Table of Contents
Drain the water in the swamp cooler by opening the drain plug or siphoning with a hose. Brush the inside of the swamp cooler with a stiff-bristled brush or whisk broom. Use a wet/dry shop vacuum to remove the dust and dirt quickly. Pour the white vinegar into the water reservoir and allow to soak for an hour.
Can you run vinegar through a swamp cooler?
Clean. Add a cup of vinegar to the cooler pan and let the vinegar cycle through the system for up to an hour. This will eliminate odors, mold, mildew and some corrosion, calcium deposits and other types of build-up.
How do you clean mold out of a swamp cooler?
Step 1: Submerge the pads with lemon juice or Vinegar Step 1: Submerge the pads with lemon juice or Vinegar. Submerge them in a mixture of water and lemon juice for 30 -60 seconds. Note: Use Vinegar, but the smell can soak into your cooling pads and can be very difficult to remove. Step 2: Air dried cooling pad.
How often should you clean a swamp cooler?
For heavy use, it’s a good idea to give it a full cleaning three times a year: Once before you begin use in the spring, once in the middle of the season, and once at the end before you pack it away. You’ll also want to drain the tank and refill it with fresh water at least once a month.
How do I stop my swamp cooler from smelling?
Pour two or three drops of tea tree oil or grapefruit seed extract into the water in the swamp cooler. These substances will help neutralize offending odors and prohibit the formation of mold and mildew that can form within the unit. Tea tree oil is very effective but produces a strong aroma that may offend some.
Do swamp coolers need to be cleaned?
Swamp coolers provide cool air through water evaporation. This method of cooling saves more energy than using an air conditioner. You should clean your unit at least once each year.
Can you put fabric softener in a swamp cooler?
You should use fabric softeners or essential oils added to the water sparingly to avoid possible health risks or damage to your cooler. A little hydrogen peroxide can prevent problems before they start. Never attempt electrical repairs on your own; call a qualified professional.
How often should swamp cooler pads be replaced?
Cleaning your pads annually helps manage mineral buildup, makes the pads last longer, removes foreign matter (like cottonwood seeds) and improves efficiency. For Mastercool swamp coolers, you should clean the pads annually and replace them every 3-5 years.
How do you maintain a swamp cooler?
If you use a swamp cooler often during the hotter months, it’s important to clean it regularly: Always clean it before startup. Wipe down the exterior with a damp cloth every few weeks. Don’t clean the unit with any surface cleaners, chemicals or solvents – warm water is sufficient.
Why does my swamp cooler smell fishy?
The cooling pads, which are typically saturated with water to produce cooling, may have developed mold and / or mildew. When the system runs, it may be emitting this fishy or moldy smell, as a result. This is especially common if you have been running the swamp cooler constantly, and water has been continuously used.
What can I put in my cooler to not smell?
Mix Baking Soda & Water Mix baking soda and water and rub it along the inside of the cooler. Close the lid and let the paste sit for a day or two before rinsing out.
How do I get the fishy smell out of my air cooler?
So how do you get rid of the fish smell and clean a cooler? After thoroughly rinsing the cooler, drop one tablespoon of liquid dish soap and a quarter to half cup of baking soda into the cooler. Add a generous spray of water and scrub using a green dish scrubbing pad.
Why does my swamp cooler smell like skunk?
Methyl mercaptan is usually the culprit when it comes to gas that distinctly smells like a skunk. Once this gas gets into the air of your house, you and your family are at risk. The minute that you smell it you should get out of the house and call your gas company.
Can I put essential oil in air cooler?
Many have bought into the idea of adding essential oils to make the machine and the air it produces to smell better. After cleaning the evaporative cooler, just spray the essential oil mixture into the machine and that will be all. Use your favorite essential oil to make your home or office space smell fresh and great.
What is the white stuff on my swamp cooler?
Mineral Buildup on a Swamp Cooler An evaporative cooler works by evaporating water in the air stream. If all of the water evaporates, the “stuff” in the water (minerals—calcium, magnesium, sodium) will be left behind. And evaporative coolers operating on “soft water” can leave a powdery white residue—sodium.
How do you prevent scale buildup in a swamp cooler?
Regular Maintenance Use Quality Pads. The quality of cooler pads you use on your evaporative cooling unit determines your coolant’s ability to prevent deposit accumulation. Clean the Cooler Regularly. Add a Bleed-Off Valve. Shut the Evaporative Cooler.
Should I use distilled water in my swamp cooler?
Or you can use distilled water — water that has been turned into steam and then cooled again to remove salts, calcium and other minerals. This is even better than filtered water for use in an evaporative cooler because of its total lack of hard-water minerals.
