Table of Contents
Can you completely empty a pool?
Never completely drain a fiberglass or in-ground vinyl liner pool; doing so can damage the integrity of the pool surface or liner in the form of bowing or cracking. The best practice is to partially drain these types of pools. Always complete partial drains by 1/3 of the water at a time.
How do you completely drain an above ground pool?
All you need is a medium-size water or vacuum pump. Unroll the pump’s intake hose so that it reaches the center of the pool (or as close to it as possible), and submerge it in the pool. Place the outlet hose so the exiting water doesn’t flood the area, but drains off away from the pool. Dry your hands thoroughly.
Can you drain a pool yourself?
If you decide to drain this pool yourself, you will first need to rent a sump pump that can be submerged under water. After renting the proper sump pump, connect it to the sewer access point and submerge the other end in the pool. Plug the pump into an outlet and let it go to work.
Does draining a pool damage it?
First, if the draining is done at the wrong time or under the wrong conditions, you can actually risk damaging your pool structure and liner. All the water from your pool needs to go somewhere when it’s drained, and that usually means the ground. For fiberglass pools, the risks of damage are even greater.
Where do I get pool water discharged?
To Drain Your Pool or Spa Locate the sewer cleanout on your property or an indoor drain such as a sink or bathtub. Using a hose, connect a siphon or sump pump that pumps 20 gallons or less per minute to the cleanout or indoor drain. Pump the water from the pool or spa to the cleanout or indoor drain.
Can you drain a pool and leave it empty?
An empty swimming pool can pop, or float out of the ground. This is due to possible hydrostatic pressure from unknown underground water. Do not drain your pool and leave empty without taking measures to prevent such popping.
How long can an inground pool sit empty?
If ground water is not a problem a pool can be left empty for weeks or even months as long the hydrostatic relief in the bottom of the pool is open and functioning. If the time frame of the pool being empty gets into freezing weather there is real risk of freeze-thaw damage to surface of the pool.
How long does it take to drain a pool with a garden hose?
Draining a pool can take up to 14 hours, depending on the size, so be sure to drain it on a day when you have sufficient free time. You need to be home to check on the pool, the hoses, and the pump frequently.
How do I get water out of my pool without a pump?
How to Empty a Pool Without a Pump Place one end of a water hose in the pool. Take the other end of the hose to where you want the water to drain. Siphon the water out of the pool by placing your mouth on the end of the hose and sucking repeatedly until water comes out.
How much does it cost to drain a pool?
The average cost to drain and clean a pool is between $500 and $700.
How often should you drain a swimming pool?
Pool industry experts recommend you drain your pool and refill it every five to seven years. No two pools are alike, so there is no set number at which you must drain your pool.
Is it OK to leave a concrete pool empty?
Why You Should Not Leave Your Pool Empty Hydrostatic pressure (pressure from stationary water in the ground). That’s the quick answer. But if you empty the pool, even concrete pools, you risk serious issues, including damaging the vinyl liner, cracking concrete sides, and the pool literally popping out of the ground.
What do you do with an unused pool?
50 Alternative Uses for Your Empty Pool Skate park. Bulldog skate park. Roller rink. Racquetball court. Handball court. Volleyball “equalizer” court (tall folk in the deep end, short folk in the shallow end) Dog park. Cat corral.
How long does it take for a pool to Dechlorinate?
Chlorine naturally dissipates into the air and out of your pool water when exposed to sunlight. The process usually takes less than a week. If you plan on using pool water to irrigate your trees, don’t add any more chlorine to your pool. After four or five days, test the water.
How do I Dechlorinate my pool water?
Simply stop adding the chlorine tablets that you regularly put in your outdoor swimming pool. Exposure to sunlight will gradually dechlorinate the water. You’ll need to leave the pool uncovered for two weeks. Use a bucket to dechlorinate a small amount of water.
How do you Dechlorinate a pool before draining?
So What Do You Do With Pool Water? Dechlorinate pool water by letting it sit for several days without adding more chlorine. Your water’s pH level should be between 6.5 and 8.5 before draining. If you are in a hurry to drain your pool, you can add sodium thiosulphate to break down the chlorine faster.
