Table of Contents
Rubbing alcohol, hand sanitizer, nail polish remover containing acetone, vinegar, and Windex are all safe to use on a whiteboard. To clean the whiteboard, dampen a cloth and use it to rub in the cleaning product of your choice. Rinse the cloth with cold water and use it to rinse off any remaining cleaning solution.
How do you make a dry erase board look new?
Clean dry erase board marker stains with: Isopropyl Alcohol. Make sure you are using the 99% or 90% solution. Peroxide. No 99% Isopropyl alcohol on hand to clean your dry erase board? Hand Sanitizer. WD-40. Hairspray. Toothpaste. Ben-Gay. Comet.
What is the best cleaner for dry erase boards?
Isopropyl alcohol, often referred to as rubbing alcohol, and hydrogen peroxide are very effective ways to clean whiteboards. They are especially effective at getting rid of ghosting caused by chemical build up residue from whiteboard markers. For best results, use 99% or 90% isopropyl alcohol.
Does WD 40 clean whiteboards?
WD-40 (paid link) is the best treatment for clean whiteboards. It held up under multiple erasings and still looked great after over a week. It’s also super easy to apply — spray on, wipe off with a paper towel.
How do you restore a whiteboard that won’t erase?
To fix both of these problems, put some isopropyl alcohol on a paper towel, and wipe down the entire board. Switch paper towels as it starts getting dry or as it fills up with stains. Repeat as necessary until the entire whiteboard feels smooth to the touch.
Can you use Windex to clean a dry erase board?
Use water or common household glass cleaners. Can you use Windex® to clean a dry erase board? Yes, products such as Windex® are recommended for cleaning a whiteboard. Never use scouring pads or abrasive cleaners, as those can ruin the dry erase surface and allow ink penetration.
Can you use Clorox wipes on dry erase boards?
Do not use glass cleaner, Clorox® wipes, or all-purpose cleaners as they will damage the whiteboard surface and void the warranty. The surface should be cleaned only with dry erase wipes, liquid board cleaner, or a damp wet cloth. Abrasives or other chemical cleansers should not be used.
Can you use magic eraser on whiteboards?
Magic Eraser: By wetting a magic eraser, you are able to clean the whiteboard’s surface while removing stains and ghosting. Used Fabric Softener Sheet: A fabric softener sheet will not scratch the surface of your whiteboard, but can effectively remove dry erase ink that is on the white board for less than 24 hours.
How do you revive a whiteboard marker?
Step 1: Pour a small amount of isopropyl alcohol (rubbing alcohol) into a small container. The alcohol should be enough to cover the tip of the marker. Step 2: Soak the tip of the marker in the alcohol until the ink starts swirling out. Step 3: Replace the cap of the marker and leave it tip-side up for a day.
Why do whiteboards stop erasing?
When whiteboard erasers become overloaded with ink, they can no longer erase efficiently. Nearly all of the dry ink particles can be removed from the felt in your eraser by simply brushing it off with a soft-bristled hairbrush or baby brush that you don’t mind getting stained with ink dust.
What can I do with an old whiteboard?
The whiteboard cannot be restored by conventional means. It may be possible to sand out the scratches using a very fine-grit sandpaper, then repaint using white dry-erase board paint; or ;buy a dry-erase “film” sheet that would fit over the existing board.
How do you remove ghosting from a whiteboard?
For better results, cover the board in black dry-erase marker and erase it quickly. Wet makers have chemicals that loosen the ghost marks, thereby, helping get rid of stubborn stains. For very stubborn stains, use propyl alcohol and dry it off quickly.
What should you not put on a whiteboard?
Do not use: Any standard kitchen or bathroom cleaner, industrial cleaner, or solution containing isopropanol alcohol. Coarse or granular cloth like paper towels and toilet paper.
Can you use bleach on a dry erase board?
Whiteboard Cleaning and Care: Clean your cloths on a regular basis. A dirty cloth will leave ink residue on your writing surface. (Everase® Micro-Fiber Eraser Cloths are machine washable with regular detergent. No bleach.).
Can you use Lysol to clean whiteboard?
You should also know that there are a few solutions that you should NOT use on a whiteboard or dry erase board. Window cleaners (even our homemade window cleaner!), and Clorox, Lysol, or other disinfecting wipes could strip the finish on the board.
Does permanent marker stay on dry erase board?
Contrary to it’s name, the permanent marker is not so permanent on a dry erase board with lines. It will just wipe away when the dry erase marker touches the permanent. This happens because permanent and dry-erase markers both contain in their ink, a non-polar solvent.
How do you clean marks off a whiteboard?
Some of the most popular cleaners for a whiteboard are: Isopropyl (rubbing) alcohol. Hand sanitizer. Acetone or nail polish remover that contains acetone. Water mixed with several drops of dish soap. Orange cleaners (such as Goo Gone and Fantastik) Glass cleaner. Baby wipes. Pam or other spray cooking oils.
