Table of Contents
What is the best cleaner for Trex decking?
Clean the deck with a soft-bristle brush and warm, soapy water. (Trex doesn’t specify a brand of soap, so a dish soap such as Dawn is a good choice.) The brush will ensure you’ll get any dirt in the embossed pattern.
Can you power wash a Trex deck?
Use of a power washer will damage the decking surface and will void the warranty with respect to any condition caused by the power washing. Trex high-performance decking (Trex Transcend, Trex Enhance and Trex Select) can be power washed. Use only a fan tip and up to a 3100 psi power washer to remove dirt and debris.
How do I make my Trex deck look new again?
Remove larger items of debris by hand or with a broom, then use a water hose to spray down the surface of the decking. Combine half a cup of apple cider or white wine vinegar with a gallon of water and a cup of baking soda — this is the cleaning solution recommended by Trex for its decking boards.
How do you remove mildew from Trex decking?
Mix two parts vinegar and one part water into a bucket and pour the solution directly on the mold. After the solution is poured, sprinkle some baking soda on the area. Let this compound sit and soak for 20 minutes and then use your gentle bristle brush to scrub the area and remove any leftover mold and mildew.
How do you clean dirty composite decking?
Spray deck with soap, then follow by gently scrubbing each deck board with a soft bristle brush. Spray/rinse each individual deck board using a fan tip no closer than 8-in (203 mm) from the decking surface. RINSE THOROUGHLY. If dirty water from cleaning is left to dry, a film will remain on the decking surface.
How do you clean a composite deck without a pressure washer?
For how to clean composite decking DIY, start by spraying the deck off with a hose and water to remove any surface debris. Then spray with soap, followed by gently scrubbing each deck board with a soft bristle brush. After you’ve put a little elbow grease into scrubbing, go ahead and rinse the deck thoroughly.
How do you clean Trex decking with vinegar?
For a composite deck: Combine a half-cup of white vinegar or apple cider vinegar to ¼ a cup of baking soda with 1 gallon of water. Swab this mixture on the entire deck and rinse well with clean water. Avoid homemade deck cleaners or brighteners when using a pressure washer or power washer.
Can you use OxiClean on Trex deck?
Homemade Trex Deck Cleaner You can make a simple homemade deck cleaner by combining powdered oxygen bleach, like OxiClean, with liquid dish soap and water. This cleaner is mild and environmentally friendlier than chlorine bleach cleaners. Add two cups of the oxygen bleach powder to two gallons of warm water.
Why is my composite deck turning white?
Probably the first thing a homeowner will notice is white spots on the deck. These are exposed wood particles bleached by the sun and rain. This is a sure sign that the deck’s seal has been damaged.
How do you clean composite decking with OxiClean?
How to Use OxiClean to Wash a Deck Mix 1 cup OxiClean and 1 gallon water in a cleaning bucket. Rinse off your deck with the garden hose to loosen debris and buildup. Dip a nylon scrub brush into the water and OxiClean mixture and scrub it over the deck.
Can you jet wash composite decking?
Yes, it is safe to clean TimberTech composite decking with a power washer. Before washing your deck, sweep away leaves and other debris with a broom. Use a fan tip nozzle and a suitable cleaning product. Do not exceed a maximum pressure of 1500 psi.
Can I use Simple Green on Trex deck?
Using a mild soap like Simple Green for cleaning a composite deck is usually all you need. We are so happy with a lower maintenance deck after building our Deckorators Composite Decking 2 years ago which still looks brand new.
Can bleach be used on Trex decking?
Harsh chemicals, such as bleach, are NOT recommended on any composite surface! These chemicals can eat away at the composite structure and leave permanent discolorations and damage.
How do you remove moss from Trex decking?
Steps for Cleaning Moss & Algae from Your Deck Step 1: Make your cleaning solution. Fill a bucket with one gallon of warm water and ¾ cup of chlorine bleach. Step 2: Apply the solution. After the solution has been mixed, pour it onto your deck and allow it to sit for 10-15 minutes. Step 3: Scrub. Step 4: Rinse.
Can I use floor cleaner on composite decking?
Although the surface looks solid, composite decking is actually quite porous. Therefore, it needs an oxygenated cleaner that can reach deep into the material and clean inside the deck as well as the surface. When purchasing a cleaner, always check the label and NEVER use a Chlorine Bleach based “deck cleaner”.
