Table of Contents
Clean-up steps after renovating: Sweep and vacuum all surfaces, including ceilings and walls. Sweep, mop, and disinfect floors. Vacuum all upholstery. Wipe down doors, knobs, baseboards, moldings, and hardware. Thorough wipe-down and sanitization of bathrooms and kitchens (including appliances, cabinets, and counters).
How do you clean dusty floors after construction?
Make a cleaning solution by adding two cups of white vinegar to a gallon of warm water. Sponge mop a small area with as little water as possible and immediately dry completely with a towel. It may take several applications to get all the dust up and remove any white residue or dullness from wooden or tiled surfaces.
How do I clean my house after renovation?
Post Renovation Cleaning Checklist Clean interior and exterior walls. Dust fans and ceiling. Wipe all windows, window frames, doors and trims. Vacuum carpet. Vacuum and mop floors (buff where possible) Wipe all light fixtures and bulbs. Remove and dispose of all trash.
How do you clean hardwood floors after construction?
For hard surface flooring: To help eliminate fine particles of dirt and grit that can act like sandpaper and will scratch any floor, vacuum or sweep. Do not vacuum with a beater bar unless the beater bar is switched off. Use a dust mop to remove any remaining particles.
How do you clean cement dust off the floor?
STEP 1: Pour equal parts of water and vinegar into a spray bottle. STEP 2: Spray the solution on every floor, wall, and furniture with cement dust and then let it sit for 2 minutes. After 2 minutes, spray again and wipe the surfaces with a soft cloth as you spray, cleaning up the cement dust.
How do you clean walls after construction?
Wipe walls with a soft damp towel to collect dust and to wipe it away. For hard to reach areas wrap the towel around the bottom of your broom and secure it with tape. If your walls were painted recently, avoid using anything moist as it may damage the paint. Let the walls dry for about 30 days before cleaning.
Is construction dust harmful?
Construction dust is not just a nuisance; it can seriously damage your health and some types can eventually even kill. Regularly breathing these dusts over a long time can therefore cause life-changing lung diseases.
Should contractors clean up after themselves?
Some contractors clean up as they work, some clean up at the end of the day, and others clean up at the end of the project or subcontract with a separate cleanup company. Ask the contractor if there’s anything you can do to reduce the amount of mess and the effect on your home and quality of life.
What is included in post-construction cleaning?
It involves vacuuming carpets, cleaning floors, wiping down all kitchen and bathroom surfaces, cleaning window sills, removing adhesive from doors, windows and appliances, and removing any lingering debris. Other tasks include removing dust from light fixtures, ceiling fans, duct work and vents.
What is after construction cleaning?
Post-construction cleaning is a cleaning service done to new or renovated buildings. From the word itself, “post-construction,” it is understood that this cleaning is done after the construction part. Walls are clean and are free from marks, dirt, and smudges. Power washing and cleaning of windows and frames.
How do you clean really dirty hardwood floors?
Tip Sweep the floor thoroughly with a vacuum cleaner. Pour 1/4 cup of apple cider vinegar in a clean mop bucket. Dip a cotton cleaning cloth in the vinegar solution. Wipe the cloth over a 3-by-3-foot section of the wood floor to remove dirt and grime buildup.
Can you use Pine Sol on hardwood floors?
We like using Pine-Sol® Original Pine Multi-Surface Cleaner on hardwood floors. You can also use Pine-Sol® Original Squirt ‘N Mop®. It’s safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle.
Is Swiffer safe for wood floors?
You can safely use Swiffer products on hardwood floors. For a quick clean, try Swiffer WetJet Wood Starter Kit. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won’t damage them. Go with the grain to ensure the best clean possible.
Does concrete dust linger?
Concrete dust – the most common form of dust typically resides in the air for a longer period. Being in an airborne state longer makes this dust more susceptible for workers to breathe in.
Can you vacuum up concrete dust?
The particles in concrete dust are very fine; simply vacuuming will not remove it all. Use a liquid to remove all of the dust. Water alone doesn’t pick up all of the particles and requires multiple cleanings; this solution actually suspends the particles, and makes it easier for the rag to absorb them.
How do you charge for post construction clean-up?
Construction cleanup costs $469 on average with a typical range between $275 and $694 for residential services. For large projects or those that include multiple visits, you might pay up to $3,000. You’ll spend anywhere from $0.10 to $0.50 per square foot or $30 to $50 per hour for per site cleanup pass.
How long does construction dust stay in air?
Silica dust can stay in the air for up to two weeks, depending on the amount of dust and how ventilated, dry, or windy the area is. The most important aspects of limiting airborne silica dust are isolating the area and conducting work with safe practices.
What happens if you breathe in construction dust?
Fine dust particles are dangerous, especially if they’re silica dust particles. Once inhaled, the dust can reduce your lung capacity, increase overall strain on your heart, and cause a variety of diseases. You may also experience irritation in your eyes, nose, throat, skin, and lungs.
Is it safe to live near construction?
It can be risky to live near one of these construction sites. Debris can fall from great heights during construction. There is also the possibility of construction mishaps that might affect neighbors and pedestrians. Scaffolding can also fail during construction.
