Table of Contents
Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. Don’t forget outdoor faucets and hydrants.
How much bleach should I put in my well?
4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach – (4 quarts in a gallon). Do not use excessive amounts of bleach – more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well.
How long should you wait to use water after you chlorinate a well?
Once the chlorinated water has reached all the appliances, fixtures and faucets, let the chlorinated water stand in the well and plumbing system for 8 hours. WHILE THE CHLORINE IS IN THE SYSTEM DO NOT DRINK THE WATER. CONTACT WITH THE WATER MAY CAUSE SKIN, EYE AND NOSE IRRITATION.
Is it safe to put bleach in your well?
You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.
How do I disinfect my well?
Rinse the inside of the well casing with a garden hose or bucket for 5-10 minutes. Open all faucets inside the home and run the water until you notice a strong odor of chlorine (bleach) at each faucet. Turn off all faucets and allow the solution to remain in the well and plumbing for at least 12 hours.
What happens if you put too much bleach in well?
According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.
Should I shock my well?
Wells should be shock chlorinated when a well water sample result shows that there is bacteria in the water. Any time a well is opened for repair it must be disinfected. Newly-built wells should also be shock chlorinated following construction.
Can I shower after shocking my well?
Do not shower for at least 24 hours after shocking your well. Waiting for one or two days more, if possible, is much better. Chlorine levels in the well water will go down only after freshwater dilutes and replaces chlorinated water. This process can take 1-2 days.
Why does my well water turn brown when I add bleach?
The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.
How long does it take to flush bleach from a well?
Monitor the process, it can take 30 minutes to 24 hours or more to flush all of the bleach solution from the well. Use chlorine test papers to verify that the water coming from the outside faucet or yard hydrant is clear of any bleach solution. Flush the chlorinated water from water heaters.
Can you use Clorox to shock a well?
Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.
Can I put a chlorine tablet in my well?
the well has been flooded or exposed to bacterial contamination in another manner, such as a crack in the well cap. Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well.
What is a natural way to clean well water?
Liquid chlorine in the form of household bleach and food grade white vinegar can be used to disinfect your well. When chlorine is added to water the pH level will rise. Food grade white vinegar is used to lower the water’s pH level so the chlorine will work effectively.
How much does it cost to have your well Shocked?
You can hire a company that services wells to do the chlorinating. The cost ranges from $80 – $200. You can also perform the task yourself. It simply consists of pouring diluted chlorine into the water, letting it sit for a while, and then flushing the chlorine out of the system.
How do you shock a buried well?
To shock chlorinate, you add a concentrated chlorine solution to the water in the well casing (material that supports the sides of the well). Some of this water will move outside the well and into the aquifer. Then you flush the chlorinated water through the system and let it sit for a certain amount of time.
How often should you clean your well?
9. As a routine maintenance practice, clean your well at least once a year. If you have an iron or sulfur bacteria problem, clean more often.
Why is my water brown after shocking well?
Practically always after you shock-chlorinate your well the water turns brown. The chlorine used to shock the well reacts with iron, manganese and reducing bacteria in the well and it is pulled into the water chlorine solution. That is the brown you see. Rust or breakdown of the metals in in the well or house.
