Table of Contents
Scrape off any caked-on dirt and wipe away crumbs. Next, add a few drops of dish soap to a wet sponge, and give the butcher block a good scrub. Scrubbing along the grain of the wood will make the countertops cleaner. Rinse the sponge, and wipe the counter down with the rinsed sponge.
Which cleaner should be used for butcher block tables?
Food residue may be scraped away with a smooth, flat, and ideally plastic spatula, and the surface should be sponged off with only mild-dishwashing soap. Undiluted vinegar, by the by, works great for cleaning and disinfecting butcher block, and this type of vinegar does not leave behind a strong, pungent odor.
Can you use Clorox wipes on butcher block countertops?
Disinfecting. To disinfect your Traditions butcher block after cleaning use Lysol® or Clorox® Disinfecting Wipes. These wipes are available at Lowe’s, and report to kill 99.9% of viruses and bacteria when used as directed.
How do you clean a wooden butcher block?
While wood has anti-bacterial properties, you should still disinfect a butcher block countertop. After you’ve cleaned it off, spray a mixture of white vinegar and water on the surface, spread it around with a damp cloth, let it soak in for a minute or two, and then wipe it off.
How do you refresh a butcher block table?
Pour a wax-and-oil finish, like Butcher Block Conditioner, onto the wood and rub it back and forth with a lint-free cloth. Wait 20 minutes, then buff with a clean cotton cloth. To maintain the countertop’s stain resistance, reapply whenever the wood looks dry.
What is the best oil to use on a butcher block?
Food-safe mineral oil is recommended for regular upkeep and helps keep the surface stain-repellant and looking its best. However, repeated applications won’t build the surface or help repair minor wear like other products. Mineral oil also provides the most matte sheen of all our suggestions.
How do you clean a butcher block with lemon and salt?
Cleaning a Wood Cutting Board With Lemon and Salt Take a lemon and cut it in half. Scrub the salt down each side of the cutting board using the lemon with the fleshy side down. Let the salt and lemon solution sit for approximately five minutes. Finally, clean off the board with a sponge, rinse, and dry.
Can you use Windex on butcher block countertops?
From Waterlox’s website: “Avoid ammonia-based or bleach-based cleaning products like Lysol, Fantastik, 409, Windex (ammonia and bleach-based products will soften the oil finish if used frequently).” You just have to be really careful about only using soap and water to clean them.
Can I use all purpose cleaner on butcher block countertops?
Maintaining butcher block is a breeze. You don’t need a specialized product, and you can use just about any cleaner you have in your cupboard.
Can butcher block get wet?
You can’t avoid getting your wood countertops wet when you’re preparing food. The finish we use on butcher block is food-safe. It’s not waterproof, but the type of moisture that touches butcher block shouldn’t damage the wood as long as you clean up immediately after preparing your meal.
What is the best way to clean butcher block countertops?
Scrub the countertop: Take a scrub brush or sponge and scrub the countertop with hot water and mild dish soap. Rinse with hot water: Run a clean dish cloth through hot water and rinse the countertop well. Sanitize with vinegar: Spray undiluted white vinegar onto the countertop, and let sit for a few minutes.
Can I use bleach on butcher block?
Bleach: Bleach should be used as a last resort as it may discolor the wood and the smell may linger for days. If you must use bleach, create a solution using equal parts bleach and water and apply to your butcher block using a damp sponge or rag.
How do you condition a butcher block countertop?
How To Condition. Over time, butcher-block countertops can lose their luster and look dull and dry. Give them a refresh with food-safe mineral oil or butcher-block conditioner (available at home improvement stores). Don’t use a food oil, like olive or vegetable oil, which will oxidize on the surface and start to smell.
How do you remove water stains from butcher block?
Make the solution: Mix 1 tablespoon hydrogen peroxide in a cup of warm water. Apply the solution: Dab the solution onto the stain with cotton ball or cloth. Make sure to completely cover the stain. Dab again lightly with white vinegar.
Do you need to sand butcher block countertops?
If you have an old, stained, or slightly damaged butcher block kitchen countertop, you can refinish it to make it like new again. The only tools required are sandpaper and mineral oil (a palm sander is optional). Here are some tips and tricks to refinish the butcher block countertop in your home.
How often should you oil a butcher block?
5. When determining how often to oil a block, the general rule of thumb is once a day for a week upon purchase; once a week for a month; and once a month forever. The block should be oiled whenever the wood starts to look dry and chalky.
Can you over oil a butcher block?
There is no such thing as using too much butcher block oil. Once the wood is fully saturated with oil, it will not take on any more oil.
Is food grade mineral oil the same as laxative mineral oil?
Mineral oil is one of the best and most common ingredients to keep the wood in peak condition. However, food-grade mineral oil is very safe, odorless, and tasteless. It has been used as a laxative and skin softener for generations.
