Place outlets where TVs will be mounted. Disguise cords by running them underneath a rug.
How do you hide electrical cords in the middle of the room?
For cords that are still exposed, be sure you weight them down with a rubber cord cover (you can hide that further by applying contact paper, like wood-grain). Use baseboard clips or wall clips to affix cords to the wall or floor. It will help hide cords further and help eliminate tripping hazards.
Is it OK to run TV power cord behind wall?
A power outlet extension with building-safe wire: Under no circumstances should you be running the power cables to your TV behind the wall. These aren’t up to code and they’re fire hazards to boot. The only power cable you should run behind your wall are ones that come in a code-friendly kit.
Is it safe to put electrical tape over exposed wires?
Electrical tape, typically black in color, should be used on exposed electrical wires because of its low conductivity and durability to wear and tear over time. Electrical tape should not be used if the insulation between the positive and neutral wire is compromised.
Can you leave electrical wires exposed?
Yes. This is not only safe but best practice. Tuck the capped wires completely into the junction boxes to avoid accidentally snagging on passing ladders, wallboard, etc. If the room continues in general use then install blank cover plates.
Is it safe to cap off live wires?
You don’t have to concern yourself about the bare copper grounding wire but you should always cap off every neutral as well as hot wire. Capping off electrical wires is necessary to safely remove a device from a circuit.
What can I use instead of insulating tape?
The most popular alternatives to electrical tape are wire nuts and heat-shrink tubing. The internal threading on wire nuts is designed to be twisted on to the ends of stripped wires.
Can you use masking tape instead of electrical tape?
You cannot use masking tape instead of electrical tape since it is not rated to do this type of job. Not only is masking tape potentially flammable, but you could also even receive a shock through it. Only UL listed electrical tape should be used to connect anything that conducts electricity.
Can you use packing tape instead of electrical tape?
No! The tape is not current. Good electrical tape is designed to be stable in the environment it is in, such as 0C to 50C. If you use regular tape, it doesn’t have a rating.
How do you make cords look neat?
Power strips and surge protectors are must-have items for keeping cords tidy. Consider mounting them using double-sided mounting tape or Velcro strips to the underside of a desk or back of a hutch to keep them neatly out of view.
How do you organize wall wires?
There’s no need to drill a hole in your wall to hide the TV cords. Just wrap the cords together with zip ties, then corral them in an off-white piece of cloth (or a color that matches your walls) and voila — it blends in perfectly! Get the tutorial at In My Own Style.
How do you cover up old outlets?
As long as there are no wires inside the box, you can cover it with drywall. If the box is still acting as a junction box, however, and wires are joined inside it, the electrical code mandates a removable cover. Covers come in plastic or metal, and you attach them with machine screws.
