Table of Contents
How to Change Spark Plugs Safety First. Park your vehicle on a flat, dry surface and ensure the engine is cool. Remove the Spark Plug Wire. Remove the Coil On Plug (COP) Unscrew the Spark Plug. Put in the New Spark Plugs. Re-install the Spark Plug Wires or Ignition Coils (COP) Start Up the Engine.
Can I change my spark plugs myself?
Like rotating tires or changing oil, replacing spark plugs is a job that can be easily, and inexpensively, done in the confines of your own home. Although they don’t need maintenance as often as the other two tasks, spark plugs are equally as important and require consistent monitoring.
Do you need a special tool to change spark plugs?
You’ll need just a few tools to change out the spark plugs on your car. The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Use a torque wrench to make sure you don’t over-tighten your plugs.
What are the symptoms of a bad spark plug?
What are the signs your Spark Plugs are failing? Engine has a rough idle. If your Spark Plugs are failing your engine will sound rough and jittery when running at idle. Trouble starting. Car won’t start and you’re late for work… Flat battery? Engine misfiring. Engine surging. High fuel consumption. Lack of acceleration.
How do you remove a spark plug?
Gently grasp a spark plug wire by the boot (the place where it connects to the spark plug), twist it, and pull it straight out. Never yank on the wire itself (you can damage the wiring). The shiny thing sticking out of the engine block after you remove the wire from the spark plug is the terminal of the spark plug.
How much does it cost for spark plug change?
Spark plugs are incredibly inexpensive, often costing less than ten dollars apiece. Now you may need to replace several at once, but it still won’t cost very much. The typical amount you will pay for spark plugs is between $16-$100, while for labor on a spark plug replacement you can expect to pay around $40-$150.
How long does it take a mechanic to change spark plugs?
Changing spark plugs takes about an hour (for a four-cylinder engine) and will save you at least a hundred bucks in labor if you do it yourself. In most cases it’s a simple job that will help to maintain peak performance and the highest possible gas mileage.
When changing spark plugs What else should I change?
Whenever you change spark plugs, it is a good idea to replace the ignition wires and vice versa. This will keep your vehicle running at peak performance and prevent you wasting money on unburned gasoline. In fact, a sudden drop in gas mileage may be an indicator that your ignition system is not functioning properly.
What size socket do you need to remove a spark plug?
Most spark plugs require a 5/8″ (16mm) size spark plug socket. This refers to the size of the flats on the spark plug that are in contact with the socket. This spark plug requires the 5/8″ spark plug socket, which will probably fit a 3/8 ratchet extension.
What does a tune up consist of?
Generally, a tune-up consists of checking the engine for parts that need cleaning, fixing, or replacing. Common areas under inspection include filters, spark plugs, belts and hoses, car fluids, rotors, and distributor caps.
Can you drive a car with a bad spark plug?
Driving With Faulty Spark Plugs Malfunctioning spark plugs cause engine problems including, misfires, hard starts, reduced gas mileage, rough idling, and lack of acceleration. Driving with a faulty spark plug will be difficult because the engine might fail to function.
How do you check spark plugs without removing them?
Test the spark plug ignition by disconnecting the spark plug wire from the spark plug. Hold the end of the spark plug wire close to a metal surface. If the spark plug is good, you will see a spark or you’ll hear a crackling noise. This means that voltage is getting through the wire to the spark plug.
What can dirty spark plugs cause?
When the spark plugs get dirty, they cease to operate correctly. We refer to this as ‘fouling’. If your spark plugs are fouling, they will cause the engine to run rough, lack power, use more fuel, or even not run at all.
Why is it so expensive to replace spark plugs?
Since replacing the plugs is no longer an annual service, most vehicle manufacturers stopped making them accessible. Today, replacing the plugs may require removing the intake manifold and a lot of other work to reach them.
How often should spark plugs be changed?
And as a general rule, we recommend replacing spark plugs every 30,000 miles, which falls in line with most manufacturers’ recommendations. You can check your owner’s manual or the manufacturer’s website for information specific to your make and model vehicle.
Should you change all spark plugs at once?
Q: Should You Replace All Spark Plugs At Once? A: Yes, as a general rule, it’s better to replace all plugs at the same time to ensure consistent levels of performance.
What is the life of spark plugs?
A standard copper spark plug has an average life span of 10,000-20,000 miles. Silver plugs, used for older vehicles, can last up to 20,000 miles. Expensive iridium spark plugs or platinum spark plugs can last 60,000 miles. Extended life spark plugs or long life spark plugs can last 100,000 miles.
How long do spark plugs last UK?
A good set of spark plugs should last in the region of 30,000 miles, so it’s best to keep a record of when they were last changed so you know whether you need to think about changing them.
How often should I do a tune-up?
Most older vehicles with non-electronic ignitions should be tuned every 10,000 to 12,000 miles or every year, whichever comes first. Newer cars with electronic ignition and fuel injection systems are scheduled to go from 25,000 miles to as many as 100,000 miles without needing a major tune-up.
