Table of Contents
How do you change filaments in Ender 5?
*Plug the power cord into a three-hole power jack. Press and hold the extruder lever then insert 1.75mm filament through the small hole of the extruder. Continue feeding until you see filament come out the nozzle.
How do you change the filament on a 3d printer?
How to Change Filament Select Filament > Unload Filament. The Smart Extruder+/Smart Extruder will start to heat up. Open the filament drawer and remove the old spool. Select Filament > Load Filament. Wait for the Smart Extruder+/Smart Extruder to heat. Cut the end of your new filament to create a clean edge.
How do you remove a filament?
Removal of current filament Step 1: Preheat your hot end based on the temperature guidelines of your current filament. Step 2: Wait until the hot end heats up to the required temperature. Step 3: Manually extrude a small portion of the filament. Step 4: Push down the coupling to release the filament from the hot end.
How do you fix filament jam?
Try and keep the filament as straight as possible. Natural or clear coloured filament works best so you can see the residue when you pull it out. If your hot end is too clogged to get anything out of the hot end, take a thin wire and a pair of plyers and stick it into the tip of the nozzle to clear the blockage.
How do you change the filament in the middle of a print?
Carefully remove the filament from the extruder and load the new filament. Slowly push the filament through the PTFE tube and hot end. Once you feel resistance when pushing the filament, look at the nozzle. Continue to gently push the filament until you see the new filament coming out of the nozzle.
How do I connect my ender-5 to my computer?
Ensure your USB cable is connected and turn on your printer. Startup your OctoPrint server and access through the webUI. In Cura/Creality Slicer go to Preferences, then Printers, select your printer and there should be a button “Connect OctoPrint”.
Do I remove filament after printing?
Do You Have to Remove Filament After Printing? Most people experience no serious problems after leaving the filament in the extruder. However, there can be a few exceptions too. Whether to remove filament immediately or let it stay overnight, basically depends on the filament type.
How do you remove a tube filament?
Stick something long and thin down the tube and push the broken filament out. An easy way to do this is by using a piece of fresh (non-brittle) filament. Alternatively, you can use a long metal rod like a thin welding rod, or my favorite, a guitar string.
What temp should pla be printed at?
What temperature to print PLA? In general, PLA filament settings have an optimal printing PLA temperature range from about 185C to about 205C. If you’re using 1.75mm as opposed to thicker 2.85mm (or 3.00mm) your optimal print will be closer to the lower end of this PLA filament temperature range.
How do you remove PLA from nozzles?
The quick way – ABS and/or PLA You’ll need a blow torch, welders gloves (or something to protect your hands from the flames/heat), and a long handled set of pliers. Light the torch. Use the pliers to grasp the nozzle. Use the blowtorch to burn away the plastic in the nozzle. Take care to NOT overheat the nozzle.
Why does filament keep getting stuck?
Filament jams happen when the extruder can’t push filament through the hot end. The extruder either grinds the filament until it’s so thin that the gear that advances the filament is no longer in contact with it, or the motor that drives the extruder stalls because it’s overloaded.
How do you stop filament grinding?
The slower rotation of the extruder motor can help avoid grinding issues. You can adjust this setting by clicking “Edit Process Settings” and selecting the Speeds tab. Adjust the “Default Printing Speed,” which controls the speed of any movements where the extruder is actively extruding plastic.
Why do nozzles clog?
Dust and Dirt When enough carbon builds up on the inside of the nozzle it can start to narrow the width of the nozzle opening, as well as begin to impede the flow of the print material. The end result can be a clog.
How do you change a filament on a cura?
From Cura’s main menu, choose Extensions->Post Processing->Modify G-Ccode. Click the “Add a script” button. Choose “Change filament at height” Enter the desired layer in the “Pause at layer” box.
How do I setup my Cura printer?
To add a printer to Ultimaker Cura, simply open the ‘Printer panel’ and select ‘Add printer’.Add printer overview Add a networked printer. This list contains all Ultimaker 3D printers available within your local network and cloud-enabled printers connected to your Ultimaker account. Add a non-networked printer. Add.
How do I connect my computer to a 3D printer?
Most 3D printers can be connected via USB to your computer. Just use the cable that comes with your printer and always use it at the same USB port when possible. Make sure this USB port is working properly so no later communication problems arise.
Can you use a 3D printer with a phone?
You can do your 3D printing work anywhere. There are apps for 3D printing that work on Android and iOS as well as desktops and laptops, and some that you don’t even need to download. With a 3D printer app, you can view files on the go, design when you need to, convert images from 2D to 3D files, and more.
How do you load and unload filament?
Manually Unloading Material: First heat up the hotend to the printing temperature of the material currently loaded. Release the tension on the extruder if possible. With tension relieved, push the filament gently into the extruder until you see a small amount extrude out the nozzle.