Table of Contents
What do the numbers on silhouette blade mean?
Blade Number – This setting indicates the amount of blade exposed from the blade tip in 0.1 mm increments. The higher the number, the more blade that will be exposed, and therefore the deeper your cut will be. If your cuts are too deep, you can reduce the blade number and decrease the exposed blade tip.
Are all silhouette blades the same?
Each blade is standard size, meaning that you can (mostly) use the same blade in your Curio as you do in your Portrait or Cameo. The Deep-cut Blade should only be used in your Cameo 3 or Curio and the AutoBlade should only be used in your Cameo 3. Silhouette blades can last up to six months.
What should my silhouette blade be set at?
The default cut settings put the blade depth to a “1” which means the machine will adjust the Autoblade to a depth of “1” before cutting. However, a blade depth of “1” is often not deep enough for a clean cut on vinyl. A blade depth of “2” is better.
What is the silhouette craft blade used for?
The 2mm Kraft (Craft) blade allows you to cut specialty craft materials, such as acetate, felt, craft foam, cork sheets, balsa wood, burlap, leather, and more. Recommended for use with a strong grip high tack mat.
How do you know when your silhouette blade is dull?
When do you need to replace a Silhouette blade? You will know that your blade needs to be replaced when it is no longer cutting cleanly. If you start to see ragged edges or small tears in your cut lines, the blade is too dull.
What is the thickness setting on the Silhouette Cameo?
So let’s say you start out with your blade depth set at 3 and it doesn’t cut all the way through, first try it with double cut and if that doesn’t work, then try setting it at 4. If 4 doesn’t work, try double cut again and if that doesn’t work, then try 5, etc.Silhouette Cameo Blade Settings Guide & Cameo Tips and Tricks. Blade Setting Material 7-10 Thick materials such as canvas.
Can I use a cameo 3 Autoblade in Cameo 4?
While there is a different Kraft Blade that is compatible with the Cameo 4 only, the 2mm Kraft Blade can be used with the Cameo 3 and the Portrait 2. But an adapter is required to use the 2mm Kraft Blade with the Cameo 4. We hope this information about the tool adapters has been helpful!Oct 4, 2019.
Can cameo 3 Use Cameo 4 blades?
The Silhouette CAMEO 4 Autoblade is not an option as it can not be used in the CAMEO 3. The manually adjustable ratchet blade can be used in every Silhouette machine including all models of the CAMEO, Portrait, and Curio.
What blades can I use with Cameo 4?
The Silhouette CAMEO 4 can also take the new Silhouette Rotary blade, the Kraft blade, and the Punch tool. These tools are all exclusively to be used in the CAMEO 4’s right carriage, Carriage 2.
How do you set the silhouette blade?
To adjust the blade setting, place the blade into the adjustment socket so the arrow on the socket lines up with the red line on the blade. A ratchet cap, which is included with each blade can be used also. 4. Turn the blade to the desired number.
What setting should cameo 4 be on to cut vinyl?
The default cut setting for Heat Transfer Vinyl, Smooth is 4.
What is Kraft blade used for in cameo 4?
The 3mm Kraft Blade for the Cameo 4 allows you to cut specialty craft materials, such as acetate, craft foam, and leather. The 3 mm depth is designed specifically to take advantage of the increased clearance the Cameo 4 has to cut even thicker materials.
Why is my silhouette cameo not cutting all the way through?
The most common cause for the Silhouette CAMEO 3 not cutting or not cutting through is a problem with the blade – specifically the Autoblade. If you are using the Autoblade in your CAMEO 3 it’s important to make sure it’s loaded into the blade carriage correctly to ensure it cuts.
Where is the thickness setting in silhouette studio?
If you’re wandering around Silhouette Studio V4 looking for the “thickness” setting you’re never going to find it. The thickness setting has been completely replaced in Silhouette Studio’s V4 Send panel.
How can I make my silhouette cameo cut deeper?
The trick to cutting thicker materials in the Silhouette CAMEO is to make sure they clear the white rollers. In other words, you want the material centered on your mat approximately between the 2″ box and the 11″ box. It’s when these thicker materials go under the rollers where you run into trouble.
What setting do I cut cardstock on Silhouette Cameo?
To cut regular cardstock on your Silhouette, use these cut settings: Blade: 4. Speed: 4-8 (use a slower speed for designs with lots of details, but a higher speed is great for designs with lots of straight lines) Force: 24. Passes: 1.
Can I use Silhouette Premium blade on Cameo 4?
The Premium Blade can be used with any version of the Silhouette Portrait®, Silhouette CAMEO®, and Silhouette Curio™.
Can cameo 4 Use premium blade?
Like the Autoblade, the Silhouette CAMEO 4 Premium Blade can be used for a wide assortment of materials from vinyl to paper to sticker sheets to HTV and faux leather. Place the blade in Carriage 1 in a CAMEO 4 machine. Make sure there’s no gap.
Can a Cameo 4 cut wood?
The 3mm Kraft Blade for the Cameo 4 allows you to cut specialty craft materials, such as acetate, craft foam, burlap, felt, balsa wood, and leather. The 3 mm depth is designed specifically to take advantage of the increased clearance the Cameo 4 has to cut even thicker materials.
