Table of Contents
How do I clean my Polygroup Summer Waves filter?
The best way to clean a filter is to remove it from its housing unit and rinse off the residue with a high-pressure water hose. Performing this simple maintenance will extend the life of your filter.
How often should I replace my summer waves pool filter?
Replace filter cartridge every two weeks.
How do you backwash Summer Waves pool pump?
Turn off the pool pump. Turn the valve to the backwash position. Turn on the backwash valve and let water run through the backwash hose for 2 to 3 minutes, or until the water coming out runs clear. This will rinse out any organic matter in the filter.
Can I soak my pool filter in bleach?
Companies that sell pool chemicals advise against doing so, since bleach can damage the fibers of your filters and thereby shorten your filter life. Cartridge manufacturers offer a range of products to help keep your filters clean.
Can you soak your pool filter in vinegar?
You can soak a ceramic filter in vinegar, detergent or bleach just as you can a paper filter, or you can also clean it with a commercial filter-cleaning product. Because the filter has a rigid filter media, however, you also have the option to put it in the dishwasher, and that’s even easier.
Can you use pressure washer on pool filter?
Clean the cartridge using a spray nozzle on your garden hose — spray at an angle to get between the pleats. Never use a pressure washer; it will damage the cartridges. If the cartridge is really dirty, use a filter cleaner.
What type of filter for Summer Waves pool?
Product details. Make sure you keep your pool safe and clean with the Summer Waves® Type A/C Filter Cartridges. The ultra-fine, heavy-duty filter paper ensures dirt and debris does not get recirculated back into the pool.
How many chlorine tablets do I need for a 10ft pool?
Use 1 to 3 tablets at a time, depending on your pool size, or enough to establish and maintain a good chlorine level at all times. Small Intex pools, under 12′ diameter, should use 1″ tablets 2-4 at a time, in a chlorine floater.
How often do pool filters need to be replaced?
Typically, cartridge filters need to be replaced every 3 to 5 years. You can also tell your cartridge filter needs to be swapped out if you start having to clean it more often; that is, if the pressure gauge increases by 8 PSI much more often than every 6 months, you may need to replace it.
When should I change my filter cartridge?
The cartridge should be changed at least once a month. Or when you see a noticeable decrease in water flow.
How often does a pool filter need to be cleaned?
The answer to this question can vary depending on the type of filter, but generally, you should clean it once every six months. This should be sufficient as long as you are using the right kind of filter and there aren’t extenuating circumstances.
How do you backwash a pool?
This is a pretty straightforward process. Attach the backwash hose to the waste or backwash port. Turn the filter system off. Turn the multiport valve to Backwash. Turn the filter system back on. Let the water run out of the backwash port and through the backwash hose for about a minute, or until the water runs clear.
How do you clean an above ground pool that is empty?
Having drained your swimming pool, you’re ready to begin cleaning. Start this step by combining liquid soap with warm water in a large bucket. Dishwashing liquid generally works best for this task. You’ll know the solution is ready to use once it begins to form suds.
What kind of pump do I need to empty my pool?
A submersible pump, as the name implies, operates while fully submerged in water. These pumps feature a lot of horsepower, and primarily drain the water safely from swimming pools and spas. They can also drain flooded basement!. Submersible pumps of this type are often referred to as “sump pumps.”.
Does backwash drain the pool?
It is not recommended to drain a swimming pool through the backwash valve. While sucking from the main drain and putting the water down the backwash line will work in some scenarios it puts your pool pump at risk of losing prime and running dry. It is best to drain and refill a swimming pool as quickly as possible.
What setting should my pool filter be on to vacuum?
To begin vacuuming your pool: If you have a sand filter and are vacuuming to waste, set filter to “waste” option. Otherwise, leave setting on “filter” and turn pump on to begin vacuuming. Vacuum your pool just as you would vacuum your living room, picking up debris or algae as you go.
How do I get algae off the bottom of my pool without a vacuum?
A nylon or rubber brush is the correct choice for scrubbing the sides of a soft-sided above-ground pool. A large pool brush makes quick work of the job, but you may need a smaller brush to clean corners. Once the particles have been removed from the sides of the pool, turn your filter back on and agitate the water.
How long should I run my summer waves pool pump?
Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.
How do you assemble a Summer Waves pool filter?
Is it possible to clean a pool filter?
Cleaning a sand pool filter is relatively easy. You can backwash it, which you should do whenever it reaches 8-10 PSI over the normal operating level. Backwash the filter for 3 to 5 minutes again to remove dirt and debris that has been dislodged by the filter cleaner. When complete, turn off the filter pump.
