Table of Contents
How do you clean hardwood floors after construction?
Make a cleaning solution by adding two cups of white vinegar to a gallon of warm water. Sponge mop a small area with as little water as possible and immediately dry completely with a towel. It may take several applications to get all the dust up and remove any white residue or dullness from wooden or tiled surfaces.
How do you clean floors after construction?
Clean-up steps after renovating: Sweep and vacuum all surfaces, including ceilings and walls. Sweep, mop, and disinfect floors. Vacuum all upholstery. Wipe down doors, knobs, baseboards, moldings, and hardware. Thorough wipe-down and sanitization of bathrooms and kitchens (including appliances, cabinets, and counters).
What is the best thing to use to clean wood floors?
You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. Be sure to follow the manufacturer’s instructions. You can also make your own cleaner by mixing one part vinegar to 10 parts warm water. Add a few drops of liquid Castile soap.
How do I get rid of dust in my house after construction?
Post-Construction Cleaning Checklist Vacuum Carpets & Upholstery. It’s all too easy for dust and dirt particles to embed themselves in curtains, upholstered furniture and carpeted floors. Wipe Down Hard Surfaces. Clean surfaces from the top down. Clean Air Vents & Replace Filters. Don’t Forget About the Little Things.
How do you get rid of dust in the air after construction?
There are several ways to remove post-construction dust from the air to help everyone breathe a little easier. Open the windows. Set an air cleaner into the space. Vacuum the floors at least once a week. Avoid sweeping or dusting with a feather duster.
How do you clean floors after refinishing?
Post Project Clean-up ???? After refinishing hardwood floors, be prepared to thoroughly vacuum and wipe down every last surface. This includes every square inch of your walls. I highly recommend a vacuum with a new filter, as well as these microfiber cloths.
What is included in a builders clean?
When you purchase a builder’s clean, your bathroom will receive the following treatments: All debris will be removed and disposed of. Deep cleans of all bathtubs. Deep clean of all showers. Deep clean of all sinks. Deep clean of all toilets, including disinfectant in the bowl and seats wiped. Deep clean of the bathroom floor.
Will Swiffer ruin hardwood floors?
You can safely use Swiffer products on hardwood floors. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won’t damage them.
Does drywall dust ruin hardwood floors?
Dust can damage furniture and rugs and ruin the finish on a hardwood floor. Although the dirtiest work takes place during demolition and drywall sanding, every phase of construction produces dust.
Is Murphy’s oil soap good for hardwood floors?
THOROUGHLY SATISFYING For a deep, conventional cleaning, consider using a concentrated product like Murphy® Original Formula. Whether you’re cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
Can I use Pine Sol on hardwood floors?
We like using Pine-Sol® Original Pine Multi-Surface Cleaner on hardwood floors. You can also use Pine-Sol® Original Squirt ‘N Mop®. It’s safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle.
Is it safe to use vinegar to clean hardwood floors?
Just don’t use vinegar and water to clean hardwood floors. The finish is the protective layer of your hardwood floors. Since vinegar is an acid, it will actually break down the finish on the surface of your floor, and over time it will reduce the shine and leave a dull appearance.
Is dish soap safe for wood floors?
Over an extended period, vinegar may accelerate the dulling of your hardwoods. An alternative natural cleaning solution is warm water and dish soap (1/4 cup of dish washing liquid for a bucket of warm water). To ensure the area is thoroughly clean, rinse with warm water and dry.
Is construction dust harmful?
Construction dust is not just a nuisance; it can seriously damage your health and some types can eventually even kill. Regularly breathing these dusts over a long time can therefore cause life-changing lung diseases.
How long does it take for construction dust to settle?
Particles of 15µm–100µm in diameter (inhalable) can settle within 1 minute; in larger rooms, air volume will extend the time needed for settling. Particles less than 10µm in diameter (thoracic) will take about 3 minutes to settle. Particles at 5µm in diameter (respirable) will settle in about 8 minutes.
How do you remove construction dust from walls?
Wipe walls with a soft damp towel to collect dust and to wipe it away. For hard to reach areas wrap the towel around the bottom of your broom and secure it with tape. If your walls were painted recently, avoid using anything moist as it may damage the paint. Let the walls dry for about 30 days before cleaning.
How do you charge for post construction clean up?
Construction cleanup costs $469 on average with a typical range between $275 and $694 for residential services. For large projects or those that include multiple visits, you might pay up to $3,000. You’ll spend anywhere from $0.10 to $0.50 per square foot or $30 to $50 per hour for per site cleanup pass.
