Table of Contents
Do I need to clean my hot tub cover?
Cleaning your cover every one to three months is a great way to both preserve your cover and protect your hot tub. Regular cleaning not only safeguards your cover from everyday wear and tear as well as the affects of Mother Nature, but it also prevents chemical damage and the growth of mold.
How do you get mold out of a hot tub cover?
If your hot tub cover is moldy, give it a thorough cleaning. Remove it from your hot tub, then spray it with a mixture of dish soap and water and wipe it down. Following up with a conditioner like Hot Spring Cover Shield™ will help keep your cover in good working condition for longer.
Can you wash hot tub covers?
Using a very small amount of mild detergent on a soft cloth, start gently rubbing the hot tub cover to free up and dirt trapped in the vinyl. Tree sap can be removed by using a little vegetable oil. Your hot tub cover should now look clean and dirt free. Now to apply suncream to your hot tub cover.
Why does my hot tub cover smell?
Dirty Hot Tub Cover This is perhaps the most common reason why hot tub covers become smelly. If the cover is not cleaned and maintained regularly, it will be affected by dirt, dust, rain, pollen, pollution and other elements. When it becomes waterlogged, dark and smelly, slime will grow.
Why am I getting mold on my hot tub cover?
Dust and dirt build up on your cover will eventually transfer to your water which will in turn cause bacteria to grow in the moisture and build up on the bottom side of your hot tub cover causing mold and mildew growth. When mold and mildew build up in your cover it will eventually cause the cover to stink.
Can I use bleach to clean my hot tub?
If you are looking to disinfect your spa, we’re sorry to say that bleach has virtually no disinfecting abilities if chlorine is present in the water. To make matters even worse, bleach will likely throw off the pH of your water and lead to dry, itchy skin for users.
Can I use Armor All on hot tub cover?
Do not use protectants that have petroleum or alcohol in them, like Armor-All, which will damage the vinyl on hot tub covers. If you choose to use bromine, use as little as possible and make sure to wipe the surface of the cover down very well.
How do you clean hot tub shells?
Clean the Spa Shell Spray your hot tub shell with hot tub cleaner, diluted white vinegar, or diluted bleach. Use a soft cloth or non-scratch nylon scrubber to remove residue. Rinse all the surfaces well, and drain all the rinse water to prevent foaming when you refill your spa.
How do you take care of a spa cover?
Clean your spa cover monthly with mild liquid dish soap or hand soap diluted in water. Hose the cover off, and use an old towel to dry. Use cover wipes like our 303 Spa Cover Wipes, or apply a vinyl conditioner like Vinyl Protectant or Spa Cover Conditioner and Protector. Do not use an abrasive sponge.
How do you clean the bottom of a hot tub cover?
Fill a small spray bottle with a 10:1 solution of water to bleach (or a 10% solution of bleach). Remove the spa cover from the spa first. After spraying the plastic undersides, hose clean with fresh water and then towel dry or allow to air dry, before putting the cover back onto your hot tub.
Can you replace the vinyl on a hot tub cover?
You can with BeyondNice’s replacement hot tub cover vinyl skin! For our clients that need to replace the exterior vinyl skin only, we offer replacement hot tub cover vinyl skins.
How do you get the musty smell out of a hot tub cover?
Inspect your hot tub cover carefully for the black spots that indicate mold. Spray disinfectant cleanser or a mixture of bleach and water on any evidence of mold. Allow it to sit for 15 to 20 minutes, then scrub with a clean, damp rag, wipe and rinse.
How can I make my hot tub smell nice?
Make the hot tub fragrance by steeping the essential oil you’ve chosen in a mixture of vodka and distilled water. Simply mix 1/4 cup unflavored vodka with two cups of distilled water and 10-15 drops of essential oil in a clean container with an airtight lid.
Why do hot tub lids get heavy?
The main reason why the cover gets heavier with time is that the foam core becomes waterlogged. The water that’s being soaked into the core makes the cover heavy. And once that occurs the cover becomes not effective at protecting your hot tub from the elements.
Why is my hot tub cover so heavy?
The simple answer is that the hot tub cover foam core becomes waterlogged over time. This water soaks the core and is what is responsible for most of the weight. When this happens, you hot tub cover will become very heavy and your cover will no longer be as effective at protecting your hot tub from the elements.
Can you dry out the styrofoam from a hot tub cover?
Hot tub lids consist of a foam core inside a vinyl cover. Your hot tub lid might be beyond repair if it has taken on too much water, but before you resort to replacing it, try air-drying the foam core.
Why is my hot tub filter slimy?
What Causes Biofilm Slime in Hot Tubs? Generally, hot tub biofilm comes from contaminants introduced by the people bathing, such as skin oils, deodorants, lotions and perfumes. Older or damaged filters, imbalanced water and ineffective sanitation can also lead to the formation of hot tub slime.
What is the white stuff floating in my hot tub?
There are two primary causes of the formation of white flakes in your hot tub: calcium scale deposits and biofilm. Calcium scale deposits occur when there’s an excess of calcium in the water, also known as hard water. As calcium accumulates in the water over time, white flakes will start to form.
Why is my hot tub filter Brown?
A stained filter may not be a bad thing, if it doesn’t affect filter capacity, or even dirt distribution, or length of time between cleanings. Metals such as iron can stain a filter with a light brown orange stain. This will remove oils and minerals and most metal stains from hot tub filter cartridges.
