Table of Contents
How to Clean Vinyl Records Wipe gently. Remove all dust and static using a microfiber cloth, using very little pressure to avoid driving any particles further into the grooves in the vinyl. Rinse. Apply Simple Green solution. Damp-wipe clean. Dry. Spin and store properly.
What household items can you use to clean vinyl records?
Here’s what you’ll need: Warm water. Some people say you should use hot water, but there’s no real benefit to that. Dish soap (or record cleaning solution) Dish soap is the cheapest option, but it will leave a bit of residue on your records. Carbon Fiber Brush. Soft, Lint-Free Cloth.
How do you clean vinyl records yourself?
Mix 1/4 of 96-99% isopropyl alcohol, 3/4 distilled water, and one or two drops of rinse agent. The best way to do this is to add these ingredients to a spray bottle and shake well. Place the record on a microfiber cloth. Spray the solution on the record by making sure none of it gets on the label.
Is it OK to clean vinyl records with alcohol?
Wash The Record In particular, we recommend avoiding any that contain isopropyl alcohol. While it will clean the muck off your record, many people report that over time it’ll also damage the protective coating on your vinyl. If you are going to use a solution with isopropyl alcohol – use is sparingly.
Can you use water to clean vinyl records?
Ideally, you want to use distilled water to avoid impurities from your tap getting into the grooves of the record. Try to avoid the label when cleaning with water. The brush helps remove dirt and impurities from the grooves of the record when you move it in a concentric motion, or along the same axis as the record.
Can wd40 clean vinyl records?
WD-40 is a great vinyl record cleaning product. It does not contain any ammonia or alcohol, and it is a volatile solvent. After use, it will remove the dirt or dust, evaporate and leave behind a non-volatile lubricant. All you require is a lint-free cloth, the WD-40, and time.
Can you use vinegar to clean vinyl records?
Sum everything up, the best way to clean the record is cleaning vinyl records with vinegar. It is very good for cleaning. I use white vinegar and distilled water 50-50 for many years, it gives an excellent result. I highly recommend this to all vinyl lovers.
How do you make a vinyl record cleaner?
The exact mixture is one part isopropyl alcohol, one part distilled water, and one to two drops of dishwashing soap. This combination of fluids is widely recommended as an efficient mixture to clean records using what are household materials. The three ingredients were easy to measure and easy to mix.
Can you use Windex to clean vinyl records?
You can now proceed to use Windex. Remember, as it’s harsher than just water and soap, so only spray a little on the records. A few sprays will do as you’re going to spread the solution by using your microfiber cloth anyway. Wipe the records gently until the Windex dries up and polishes the records.
Why is my record crackling?
A dirty record is one of the most common reasons for crackle. Dust and dirt lodged in the record grooves act as an obstacle for your turntable’s stylus, and when the stylus hits one of these microscopic particles it will jump and create that popping sound associated with crackle.
How do you restore old vinyl records?
You can spread wood glue over the top of your record as it spins on the turntable. Once it has dried, you are simply able to peel it right off. This may help repair scratches as well as pick up dirt and debris that is deep within the grooves of the record.
Can you fix scratched records?
Apply a thin line of epoxy or wood glue to the scratched area. If there are multiple scratches, apply glue to the entire record as it spins on your turntable. Place the tip of the glue bottle to the inner label of the record and lightly apply pressure. Stop once you’ve reached the outer edge of the record.
Can I clean records with dish soap?
Of course, you can wash your records like you would your dishes. Simply put a few drops of dish soap into a tub of water. Once the record is clean, rinse the cleaning solution or any soap off with distilled water, being careful not to get the label wet.
Can you clean vinyl records with soap and water?
Absolutely you can clean vinyl records with water. It would also help to rinse or use a standard record brush with a solution on the groove surface prior to cleaning with soapy water in order to remove the larger dirt, dust, and other contaminants on the surface that could scratch during the cleaning process.
Can wood glue clean records?
You’ll find lots of cleaning products on the market for vinyl maintenance (I use Groovy Cleaner) to simply spray and gently wipe the record. But for those thrift store LPs that have been collecting dirt for years, the wood-glue method is excellent.
Does spin clean work?
It takes about three minutes per LP, so the entire process of cleaning 20 records for me was about 90 minutes. I’ve had very good results with the Spin-Clean system. I’m convinced that any noise left on the record after it has gone through the cleaning process is likely the result of groove wear or damage of some kind.
Why do new vinyls skip?
A common reason your records may skip is dust and dirt that gets into the grooves. While it may occur on old records due to storage, paper sleeves or dust in the environment, new records may also have dust or dirt. You want to remove any dust or dirt from the record before playing it to prevent skipping.
