Table of Contents
Gently scrub your board with a sponge and hot, soapy water (we recommend using a mild unscented dish soap, such as Seventh Generation Free & Clear Dish Liquid). It’s important to wash both sides of the board (even if you chopped on only one side) to prevent it from drying unevenly, which could cause the board to warp.
How do you disinfect a cutting board?
To sanitize a cutting board, either plastic or wood, use a dilute chlorine bleach solution (1 tablespoon per gallon of cool water). Be sure to rinse it well with warm water.
How do you disinfect a wooden cutting board?
Mix one part white distilled vinegar to 4 parts water and either spray it onto the wooden surface directly and leave it for five minutes, or, soak your chopping board for five minutes. Rinse down and dry completely.
How do you clean plastic cutting boards?
Do remove food stains on plastic chopping boards by rubbing fresh or bottled lemon juice on them and leaving overnight. If you prefer to use vinegar as a natural solution, mix four parts water with one part white vinegar. Soak the board for a few minutes. Rinse and dry.
How do you deep clean a wooden cutting board?
Soak a clean, white cloth with either pure white vinegar or three percent hydrogen peroxide. Wipe down the board thoroughly and let sit for a few minutes. If there are stains or odors, sprinkle kosher salt or baking soda on to the board, and rub with the cut side of a lemon to clean and deodorize.
Is it safe to bleach cutting boards?
Plastic cutting boards work great with bleach. Bleach will not react with the plastic in any way, making it a good option. Bleach will safely sanitize the board and can even remove surface stains, making your boards look better as well.
What oil is best for cutting boards?
What Type of Oils are Safe to Use on Your Cutting Board Mineral Oil. Mineral oil (sometimes called liquid paraffin) is a non-toxic, non-drying product derived from petroleum that is colorless, odorless, and flavorless. Beeswax. Coconut Oil (Refractionated) Carnauba. Baking Soda. Lemon Juice. Tung Oil. Linseed Oil.
Can you soak a wooden cutting board?
Simply apply a good amount of mineral oil to the entire surface of the board and let it soak in overnight. This will make the board much more moisture resistant, while keeping the wood lubricated enough to avoid drying out and warping.
Can you cut raw chicken on a wood cutting board?
According to the experts, chopping raw meat on a wooden cutting board is perfectly fine, but it is important to watch out for liquids. In the case of raw meat, there could be liquids or blood that come from the meat when cut, which if left to pool for long periods can be absorbed into the wood.
Can you clean cutting boards with vinegar?
If your board has any sour or mold-like smell, you can also put a cup of baking powder onto the board and pour a cup of white vinegar over the board. The combination of these two ingredients will create an oxidization process that will remove stains and (hopefully) any lingering smells left in your cutting board.
Can you use bleach on plastic cutting boards?
Many people use bleach to clean plastic cutting boards. They choose bleach because it is good at removing stains and kills germs. Unfortunately, cleaning with bleach can damage your health and corrode surfaces.
How do you remove black stains from a cutting board?
Just sprinkle baking soda on the surface of the cutting board, then work it into the surface stains with a lemon (which also makes the board smell amazing, by the way) or a gentle sponge or wash cloth. Rinse the board and dry it with a towel.
Can I use Clorox wipes on wood cutting boards?
Wood cutting board: When cleaning wooden cutting boards, use approximately 2 tablespoons of Clorox® Regular-Bleach per gallon of water to create a sanitizing solution. Rinse with a solution of 2 teaspoons of Clorox® Regular-Bleach per gallon of water. Do not rinse or soak overnight.
Is coconut oil good for cutting boards?
You should not use any type of cooking oil on your board, such as olive oil, vegetable oil, or regular coconut oil, because they will go rancid. Also keep in mind that excess moisture is bad for wood. Never soak your cutting board or let it sit in water for extended periods.
How often should you oil your cutting board?
We recommended you oil your cutting board every month or when dry to the touch. Board cream should be applied at the same time as oiling.
How many coats of oil do you put on a cutting board?
On new or raw wood surfaces, like cutting boards and butcher blocks, make sure to “season” them first with Cutting Board Oil. To properly “season” new wood surfaces, apply at least 2 coats and let each coat soak in for at least an hour. For surfaces thicker than 1.5-inches apply 3-4 coats.
How do you clean a wooden cutting board with lemon and salt?
Cleaning a Wood Cutting Board With Lemon and Salt Take a lemon and cut it in half. Scrub the salt down each side of the cutting board using the lemon with the fleshy side down. Let the salt and lemon solution sit for approximately five minutes. Finally, clean off the board with a sponge, rinse, and dry.
Is it OK to put cutting board in dishwasher?
Best dishwasher-safe cutting boards “Most plastic, acrylic, or composite cutting boards are dishwasher-safe, which is a perfect way to sanitize your raw meat boards.” He likes these durable, BPA-free boards, which are designed to stay in place while you’re chopping.
