Table of Contents
Combine 1 teaspoon of liquid dishwashing detergent with 1 quart of water in a spray bottle. Alternatively, use a nonabrasive tub and shower cleaner. Spray the tub surround with the cleaner. Scrub clean with a rag.
What is the best cleaner for plastic bathtubs?
For cleaning your plastic bathtub, rubbing alcohol is the best you can use. To clean your tub, start by flushing it out with hot water. Let it sit for about 10 minutes. Then, rub or wipe the surface of the tub with some rubbing alcohol on a wet paper towel or cotton ball to remove stains or mildew.
How do you clean a vinyl tub surround?
Soft, non-abrasive gel or cream cleansers, dish soap, laundry detergent and many commercial bathroom cleaners are safe for use on vinyl tub enclosures. Alternatively, homemade cleaners such as a mixture of baking soda and water or trisodium phosphate and water are also safe.
How do I clean my tub surround?
With white vinegar, spray it all over the tub surround or soak your cloth with the vinegar and wipe it over the surfaces before rinsing. Bleach should be diluted in water with approximately equal parts of each, sprayed or wiped on the surfaces and then rinsed with water.
How do I get my plastic bath to shine again?
Overstock recommends mixing a solution of equal parts vinegar and water and using a spray bottle to apply it all over your plastic bathroom fitting. Vinegar may take time to cut through grease, so it can be left for several minutes before being wiped away.
How do you clean a dirty shower surround?
Spray the vinegar/water cleaner onto the shower walls, coating them with a sufficient amount. Allow the solution to sit and work for at least 30 minutes. For heavier hard water stains and soap scum buildup, leave it one for up to an hour. Use a dry microfiber soft towel to scrub areas before rinsing them.
How do you clean an old shower surround?
For weekly cleanings, pour 1 cup of water, 1 cup of vinegar and 1 tablespoon of dish soap into a spray bottle. Spray this right on the fiberglass surfaces and allow it to sit for at least 15 minutes. Scrub gently with a nonabrasive sponge and rinse with clean water.
How can I tell if my tub is acrylic or fiberglass?
Look around the tub’s edges and see if it appears thinner; this could be an indication that it is acrylic. Acrylic tubs usually come in more colors than fiberglass tubs, as fiberglass tubs are commonly white. Acrylic also feels warmer to the touch than fiberglass, and tubs made of acrylic have smoother finishes.
Is vinegar safe for acrylic tub?
To gently clean your acrylic tub, you can use natural products like vinegar, baking soda and lemon. You can also buy commercial cleaners designed for acrylic tubs. Remember to clean the tile area above your acrylic tub, so the space will really shine.
What can you clean an acrylic tub with?
Cleaning an Acrylic Bathtub Scatter baking soda or mild cleaning product throughout the tub and allow it to sit for 5-10 minutes. Use a damp cloth or sponge to scrub the baking soda into the tub and faucets. Use a bristle brush to capture dirt in corners and along the bathtub edges. Rinse the tub and wipe clean.
How do I make my tub surround shine?
Sprinkle baking soda onto the tub’s surfaces and use the wet sponge to scrub it in gently. The combination of the vinegar’s cleaning and disinfecting properties, along with the mild abrasiveness of the baking soda, will clean your tub thoroughly and bring it back to a shine.
How do you clean a dull bathtub?
Mix water and vinegar in a spray bottle. Follow a 2:1 water-to-vinegar ratio for fiberglass and a 1:1 water-to-vinegar ratio for porcelain tubs. Add a teaspoon of lemon juice for scent and an extra cleaning boost. Spray the entire tub with the solution and allow it to sit on the surface for 15 to 20 minutes.
How can I make my bathtub look new?
Diluted bleach is particularly effective at combating mold and mildew growth in your tub. If you have dirty tiles around the tub, ordinary hydrogen peroxide is an effective tile and grout cleaner, and white vinegar is good for cleaning bathtub fixtures. Never use all of these chemicals at once, though.
What is best cleaner for fiberglass tubs?
Most Effective & Quickest Fiberglass Cleaner: Weiman Bath Tub Cleaner. Cleaning without Scrubbing: RMR-86 Instant Mold Stain & Mildew Stain Remover. Rejuvenate Scrub Free Soap Scum Remover. Drillbrush All Purpose Power Scrubber Cleaning Kit. Gel-Gloss TRKIT-GA12. Star Brite Ultimate Fiberglass Stain Remover.
Will vinegar clean a fiberglass tub?
Before you give up on trying to scrub away the stains, try the cleaning process Home Depot recommends for tough stains on fiberglass: Smear on a paste of baking soda and water, and cover that with a towel soaked in vinegar. Wait one hour, then rub with a cloth or sponge. Rinse.
What should you not use on a fiberglass tub?
Spotless fiberglass showers Avoid harsh chemicals, especially bleach. Abrasive pads and scourers should be avoided too. Use mild, household acids like vinegar and hydrogen peroxide. For abrasive effects, mix your mild acid with baking soda and dishwashing soap.
How do I know if my shower is fiberglass or acrylic?
Looking closely at the edges of your tub, thin edges could mean fiberglass, while thicker edges could indicate acrylic. Another tip to rule out cast iron as a material, hold a magnet to the side and see if it sticks. If it does not stick, you most likely have either fiberglass or acrylic.
How can you tell plastic from fiberglass?
Although fiberglass also looks like plastic, it is actually not a type of plastic. The main difference between fiberglass and plastic is that fiberglass is inorganic whereas plastic is organic.
