Table of Contents
To recharge your PAX 2, connect the included USB charging cable to a USB power source. The magnetic cradle holds the device while charging. The lights will turn a solid white when PAX 2 is charged. The device reaches full battery in 2+ hours.
How do you charge a PAX?
To charge your PAX device, lay the portable vaporizer onto the magnetic charging dock, where it will be held securely in place. The PAX 2 recharges in approximately 2 to 3 hours, while PAX 3 takes around 90 minutes and PAX Era will return to full battery in around 45 minutes.
How do you know a PAX is charging?
PAX is fully charged in two hours. When placed on the charging platform, the PAX LED will shine orange. At 80% battery charge (around 90 min) the LED will shine a steady green. Most PAXers report an average of five oven-loads before needing to recharge their PAX battery.
How do I fix my PAX 2 not charging?
If your PAX 2 won’t charge, try pushing in the copper pins on the back of the device using a needle. Push them in individually. Then reconnect the PAX 2 to the charging dock, making sure the USB cable is firmly plugged into the back of the charger and your power source.
What do the colors mean on PAX 2?
Battery Levels – Shake Pax to check your battery level: red blinks = less than 10%, yellow blinks = less than 80%, green blinks = 80% – 100% Charging – Pax will shine orange while charging and will turn green when your battery reaches at least an 80% charge.
How long does it take to charge the PAX 2?
PAX 2 uses an internal Lithium Ion battery. If charging via USB cable, it will take around 3 hours to fully charge. If using the AC wall adaptor (available as an accessory, not included with the device) it will take around two hours to fully charge.
How do you charge a portable vape?
The portable vape charger type can vary from device to device. Many vape pen models screw into a USB adapter, which can be connected directly to a USB power source. Others utilize micro USB charging ports. All PAX devices arrive with the charging cables in the box.
How do you turn the heat up on a Pax 2?
To adjust the temperature setting, place PAX 2 into temperature set mode by pressing and holding the button until the LED indicator responds. Continue to short-press the power button to cycle through the four temperature settings: One green petal – 360°F (180°C) Two yellow petals – 380°F (193°C)Aug 29, 2019.
Can you use pax while charging?
Is it possible to use the pax 2 while charging? You can’t. It does not have pass through charging.
What is Party Mode on PAX 2?
Alternate Party Mode In this mode all the petals on the logo begin stationary, then whenever the Pax 2 is moved the lights begin a random lights show in which all the lights will cycle through the same color at the same time.
How do I know when my Pax era is fully charged?
Charge the PAX Era Life by connecting the cord to a charging dock, power station, or USB port on your computer. All four arms of the light up X will gently flash as the device charges. Once fully charged, all four arms of the X will glow bright white for several seconds, fade, and repeat.
How long does it take to charge a Pax era?
The Era device features a 240mAh Lithium-ion rechargeable battery. Time to full charge is approximately 45 minutes via the micro USB to USB cable included in your device kit. Devices may require charging out of the box before using for the first time.
How long does it take for a vape battery to charge?
Charging time depends on they size and type of your battery. Once your vape pen is plugged in, it can take as little as 30 minutes, but up to several hours to fully charge. On average though, most people find their vape pens take only a few hours to be charged and ready to go.
Can I bring PAX on a plane?
According to the FAA’s “Pack Safe” page, e-cigarettes and vaporizers are allowed in carry-on luggage, with this note: So it’s possible to carry on your Pax, as long as it has no trace of marijuana in it. Always be mindful of the marijuana and paraphernalia laws in your home state and other places you’re traveling to.
How do I get the most out of my PAX 2?
PAX 2 Tips & Tricks Grind. Grind your material as finely as possible. Pack. The PAX 2 works best tightly packed, helping the heat spread throughout the bowl. Draw. Like most conduction vaporizers, pulling too hard will overwhelm the heater, and your vapor will be wispy. Should I stir? Flip it!.
Is my PAX hitting?
While PAX is pulsing purple, indicating it’s heating up you should know the following: PAX does the work for you and creates vapor in the oven through direct contact, gently heating your material. Drawing a lot of air through the device won’t create more vapor, you will just be inhaling hot air.
How do I turn off my Pax 2 vaporizer?
Turning off and turning on your PAX 2 Activate the portable vaporizer by pressing down on the center of the mouthpiece. Depress the mouthpiece quickly and lightly; all it takes is a gentle short press to turn on and turn off your vaporizer.
What kind of charger does a Pax use?
PAX 2/3 USB Charger (cord + dock) Complete charging kit with one charging cradle and USB cord.
Is Pax 2 conduction or convection?
The Pax 2 is a conduction unit meaning that the herbs are being heated from the surfaces of the bowl during the entire session and its best to finish the entire chamber in one sitting to avoid wasting any herbs.
What temperature should I set my Pax?
What are the PAX Era’s temperature settings? Low: The device will warm to 520°F. This setting is represented by a single lit “petal” on the device’s LED indicator. Medium low: The device will warm to 610°F. Medium high: The device will warm to 700°F. High: The device will warm to 790°F.
What happens when you turn the PAX 2 three times?
They’re all random, so each PAX 2 feels like it has its own personality. To see which your PAX 2 has, roll it horizontally three times. Every three rotations will change it to a new mode.
Should you hit a vape while its charging?
Research suggests that it is excess heat which is most likely to damage your lithium-ion battery. Vaping while charging will mean that your battery takes longer to fully charge.
Can you use a vape plugged in?
Some vape kits have ‘pass-through technology’, which means the device can be used while it’s on charge. We do not recommend vaping while your device is charging if the kit uses external batteries (such as 18650 and 26650, for example).
How do you change the battery in a Pax?
STEP 1 — Drill baby Drill. STEP 2 — Slide the guts out. STEP 3 — Disconnect the battery. STEP 4 — Remove the bad cell. STEP 5 — prepare the new cell. STEP 6 — Connect the new cell. STEP 6 — Re-install the outer shell. STEP 7 — Cry a little.
