Table of Contents
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
What size pulls for 36 inch cabinets?
Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
What is the most common cabinet pull size?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.
Can you mix cabinet pull sizes?
There’s no “rule”, it’s a matter of looking at as many kitchens as possible and figuring out the look you prefer. I also used a variety of sized pulls on drawers of different widths, and used Restoration Hardware.
Should cabinet pulls be vertical or horizontal?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
Should I use knobs or pulls on kitchen cabinets?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.
What size pulls for 36 inch drawers?
Oversize Drawers (36″ or larger) For larger drawers, consider investing in longer-length stainless steel pulls such as 6”, 8”, 10” or even 12”. Another alternative to this is by using double smaller pulls, such as two 3” or two 5” pulls.
Do you put handles on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
Should my kitchen cabinet pulls match my faucet?
Most of the time the kitchen faucet should match cabinet hardware!” But, sometimes strategically placing different metals next to each other can work for you, add interest or even make a statement.
How big should appliance pulls be?
The most common sizes of appliance pulls, in order of popularity, are 12”, 18”, 8”, 7” and 15”. Appliance pulls typically mount onto ¾” thick wood panels affixed to the appliance, rather than to the appliance itself. While fridges and freezers are the most common panel-ready appliances, they are not the only ones.
Do hinges and pulls have to match?
Door handles, fixtures and fittings, and other hardware don’t have to match exactly, but they should blend together to make a harmonious space. If you want a cohesive aesthetic, select hardware that’s a similar colour to the finish on your fixtures and appliances.
Should cabinet pulls all be the same size?
Consistent Size Throughout There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably.
How wide should drawer pulls be?
Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
Where should Pulls be placed on cabinets?
Pulls. Pulls are another versatile option that can be installed on both cabinets and drawers. For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. For drawers, they should be installed horizontally in the center of the door.
Do cabinets look better with hardware?
Cabinet hardware should match existing metalwork such as your sink faucet, or appliances. This creates a unified look in any kitchen or bathroom. There is a time and place to mix and match finishes… but not with hardware.
Are knobs or pulls better?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
What is the difference between a knob and a pull?
Pulls require more measurement: While knobs only have one screw attachment, pulls are attached to a cabinet drawer or door by two or more screws. Pulls are a great choice for doors: For doors, pulls are more comfortable and don’t require as much effort as a smaller knob.
