Table of Contents
How do I choose a circular saw blade?
Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
Which saw blade makes the smoothest cut?
With fewer spaces between the teeth, crosscut blades remove less material, resulting in a smoother cut. It also means it takes these blades longer to move through wood. Crosscut blades are an excellent choice for finish carpentry and other applications that require precision and a smooth finish.
What size circular saw will cut a 4×4?
The best way to cut a 4×4 post is by using a 12-inch miter saw, 10-inch radial arm saw, both of which can cut completely through a post in one pass, or a standard circular saw that can make precise cuts in two passes with the help of a simple jig.
Can I use a larger blade on my circular saw?
Can I use larger blades? Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″). The reason for that is that for safety reasons most saws are built to tight tolerances.
Is more teeth on a saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish. The teeth are designed to cut aggressively, and deep gullets provide good chip removal.
What is a 60 tooth saw blade used for?
It’s better suited for cutting melamine, chipboard, and plywood. Usually 60 to 80 teeth (on a 10″ blade) with shallower gullets between teeth and a more gentle forward rake around 10°.
How many teeth should my saw blade have?
Why does having the right number of teeth on your saw blade matter? Number of teeth touching the material Expected outcome Less than 2 teeth A really rough cut that may rip and tear your material 2 to 4 teeth A nice smooth cut More than 4 teeth A very slow cut that may cause burn marks on the material being cut.
Can I use a 7 inch blade in a 7 & a quarter inch circular saw?
The only fine-tooth blade you have lying around is a 7 ¼ inch size. The short answer to the above questions is that you can generally use a smaller blade in a circular saw – within reason. Of course, there will be some drawbacks and changes in performance, especially when you size down by a significant margin.
Can you use any blade in a circular saw?
What is this? Not every circular saw is adequate for each material, which means that the blades are made according to whether you need them to cut wood, metal or concrete. Along with that, it is a fact that a single circular saw may need different special blades that aren’t universal or interchangeable.
What makes a good circular saw blade?
Generally, a blade with a low tooth count cuts rapidly, whereas a blade with a high tooth count creates a smoother finish. However, the material itself has a big impact. Sawdust is much larger than swarf (metal particles), so a wood-cutting blade must have fewer teeth to clear the waste and avoid binding in the cut.
Can a 6 1 2 inch circular saw cut a 2×4?
The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
Are most circular saw blades are carbide tipped?
A thin-rim fine-tooth circular saw blade is used for cutting thick pieces of wood, such as a 2 by 4. Most circular-saw blades are carbide-tipped.
Are Diablo blades worth it?
The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws. These blades were used and tested with a Dewalt DW745 table saw, and a Makita LS1016L sliding compound miter saw.
Which size circular saw is best?
The most common and useful size for DIYers is 7 and 1/4 inches. Saws this size will cut through material more than 3-inches thick, and they also offer the widest variety of blade choices for cutting substances other than wood.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!.
Can a 10 inch blade cut a 4×4?
It may surprise you to know that the answer in question to cutting 4×4 posts with a miter saw is a hard, YES! If you can give the blade more clearance, then it should be possible to get a clean single pass cut through a 4×4 post, even when utilizing a 10-inch blade.
