Table of Contents
How to Clean an Electric Fireplace Turn off the unit. Remove or open glass doors. Dust your logs, stones, andirons or hearth with a clean cloth. Vacuum vents with a hand vacuum or hose attachment. Use a duster or damp clean cloth to wipe down the inside and outside of your fireplace walls.
How do you clean the inside of a electric fireplace?
Dust may accumulate inside your electric fireplace, like any other unit in your home. To remove any dust, simply use a clean, dry cloth to wipe down the interior. Gently dust any media such as logs or glass inside your electric fireplace as well.
How do you clean dust from an electric fire?
All you need to get rid of that dust or any marks from the outside of the fireplace is a slightly damp, lint-free cloth. Dip your cloth into soapy warm water and ring it out as much as possible before using it. Stay away from abrasive cleaners and harsh detergents.
How do you open an electric fireplace?
How To Open An Electric Fireplace Freestanding electric fireplaces can typically be opened at the back. To open your electric fireplace, you’ll need a screwdriver and some rubber gloves. To open an electric fireplace by removing the back plate, simply remove the screws one by one from the back of the fireplace unit.
Do you have to service an electric fireplace?
Your gas or electric fireplace will last longer if you keep it well maintained and serviced. If you have a wood-burning fireplace, you should have your chimney swept and basic maintenance done at least once a year. Gas and electric fireplaces need less frequent maintenance.
How do you clean a Duraflame electric fireplace?
Tip Turn off the heater. Unplug the power cord from the wall receptacle. Lift up the filter cover at the back of the unit. Pull the filter cover out. Remove the air filter from the heater. Use a vacuum cleaner hose to removed the buildup from both sides of the air filter. Replace the filter cover.
How do you clean the inside of a fireplace insert?
Mix together a teaspoon of liquid dishwashing soap, a half-cup of baking soda and one gallon of warm water in a large bucket. Use the solution and a rag to clean the fireplace insert. Depending on how much creosote and grime have built-up, you may have to scrub vigorously to loosen the mess.
Where do the crystals go in an electric fireplace?
If you want a more contemporary looking fireplace, use just the crystals. They just lay in the trough area. If you want a more traditional looking fire, place the log pieces in the order as shown in the directions. Once you have those in-place you can fill the void areas of the trough with crystals.
How do you remove built in electric fireplace?
To remove an electric fireplace insert, check for any connections holding the insert in place and remove them, and pull the electric insert out of where it currently sits until the electrical connection can be seen. Unplug the electric insert from the outlet and pull the electric insert out completely.
What could go wrong with an electric fireplace?
A tightly bent or over-stretched power cord may be causing the problem. Check your fuse box or breaker for any switches that have tripped. Inspect the fuse on the electric fireplace and replace if necessary. Try another wall socket.
Why does my electric fire keep cutting out?
Overheating. An electric fireplace will automatically shut off when it starts to overheat. This is to prevent to the unit from overheating causing damage to the fireplace itself, or becoming a fire hazard for your home.
How long do electric fireplace last?
Electric fireplaces can last for 10-20 years depending on how frequently they are used. Many manufacturers offer warranties ranging from 1 year to 10 years depending on the model.
How do I make my electric fireplace brighter?
Some electric fireplaces come with canopy, or overhead, accent lighting. These LED lights can be very bright, and may wash out the flames below. Turning the overhead lighting off, or choosing a warmer colour, will help the flame to be more visible and vibrant.
How do you clean a Dimplex electric fireplace filter?
Purifire™ Filter: Some Dimplex fireplaces are equipped with a Purifire™ Filter. This filter is reusable and washable. To clean the filter, gently tap it on a hard surface to dislodge any loose dirt or debris and then gently clean with water. We do not recommend using any soap or cleaning products on your filter.
How do you clean an electric heater?
Spray the interior compartment of the heater with a compressed air duster to loosen dry dust and debris. If you are cleaning a space heater without a cover, target the heater’s vents and slats with the compressed air duster’s nozzle. Free any lose dust from the heating element with a few sprays of air as necessary.
Do fireplace inserts need to be cleaned?
Wood-burning fireplaces, stoves and inserts These wood-burning appliances will all need regular vent-system/chimney cleaning to reduce the buildup of creosote, which forms when wood burns. Creosote is highly flammable and can appear inside the flue as a solid, sticky or puffy substance.
How often should you clean a fireplace insert?
According to the Chimney Safety Institute of America (CSIA), fireplaces need to be cleaned once there is 1/8″ of creosote and/or soot buildup inside the chimney liner. According to the National Fire Protection Association (NFPA), all chimneys should be cleaned at least once every year, regardless.
Do you have to clean a fireplace insert?
Most new inserts are installed with a baffle above the combustion chamber (or firebox), usually made of firebrick; that baffle will be removed (and cleaned) so that the creosote can be swept from the flue. To keep your masonry chimney operating safely and efficiently, have it swept and cleaned regularly.
