Table of Contents
Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner and peroxide all work well too. Be sure to stay away from wax-based cleaners as they leave a pesky film on the whiteboard.
How do I get my dry erase board white again?
Rubbing alcohol, hand sanitizer, nail polish remover containing acetone, vinegar, and Windex are all safe to use on a whiteboard. To clean the whiteboard, dampen a cloth and use it to rub in the cleaning product of your choice. Rinse the cloth with cold water and use it to rinse off any remaining cleaning solution.
Can you recondition a dry erase board?
The whiteboard cannot be restored by conventional means. It may be possible to sand out the scratches using a very fine-grit sandpaper, then repaint using white dry-erase board paint; or ;buy a dry-erase “film” sheet that would fit over the existing board.
Can you use Windex to clean a dry erase board?
Use water or common household glass cleaners. Can you use Windex® to clean a dry erase board? Yes, products such as Windex® are recommended for cleaning a whiteboard. Never use scouring pads or abrasive cleaners, as those can ruin the dry erase surface and allow ink penetration.
How do you make a dry erase board look new?
Clean dry erase board marker stains with: Isopropyl Alcohol. Make sure you are using the 99% or 90% solution. Peroxide. No 99% Isopropyl alcohol on hand to clean your dry erase board? Hand Sanitizer. WD-40. Hairspray. Toothpaste. Ben-Gay. Comet.
Does WD 40 clean whiteboards?
WD-40 (paid link) is the best treatment for clean whiteboards. It held up under multiple erasings and still looked great after over a week. It’s also super easy to apply — spray on, wipe off with a paper towel.
Does rubbing alcohol damage whiteboards?
The isopropyl alcohol it contains can help boost its cleaning power, compared to toothpaste. It won’t be as economical as toothpaste, though, and it is also a slightly abrasive cleaner. It may ruin the surface of your whiteboard over time, so it’s not recommended.
What is a good whiteboard cleaner?
Warm soapy water, window cleaner and peroxide all work well too. Be sure to stay away from wax-based cleaners as they leave a pesky film on the whiteboard.
Why do whiteboards stop erasing?
When whiteboard erasers become overloaded with ink, they can no longer erase efficiently. Nearly all of the dry ink particles can be removed from the felt in your eraser by simply brushing it off with a soft-bristled hairbrush or baby brush that you don’t mind getting stained with ink dust.
Do Clorox wipes ruin dry erase boards?
Do not use glass cleaner, Clorox® wipes, or all-purpose cleaners as they will damage the whiteboard surface and void the warranty. The surface should be cleaned only with dry erase wipes, liquid board cleaner, or a damp wet cloth. Abrasives or other chemical cleansers should not be used.
How do you clean permanent marker off a whiteboard?
If someone has accidentally used a permanent marker on your board, just follow these steps: Use a fresh dry erase marker to write over top of the stains, covering them completely. Wait a few seconds for the marker to dry. Wipe away all marks with a cloth or felt eraser. The dry erase ink will lift away the permanent ink.
How do you revive a dry erase marker?
Step 1: Pour a small amount of isopropyl alcohol (rubbing alcohol) into a small container. The alcohol should be enough to cover the tip of the marker. Step 2: Soak the tip of the marker in the alcohol until the ink starts swirling out. Step 3: Replace the cap of the marker and leave it tip-side up for a day.
Can you use magic eraser on whiteboards?
Magic Eraser: By wetting a magic eraser, you are able to clean the whiteboard’s surface while removing stains and ghosting. Used Fabric Softener Sheet: A fabric softener sheet will not scratch the surface of your whiteboard, but can effectively remove dry erase ink that is on the white board for less than 24 hours.
What should you not put on a whiteboard?
Do not use: Any standard kitchen or bathroom cleaner, industrial cleaner, or solution containing isopropanol alcohol. Coarse or granular cloth like paper towels and toilet paper.
What is the active ingredient in whiteboard cleaner?
Water (CAS# 7732-18-5), Denatured alcohol (CAS# 64-17-5), Cocamidopropyl betaine (CAS# 61789-40-0), Potassium sorbate (CAS# 579-00-1), Citric acid (CAS# 77-92-9).
Can you use Lysol to clean whiteboard?
You should also know that there are a few solutions that you should NOT use on a whiteboard or dry erase board. Window cleaners (even our homemade window cleaner!), and Clorox, Lysol, or other disinfecting wipes could strip the finish on the board.
Can you use bleach on a dry erase board?
Whiteboard Cleaning and Care: Clean your cloths on a regular basis. A dirty cloth will leave ink residue on your writing surface. (Everase® Micro-Fiber Eraser Cloths are machine washable with regular detergent. No bleach.).
How can I get permanent marker off of wood?
Rubbing Alcohol Loosen and lift permanent marker spots using a dab of isopropyl alcohol on a cotton cloth. Dab lightly to saturate the spot, and then use a damp cloth to wipe away the residue. Repeat if a faint mark still remains.
Is a whiteboard the same as a dry erase board?
Whiteboards are also known as dry erase boards. This describes the act of writing with dry erase markers and easy removal of marker ink using a dry eraser or cloth. CeramicSteel whiteboards will also tolerate permanent marker and other inks.
