Table of Contents
What is the best cleaner for composite decking?
When it comes to cleaning decking, we recommend a basic cleaning with a composite deck cleaner or combination of soap, hot water and a soft bristle brush. Ideal times for cleaning decking are just after installation and then on a semi-annual basis (typically spring or autumn is most conducive with the weather).
What is the best way to clean plastic decking?
You may use white vinegar, apple-cider vinegar, ammonia, soap, or any of thousands of name brand variations of these. If you choose to scrub the deck clean, choose a deck brush with natural or plastic bristles. Do not use a wire brush as that will thoroughly scratch your plastic decking.
Can you pressure wash plastic decking?
Trex does not recommend the use of a pressure washer. The use of a pressure washer on deck surface could damage the decking surface and will void the warranty with respect to any condition caused by the pressure washing.
How do you rejuvenate plastic decking?
Combine half a cup of apple cider or white wine vinegar with a gallon of water and a cup of baking soda — this is the cleaning solution recommended by Trex for its decking boards. Spray down the deck, being careful to cover the entire area with the solution.
Can you use Dawn to clean composite decking?
Spray the deck with a hose to remove surface dirt and debris. Clean the deck with a soft-bristle brush and warm, soapy water. (Trex doesn’t specify a brand of soap, so a dish soap such as Dawn is a good choice.) The brush will ensure you’ll get any dirt in the embossed pattern.
Can you clean a composite deck with vinegar?
For mold removal, try cleaning composite decking with vinegar. Use your hose to remove as much of the surface grime and mold as possible. Mix two parts vinegar and one part water into a bucket and pour the solution directly on the mold. After the solution is poured, sprinkle some baking soda on the area.
How do you get green algae off a composite deck?
If the algae is all over your composite decking, you can use soapy water to rinse it down. If it’s just a tiny area, you can pour water on it. You should at least wait 10-15 minutes for it to seep into the algae you’re trying to get rid of.
How do you remove stains from plastic decking?
For minor stains, gently scrubbing it with a soft-bristle brush and some soapy water will often do the job. If the stain persists, you could use stain-removing decking products. You could also try using vinegar and baking soda. However, avoid using abrasive chemicals, such as chlorine-based bleaches and cleaners.
Can you use Simple Green on composite decking?
Simple Green Deck and Fence Cleaner is ideal for both manual and pressure washing your entire deck, lifting dirt, grease and sap from wood and composite surfaces. If using a pressure washer, avoid using a maximum pressure setting, as too much force can damage the wood fibers.
How do you clean UPVC decking?
For a cleaning product for UPVC decking, try Wash Bomb, available to buy here, which is good for removing grime and any build-up of grease from decked surfaces. Just pour it into a bucket and fill with water, ahead of applying to the surface.
What is the best homemade deck cleaner?
DIY Organic Deck Cleaner Recipes 1 gallon of warm water. 3/4 cup of oxygen bleach. 1 cup of powdered laundry detergent. 1 gallon of water. 2 cups of rubbing alcohol. 1 quart of household bleach. 1 cup of ammonia-free soap. 1 gallon of water. 1 cup of apple cider vinegar. 1/2 cup of lemon juice. 1 tablespoon of baking soda.
How do I clean my deck with vinegar and baking soda?
Vinegar and baking soda are a power couple when it comes to natural cleaners. To clean your deck, combine 1 cup vinegar with 1-gallon water. Sprinkle baking soda on any mildewed wood and use the vinegar and warm water to scrub over all the boards.
How do you clean a composite deck without a pressure washer?
For how to clean composite decking DIY, start by spraying the deck off with a hose and water to remove any surface debris. Then spray with soap, followed by gently scrubbing each deck board with a soft bristle brush. After you’ve put a little elbow grease into scrubbing, go ahead and rinse the deck thoroughly.
How do you clean composite decking with OxiClean?
Mix 1 cup OxiClean and 1 gallon water in a cleaning bucket. Rinse off your deck with the garden hose to loosen debris and buildup. Dip a nylon scrub brush into the water and OxiClean mixture and scrub it over the deck. Rinse off your deck once more to wash away all of the lifted buildup, and let the deck air dry.
Can you use OxiClean on Trex deck?
Homemade Trex Deck Cleaner You can make a simple homemade deck cleaner by combining powdered oxygen bleach, like OxiClean, with liquid dish soap and water. Add 1/4 cup of dish soap to the bleach water and mix thoroughly. Use the deck cleaning mixture as your soapy, warm water for general dirt and soil cleaning.
Can I clean my composite deck with bleach?
Most manufacturers will warn you that Bleach will fade colored composites especially when used in direct sunlight. Regular use of Chlorine Bleach can eventually lead to premature chipping, splintering, and cracking that can affect the structural integrity of your composite deck.
Can you jet wash composite decking?
Yes, it is safe to clean TimberTech composite decking with a power washer. Here are some tips to bear in mind when you’re power-washing your deck: Before washing your deck, sweep away leaves and other debris with a broom. Use a fan tip nozzle and a suitable cleaning product.
