Table of Contents
What can I use as a TV stand?
Here are 7 suggestions for ‘unique’ media stands. A dresser: Depending on how much space you have in your living room this is a fantastic option for a few reasons. A chest: Depending again on the height, having a chest with or without detail is a unique look. A console table: A fireplace: A bench: TV Easel: Bookcase:.
Can I build my own TV stand?
Modern Appeal. To build this contemporary, whimsical, and functional DIY TV stand, you need nothing more than about 40 bucks and the willingness to put in a little elbow grease. Simply cut some furniture-grade plywood into narrow strips, stack them, and add some ready-made hairpin legs—or even concrete blocks—and voilà.
Can I paint TV stand?
Paint your TV stand and the doors! Shake and stir your paint before using it. Then apply the paint in the same direction as the wood grain. It was awesome to use sawhorses for this piece so we weren’t crouching over painting, but obviously that’s up to you! Let the paint dry overnight, then paint a second coat.
How do you paint a TV frame?
Remove the frame from the television if possible and move to a well-ventilated area. If your frame is wood or metal, then gently sand the surface. Brush away any paint dust. Paint in 6-inch sections of frame. Use spray paint on plastic frames.
What can I do with a TV without a stand?
If you want to use a corner of your house for your TV, a corner shelf is a perfect way to set it up without a stand. It takes up less space and can be easily made using only a few parts and tools. It serves as a floating mount for your TV.
Can a dresser be used as a TV stand?
They are so many reasons to love dresser used as TV stands. In most cases, vintage dressers just need a little love, either cleaned up, or painted along with new hardware [if needed] can give an old dresser an entirely new look. Another reason to love dressers used as TV stands is all the storage they can provide.
How do you paint over fake wood?
The 2 Best Ways to Paint Laminate Furniture ~ Method #1 Clean the Surface. This dresser was dusty so all that was needed to clean it was a soft cloth dampened with warm water. Lightly Sand the Entire Piece. Yes, SAND! Prime. I used B.I.N shellac-based primer. Paint. Protect with a Sealer/Topcoat.
What paint can I use on laminate furniture?
Latex paint is recommended for laminate surface painting projects because of its durability and smooth finish. Try ProClassic Interior Acrylic Latex Enamel for lighter colors, and All Surface Latex Enamel Base for deeper hues.
How do you refurbish a wood TV stand?
All you need to do is follow these simple steps: Clean the cabinet. Remove all grime, dust or dirt from the corners and seams. Inspect the TV cabinet thoroughly. Remove the old varnish or paint. Seal the wood and then stain it. Apply a finish.
How do you spray paint plastic frames?
Gently sand the plastic with a fine-grit sanding block to scuff the surface slightly, which helps paint or primer adhere better. Wipe the frame down with a soft cloth to remove plastic particles. Tape off any areas you don’t wish to paint to protect the surfaces while priming or painting.
Can you stain over already stained wood?
1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.
Can you stain over varnished wood without sanding?
It is possible to apply stain over varnish. Since the purpose of a stain is to stain – or penetrate – the wood surface, once varnish has been applied, you can’t expect the same results you would get from applying stain to unvarnished wood.
Can you Restain a table without sanding?
You absolutely do not need to sand the finish off the table, just lightly sand enough to rough up the existing finish to give the Polyshades something to grip. No need to break a sweat for this step.
How long should stain sit before wiping off?
Wipe the stain off immediately if you’d like a lighter tone. But for a deeper tone, leave the stain on the wood for 5 to 10 minutes before wiping it off. Be sure to wipe off all the excess stain going in the direction of the grain of the wood.
How many coats of stain should you apply?
2 coats. To deepen the color, apply a third coat. Optional, for additional luster or sheen a clear protective finish can be applied. Recommended finishes include Minwax® Fast-Drying Polyurethane or Minwax® Wipe-On Poly.
What is the easiest stain to use?
Oil-Based Stains Oil-based interior stain is what most people think of when it comes to wood stain. They are readily available and the easiest to use. They usually have a linseed oil binder that allows plenty of time to remove the excess before the stain dries.
Is it better to stain wood with a brush or rag?
Using a lint free rag is the best way to apply wood stain because it is great for controlling the amount of stain that is applied and for removing any excess stain. Also, the rag leaves a beautiful, even, and brush stroke free finish. It also can easily be thrown out once finished.
Is it better to stain or paint wood furniture?
Furniture pieces with mild to moderate flaws that you can sand out are great to stain—the right stain can cover the imperfections and make the item look new again. For furniture with severe flaws that you cannot easily fix by sanding, paint will better cover these issues and make the piece look new again.
