Table of Contents
Fill the washer with hot water; set at regular speed and the longest wash cycle. Add 3/4 cup of a water softening additive which can be found in the laundry detergent aisle (baking soda or vinegar can be substituted). Allow washer to complete entire wash and rinse cycle. If odor lingers, repeat entire process.
Where is the filter on a GE top load washer?
Top Load Washer – Lint / Pump Filters There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator. During drain down and spin, the water forces the lint off the bottom of the filters and down the drain. These filters should never require cleaning or replacement.
How do I use the self clean on my GE washing machine?
Open the washer door and pour one cup or 250 ml of liquid bleach or other washing machine cleaner into the basket. Close the door and select the SELF CLEAN cycle. Push the Start pad. When the Self Clean cycle is working, the display will show the estimated cycle time remaining.
How do you clean the filter on a GE top load washer?
The quickest way to clean out your filter is to remove it from the unit and soak it in hot water, loosening any clog or trapped residue. If the filter cannot be removed, clean it out with brush. Some filters are disposable, so instead of cleaning them you can just throw them away and put a new one in place.
What is deep clean on GE washer?
Starting in 2019, many top-load washers offer a DeepClean cycle that helps boost cleaning power by up to 67% (compared to the Colors or Whites cycle). With longer agitation and soak times, this cycle helps clean even the most stubborn stains, like dirt or grass.
What does tub clean mean on GE washer?
Clean the Washer Tub: Clean the tub once a month to keep the wash basket free from soap and fabric softener residue that can build up and cause an odor. For models with a BasketClean cycle: Use the BasketClean cycle and 1 cup of bleach or a commercially available product manufactured for this purpose.
Do top-loading washing machines have a filter?
“Top loaders tend to have filters on the valves,” said Amber Peabody, Service Manager at Dunnett Inc. The valve filters sift the water going in and out of the pump and hoses. If you do happen to have a removable filter, consult your owner’s manual on how to properly remove it.
Where is the lint trap on a washing machine?
Your washer’s lint filter may be within the center agitator of a top-loading washer. Remove the cover and check for a lint trap that can be cleaned. A removable lint screen may also be located along the washer drum’s top rim. Mesh lint traps are also commonly found in washer drain hoses.
How do you get the smell out of a top load washing machine?
Baking Soda & Vinegar Wash Mix ¼ cup of baking soda with ¼ cup of water and add it to your machine’s detergent container. Use four cups of plain white (not apple cider) vinegar to a top-load machine or two cups to a front-load model. Pour the vinegar into the drum. Run a high-temperature cycle.
How do I get the funky smell out of my washing machine?
Bring out the vinegar. Pour two cups of white vinegar into the drum, then run a normal cycle at high heat—without any clothes, of course. The baking soda and vinegar should break up any residue stuck to your drum and kill any mold that might be present. They’ll also help remove any foul odors.
Does GE washer have a filter?
GE Washer Filters Washing machine filters can be found along the top rim of the drum, at the end of the drainage hose, under the center agitator’s cover or in the front of the unit behind a small hatch. However, keep in mind that newer models do not even have separate filters.
Will white vinegar clean washing machine?
Vinegar and baking soda offer one of the most effective ways to clean your washing machine. Next, tip 250ml of white vinegar into the drum, then run your washing machine on a 60°C cycle. The two ingredients will work together to break down any grime and residue, as well as neutralising any musty odours in your machine.
What is the sanitize cycle on GE washer?
The GE Appliances’ Sanitize cycle uses elevated water temperature and a longer wash cycle to kill bacteria, and a pump purge and extended rinse removes contaminants. The GE Appliances’ Sanitize with Oxi cycle is designed to remove bacteria when using an Oxi additive with detergent.
Why does my top loading washing machine smell like mildew?
Washer odors (like mildew) are usually caused by leaving the washer lid closed when the washer is not in use. This does not allow air to circulate and dry out the moisture remaining in the tub area. When the washer is not in use, leaving the lid up/open for air circulation will help prevent odor.
Do you put detergent in for tub clean?
Add liquid chlorine bleach, powder cleaner or tub cleaner. Don’t add any laundry detergent or fabric softener when using TUB CLEAN. If you’re using a tub cleaning product follow the directions indicated on its packaging.
Can I use vinegar for tub clean cycle?
Run the biggest cycle at the hottest temperature or use the “clean tub” setting on the washer. At the end of the cycle, add vinegar to the liquid dispenser tray or washer tub. Use 2 cups for a front-loading machine or 1 quart for a top-loading machine. Run another hot water wash cycle.
