How To Check Tire Tread

Simply insert a penny into your tire’s tread groove with Lincoln’s head upside down and facing you. If you can see all of Lincoln’s head, your tread depth is less than 2/32 inch and it’s time to replace your tires.

Is the penny test for tires accurate?

For years, motorists have been told the “penny test” is an accurate indicator of whether or not you need new tires. The test is conducted by sticking a penny head down in a tire tread; if you see all of Lincoln’s head, then you should change the tires. The one with an eighth of an inch of tread stopped in 300 feet.

What are three ways to check the tire tread depth?

If you see irregular wear, it’s definitely an indication that you might need to have your tires balanced. There are basically three ways to measure tread depth: the quick-and-dirty way, the quicker-and-dirtier way, and the right way.

How do you tell if you need new tires with a quarter?

The Quarter Test Insert a quarter into the tire tread upside down, with Washington’s head going in first. If the top of George’s head is covered by the tread, your tires are OK – do this test at multiple points around each tire. If the top of his head is visible at any point around the tire, you need new tires.

How do you check tire tread with a nickel?

With just a nickel between your thumb and pointer finger, angle Queen Elizabeth upside down, facing down toward the ground. Proceed to stick the nickel into various places in the tread across all your tires. If you can see the top of the Queen’s crown, it’s time to get a brand-new set of tires.

Is 7 32 A good tire tread depth?

A tread depth gauge is the most accurate way. 6/32″ or higher: Your tire’s tread depth is sufficient. 5/32″: If snow-covered roads are a concern, you should consider replacing your tires. 4/32″: If you frequently drive on wet roads, consider replacing your tires.

How do I check my tire tread with a penny?

Tire tread is composed of several ribs. Turn the penny so that Lincoln’s head points down into the tread. See if the top of his head disappears between the ribs. If it does, your tread is still above 2/32” , If you can see his entire head, it may be time to replace the tire because your tread is no longer deep enough.

How do I know when to get new tires?

A super-easy way to check your tire tread With President Lincoln’s head pointed down, insert a penny into the grooves on your tire tread. If any part of Lincoln’s head is hidden by the tire tread, your tires are fine. Otherwise, your treads are too shallow and it’s time to replace your tires.

How often should tires be replaced?

When Should You Replace Your Vehicle’s Tires? As a general rule, the National Highway Traffic Safety Administration (NHTSA) recommends that drivers change the tires on their vehicles every six years.

Do you use a penny or quarter to check tire tread?

Simply insert a penny into your tire’s tread groove with Lincoln’s head upside down and facing you. If you can see all of Lincoln’s head, your tread depth is less than 2/32 inch and it’s time to replace your tires.

How long do the average tires last?

On average, people drive between 12,000 to 15,000 miles a year, which means the average good quality all-season tire will last somewhere between three and five years, depending on maintenance, driving style and conditions, etc.

How do you know if your tires are bald?

A penny is the perfect tool for ensuring that your tire tread is still acceptable. To perform the penny test, place a penny in the channel of your tire’s tread with Lincoln’s head down into the tire. If you’re able to see the top of Lincoln’s head once the coin is settled into the tire, your tires are officially bald.

How do you know if you have a bad tire?

If you can see Abe’s head using the penny, the tread is too worn and the tires need to be replaced right away. Bulges or blisters. If you see a bulge or blister on the sidewall, replace the tire at once. These signal potential weak spots that could lead to tire failure.

Is 80 percent tire tread good?

Here’s what the heck that means: 2/32nds of tread is the legal minimum of tread you need on your tires to pass inspection in most states. Most tires have 10/32nds of tread when new, and when 80 percent of the tread has worn down, or its reached 2/32nds, it’s time for new tires.

Is 60 percent tire tread good?

Used tires tread can be up to 90%, but the average is 6-8/32”. Tires in good condition should have a minimum of 6/32” to be useful, or 4/32” if the tire is 13-14”. The average legal minimum tread depth is 2/32”, but driving becomes unsafe with such a tread.

What percent tread is 8 32?

8/32″ of useable tread depth. A tire that starts with 10/32″ of original tread depth has 12.5% wear for every 1/32″ that is worn away, and a tire that starts with 12/32″ ” of original tread depth, has 10% wear for every 1/32″ that is worn away, etc.