Table of Contents
How-To: Choose Cabinet Hardware Types of Cabinet Hardware. Knobs have smaller profiles than handles, are less expensive, and can be used for both drawers and cabinets. Pulls are larger than knobs, make more of a statement, and tend to be easier to grip. Select a Style. Choose a Finish. Don’t Be Afraid to Mix Metals.
How do I know what hardware to get for my kitchen cabinets?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
Should kitchen cabinets have knobs or pulls?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.
What type of cabinet knobs are in style?
Cabinet Hardware Trends in 2021 Minimalist Style. No Hardware. Matching Cabinets. Cylinder Bar Pulls. Square Bar Pulls. Simple Knobs. Farmhouse Style. Matte Black.
Can you mix knobs and pulls on kitchen cabinets?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
What hardware looks good on white cabinets?
Hardware on white cabinets will stand out and steal the show, so it’s a great opportunity to go bold! If you have warm tones, go with gold, black, or bronze hardware. If you have a cold grey tone, then silver, pewter, black, and stainless steel hardware will work.
Should cabinet pulls be vertical or horizontal?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
Should my kitchen cabinet pulls match my faucet?
Most of the time the kitchen faucet should match cabinet hardware!” But, sometimes strategically placing different metals next to each other can work for you, add interest or even make a statement.
Do cabinets look better with hardware?
Cabinet hardware should match existing metalwork such as your sink faucet, or appliances. This creates a unified look in any kitchen or bathroom. Pick the same knobs and pull for the entire room, and make sure it matches the main finish in the room.
Are knobs or pulls better?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
What metal finish is in Style 2021?
Some of the newest kitchen cabinet hardware ideas include matte black and satin brass finishes. Matte black in particular, will be incredibly popular for 2021 and going into 2022. In fact, matte black is trending in all forms of hardware – from cabinets to door knobs and light fixtures.
What metal finish is in Style 2020?
New finishes coming to the fore in 2020 are Vintage Pewter, Rustic Brass, Graphite Nickel (Gunmetal) and Satin Brass. Some of these are living finishes and carry with them elegance and antique elegance.
Is Brushed nickel out of style 2021?
As a general rule, brushed nickel is a classic finish that is an excellent choice for either kitchen or bathroom hardware. While brushed nickel may not be one of the top finishes for 2021, it is certainly a safe option that will not require updating any time soon.
What size should cabinet pulls be?
Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
Should pulls match hinges?
Should hinges match door knobs? And there’s no hard and fast rule when choosing, generally if your hinges are exposed they should match your handles and knobs finishes. You can easily hold the hinges and knobs or handles against the finish of your doors and cabinets to see which colours and styles go best together.
What is the difference between a knob and a pull?
Pulls require more measurement: While knobs only have one screw attachment, pulls are attached to a cabinet drawer or door by two or more screws. Pulls are a great choice for doors: For doors, pulls are more comfortable and don’t require as much effort as a smaller knob.
Should cabinet hinges be painted?
This can be especially helpful if you’ve got old hinges in a funky, outdated color. But don’t just take a paintbrush to those hinges. Hinges painted with regular paint will scuff over time, leaving an eye sore. Instead have your hinges powder coated to match your cabinets.
Do you paint cabinet hinges?
New cabinet door hinges are costly, and you can save a substantial amount of money by repainting old hinges yourself. A top-quality paint will give the hinges a professional-looking finish. Remove the hinges from the doors, using a drill.
What handles go with white cabinets?
For white cabinets, the best color knobs to use are either timeless and classy silver knobs, elegant brass, traditional bronze, or a bold, contrasting color like black knobs. It really depends on the style and finish of the cabinets that will help you decide which knob color will suit your decor.
Where should Pulls be placed on cabinets?
Pulls. Pulls are another versatile option that can be installed on both cabinets and drawers. For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. For drawers, they should be installed horizontally in the center of the door.
Do you put hardware on false drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
Where do you put cup pulls on drawers?
Cup Pulls: Cup pulls are only ever used on drawers, and I like to center them in the middle of the drawer slab. If you have a 5 piece drawer (top and bottom rails, inside panel, and side rails) you want to make sure the hardware itself will fit (centered) in the middle panel before purchasing and installing.
