Table of Contents
Use your pliers or wrench to remove the pilot light and thermocouple from the bracket. Using the wire brush, brush away the carbon buildup and soot from both components. For hard to reach areas and stubborn buildup, use the metal file. Wipe away dust with a soft cloth or burst of compressed air.
Can a pilot light get clogged?
Like any appliances that use combustion, your pilot light can one day become clogged up with carbon residue and/or soot. This is why it is recommended to clean it periodically to keep it in a proper working state.
What do you do if your pilot light won’t stay lit?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
Why is my pilot light going out?
A faulty, misaligned, dirty, or damaged thermocouple is often the culprit behind your pilot light going out. The thermocouple is an automatic safety shutoff device that prevents the gas valve from opening if the pilot light is out.
How do you fix a gas fire that keeps going out?
Easy DIY Fix: Gas Fireplace Won’t Stay Lit Before You Begin: Is Your Pilot Light Lit Inside Fireplace? The Fix: Pilot Light to Gas Fireplace Won’t Stay Lit. Check Your Thermopile Output with the TH/TP Contacts. Don’t Replace Your Thermopile or Thermocouple Right Away. Cleaning the Thermopile. Re-test the Cleaned Thermopile.
How do you clean a dirty thermocouple?
The best way to clean your thermocouple is to use either a piece of steel wool or the coarse side of a sponge to gently clean off any soot or other remnants. You can use a pencil eraser to clean between the threads of the screw that connects the thermocouple to the control valve of your system.
Why is my gas heater keep shutting off?
If your furnace keeps shutting off, it could be due to low airflow. There are several indirect issues that cause low airflow. Dirty Air Filters. If you don’t change your air filters often enough, the filters will become dirty and clogged, which means the heat exchanger retains heat and eventually causes it to overheat.
Why won’t the pilot stay lit on my wall heater?
The Pilot Won’t Stay Lit A pilot that won’t stay lit could be the result of a blockage in the pilot tube. Turn off the gas, clear the tube with compressed air, and relight the pilot. If that doesn’t work, you may need to call a repairman to come and install a new thermocouple.
How do you clean the pilot light on a propane fireplace?
How to Clean A Pilot Light On Gas Fireplace: Turn off the gas and light switch. Remove the glass assembly. Take a photo of the logs’ position. Remove the logs. Clean the pilot assembly with a compressed air spray. Reassemble everything in reverse order. Test the pilot light.
How do you clean the pilot light on a gas oven?
If there is no valve right behind your oven, you’ll have to turn off the main gas line. After the gas to the oven is turned off, find the pilot light and blow it out. Once the flame is out and the gas is turned off, it’s completely safe to clean your oven using ammonia!Nov 26, 2020.
Can you clean a pilot assembly?
If your pilot will not stay lit, try cleaning it. Use a can of compressed air, such as is used to clean a computer, to blow dust out of the pilot assembly. Sometimes just blowing air back through the pilot will get rid of the dirt. If that fails, turn off the gas supply to the heater.
Do I need to turn gas off if pilot light goes out?
Since the thermocouple regulates gas going to the pilot, it should cut off on its own if the pilot ever goes out, but that’s only if it’s functioning correctly. If the thermocouple isn’t working properly, then it’s possible that it’s allowing gas to leak into the very room where the heater is located.
Does gas still flow when pilot light goes out?
If your pilot light repeatedly goes out, this is a likely culprit. If this flame sensor should fail, gas will continue to flow even after the pilot light has been extinguished, causing a safety hazard, and requiring immediate repair.
Will gas leak if pilot light is off?
Although this is an area of concern for many people, the reality is that boilers are built so that the gas supply to the pilot light is shut off if the flame goes out. Whilst the cause of pilot light failure needs to be investigated, extinguished pilot lights aren’t going to cause a gas leak.
What causes a gas fireplace flame to go out?
A common problem with gas fireplaces lies in the components called the ignition assembly. When a fireplace refuses to remain lit, there’s probably an issue in one of the several pieces that make up the ignition assembly, which are: the pilot light assembly, pilot tubing, thermocouple, and thermopile.
